Danfoss AB-QM User manual

1
Installation Guide
AB-QM (DN 10-32) Setting tool
Heating Solutions VI.BP.G1.00 SMT/SI
Setting procedure:
Step 1a. Positioning of pre-setting tool
Setting procedure:
Step 1b. Positioning of pre-setting tool
Setting procedure:
Step 2. Mounting of lower part (1/2 turn)
Setting procedure:
Step 3a. Pre-setting (factory setting is 100%)
Position of indicator ring Button up Button rotating of desired setting Button down

Setting procedure:
Step 3b. Pre-setting (factory setting is 100%)
Setting procedure:
Step 4. Demounting the tool
Button up Shut off the valve
- rotate button
Position of indicator ring Button downRotate on desired setting
Unscrew the nut Disconnect the tool
Installation Guide AB-QM (DN 10-32) Setting tool
VI.BP.G1.00 Produced by Danfoss A/S © 11/2011