DART SYSTEMS DS100 User manual

[phone] [email protected]
www.dartsystems.co.uk
Dart Systems Ltd, Environment House, First Avenue, Westfield Industrial Estate,
Radstock, Somerset BA3 4BS
Environment House
First Avenue
Westfield Industrial Estate
Radstock
BA3 4BS
561-USER001 REV 2
DS100
TELESCOPIC
POLE CAMERA
USER GUIDE

[phone] [email protected]
www.dartsystems.co.uk
Dart Systems Ltd, Environment House, First Avenue, Westfield Industrial Estate,
Radstock, Somerset BA3 4BS
1
TELESCOPIC POLE CAMERA –USER GUIDE
CONTENTS
DS100 Monitor Controls
Telescopic Pole Camera Initial Setup
DS100 Initial Setup
DS100 Operating Functions
DVR System Settings
Set Time Date menu
Manual Capture menu
Auto Capture menu
Motion Detect menu
Advanced Setting menu
Using the Display controls
Using the DVR Controls
Screen Icons
Keypad Controls
Still Image Capture
Manual Record and Playback
Charging the Batteries
Powering the system from AC adapter
Quick Tips
Specifications
Notes
2
3
3
5
6
9
10
12
13
13
14
15

[phone] [email protected]
www.dartsystems.co.uk
Dart Systems Ltd, Environment House, First Avenue, Westfield Industrial Estate,
Radstock, Somerset BA3 4BS
2
TELESCOPIC POLE CAMERA –USER GUIDE
DS100 MONITOR
CONTROLS
2
3
7
4
1
5
6
1. On / Off Switch
2. Monitor Controls
3. Recording Controls
4. Battery Charge Socket
5. 12v Adapter Socket
6. SD Card Slot
7. Camera Connection Socket

[phone] [email protected]
www.dartsystems.co.uk
Dart Systems Ltd, Environment House, First Avenue, Westfield Industrial Estate,
Radstock, Somerset BA3 4BS
3
TELESCOPIC POLE CAMERA –USER GUIDE
TELESCOPIC POLE
CAMERA INITIAL SETUP
Attach the DS100 Monitor to the
Camera Pole using the mounting
bracket and star knobs provided.
Do not over-tighten.
DS100 INITIAL SET-UP
Connecting the interlink
cable
Connect the curly cable
(interconnect cable) to the 4-Pin
socket located on the reverse of the
DS100 and to the connector
located at the bottom of the
Camera Pole.

[phone] [email protected]
www.dartsystems.co.uk
Dart Systems Ltd, Environment House, First Avenue, Westfield Industrial Estate,
Radstock, Somerset BA3 4BS
4
TELESCOPIC POLE CAMERA –USER GUIDE
Insert the SD card into the DS100
Monitor and replace the rubber
cover to prevent water and dirt
ingress.
The DS100 Monitor is rated to
IP65, it is important that the
connectors and connector covers,
and SD card cover are in place to
provide this protection.
The DS100 Monitor allows for the
viewing, recording and playback of
MPEG 4 video files and JPEG
images.

[phone] [email protected]
www.dartsystems.co.uk
Dart Systems Ltd, Environment House, First Avenue, Westfield Industrial Estate,
Radstock, Somerset BA3 4BS
5
TELESCOPIC POLE CAMERA –USER GUIDE
DS100 OPERATING
FUNCTIONS

[phone] [email protected]
www.dartsystems.co.uk
Dart Systems Ltd, Environment House, First Avenue, Westfield Industrial Estate,
Radstock, Somerset BA3 4BS
6
TELESCOPIC POLE CAMERA –USER GUIDE
DVR SYSTEM SETTINGS
To Change the settings on each
screen:
Use the or to scroll up and
down the settings
Use the or to make change
to the settings
In each case, when complete,
press the ‘Settings’ button to
navigate to the next settings
screen, or ESC to go back to the
Preview screen where you can
create videos or take images.
CAM 1
SD
SETTINGS
Power-up the DS100 Monitor by
switching it on.
On power-up the ‘splash screen’
briefly appears followed by the
default screen.
Changing Default Settings
Press the ‘Settings’ button to access
the set-up screens. To navigate
through the screens, just press the
‘Settings’ button each time until
you’ve gone through all the setting
screens.

[phone] [email protected]
www.dartsystems.co.uk
Dart Systems Ltd, Environment House, First Avenue, Westfield Industrial Estate,
Radstock, Somerset BA3 4BS
7
TELESCOPIC POLE CAMERA –USER GUIDE
Channel 2 Video Settings: Screen 3
Frame Rate: 5/15/30 fps selectable.
The higher the frame rate, the bigger
the file memory.
File Save: Set to ‘No’.
Time Settings: Screen 1
Navigate and change the settings as per
the above instructions.
Channel 1 Video Settings: Screen 2
Frame Rate: 5/15/30 fps selectable.
The higher the frame rate, the bigger
the file memory.
File Save: Set to ‘Yes’ to save to SD
Card.
Record Settings: Screen 4
Quality: High/Middle/Low selectable - the
higher the quality the bigger the file
memory.
Overwrite: Overwrite automatically once
SD Card memory is full.
Section: 5/15/30/60 minutes for each
record file.
REC Mode:
Manual: Start/Stop recording manually.
Imotion: Start recording by motion detection.
Auto: Start recording by DVR on power-up.

