Danfoss MBT 5252 User manual

Installation Guide
Temperature sensor
type MBT 5252
© Danfoss A/S (IA-MS/IM), 2013-10 IC.PI.P30.E4.02 - 520B5833 1
084R9303 084R9303
Identication
Code number Elements Specication code
084Z3101 1 × Pt 100 0004-0500-4J00-0000
084Z3102 2 × Pt 100 0104-0500-4J00-0000
084Z2185 2 × Pt 1000 0304-0500-4J00-0000
Pos. 1 Protection tube, AISI 316 Ti
Pos. 2 Measuring insert, Pt 100, Silicon cable,
max. 200 °C, 40 mm steel tube
Pos. 3 Type B-head, Silumin
Pos. 4 Process connection, Brass with spring
Pos. 5 Clamping ring, Brass
Pos. 6 Union nut, Brass
Pos. 7 Union, Brass
Pos. 8 Clamping ring, Brass
Pos. 9 Support plate, Brass
Pos. 10 Terminal block
Pos. 11 Bush, Brass
Pos. 12 Gasket, Copper

2 IC.PI.P30.E4.02 - 520B5833 © Danfoss A/S (IA-MS/IM), 2013-10
3. Mount protection tube and terminal block in the B-head
4. Mount pos. 4 losely in the gearbox
5. Mount and tighten the protection tube
6. Tighten pos. 4
7. Check the spring function
Mounting
1. Cut the protection tube in the right lenght
2. Cut the wire in the right lenght and mount the wires on the
terminal block
084Z3101
084Z3102
10-12 Nm
Jumper
Jumper
Jumper
Red+black
White+black
Red
White