[phone] [email protected]
www.dartsystems.co.uk
Dart Systems Ltd, Environment House, First Avenue, Westfield Industrial Estate,
Radstock, Somerset BA3 4BS
8
TELESCOPIC POLE CAMERA –USER GUIDE
SD Card Settings: Screen 5
Navigate and change the settings as per
the above instructions.
Size: Displays SD Card capacity.
Remain Size: SD Card memory available.
Remain File Num: Approx number of
recorded files left on SD Card. Format:
Format SD Card on recording.
System Settings: Screen 6
Navigate and change the settings as per
the above instructions.
Language: Select language.
Alarm Period: Set the alarm time frame,
set by motion detection. Time Stamp: Set
time and date to appear on video and
images. Reset: Reset to default settings.
Version: Software version number.

[phone] [email protected]
www.dartsystems.co.uk
Dart Systems Ltd, Environment House, First Avenue, Westfield Industrial Estate,
Radstock, Somerset BA3 4BS
9
TELESCOPIC POLE CAMERA –USER GUIDE
USING THE DISPLAY
CONTROLS
The display controls are on the
right hand side of the Display
Handset and are as follows:
a. To change PICTURE settings
press Menu once then Sel to select
either Bright, Contrast, Colour or
Language. Use Up/Down key to
adjust level or language.
b. To flip screen image
Press Menu twice then Up/Down
to select picture orientation.
N.B SYSTEM and CLOCK menus
are not currently utilized.

[phone] [email protected]
www.dartsystems.co.uk
Dart Systems Ltd, Environment House, First Avenue, Westfield Industrial Estate,
Radstock, Somerset BA3 4BS
10
TELESCOPIC POLE CAMERA –USER GUIDE
USING THE DVR SETTINGS
– VIDEO/STILL IMAGE
CAPTURE
Channel Settings
Whist in ‘Preview’ mode, select the
recording channel the camera is
connected to by pressing either of
the ‘CH 1/2 SEL’ (Channel Select)
buttons.
Still Image Capture
Whilst in ‘Preview’ mode, to
capture a static image press the
‘Image’ capture button.
Still Image Viewing
Whilst in ‘Preview’ mode, to view
static image files, first access and
view the folder on the SD Card by
pressing the ‘Folder’ button.
Use the or to scroll up and
down if there is more than one
folder.
Press the ‘SEL’ (select) button to
select the folder and to view the
files within the folder.
Use the or to scroll up and
down through the files.
CH 1/2 SEL
CH 1/2SEL
REC
SEL

[phone] [email protected]
www.dartsystems.co.uk
Dart Systems Ltd, Environment House, First Avenue, Westfield Industrial Estate,
Radstock, Somerset BA3 4BS
11
TELESCOPIC POLE CAMERA –USER GUIDE
To delete files and folders press
the ‘Folder’ button twice.
Press the ‘SEL’ button to select the
file and to view the image.
Manual Record Video
Whilst in ‘Preview’ mode, to record
video press the ‘REC’ (record)
button.
To stop recording press the ‘STOP’
button.
Viewing Recorded Video
Whilst in ‘Preview’ mode, to view
record video files, first access and
view the folder on the SD Card by
pressing the ‘Folder’ button.
Use the or to scroll up and
down if there is more than one
folder.
Press the ‘SEL’ button to select the
file and to view the image.
Use the or to scroll up and
down through the files.
REC
SEL
REC
SEL
REC
SEL

[phone] [email protected]
www.dartsystems.co.uk
Dart Systems Ltd, Environment House, First Avenue, Westfield Industrial Estate,
Radstock, Somerset BA3 4BS
12
TELESCOPIC POLE CAMERA –USER GUIDE
To delete files and folders press
the ‘Folder’ button twice.
Press the ‘SEL’ button to select the
file and to view the video.
To play video press ‘PLAY’ button.
Use this button to also ‘PAUSE’
video.
To ‘FAST FORWARD’ or
‘REWIND’ use or .
CHARGING THE
BATTERIES
N.B. When charging the batteries
ensure that the AC adapter is
NOT plugged in, damage to the
equipment may occur.
The internal battery are charged by
the same charger supplied with the
system.
To Charge the Internal
Battery
The power switch on the DS100
monitor should be switched off, and
the charger 3 pin plug connected to
the socket on the underside of the
monitor. The charger can then be
plugged into a suitable mains outlet
and switched on. The charger will
display a Red LED until fully
charged then it will display Green.
To Charge the CMOS
Backup Battery
The CMOS backup battery is
constantly being charged whilst the
DS100 monitor is switched on. If
the monitor is in regular use then it
should hold its required charge.
However if the system (DS100
monitor) is unused for a long period
of time (6 months) there is a
possibility that when the unit is
switched on the time and date will
be inaccurate. This is due to the
backup battery losing charge.
To charge the battery the monitor
must be switched on for several
hours
The battery will be charged under
any of the following conditions:
1. The monitor is switched on and
plugged in to an AC adapter
REC
SEL
FOLDERS/PLAY/PAUSE/DEL

[phone] [email protected]
www.dartsystems.co.uk
Dart Systems Ltd, Environment House, First Avenue, Westfield Industrial Estate,
Radstock, Somerset BA3 4BS
13
TELESCOPIC POLE CAMERA –USER GUIDE
2. The monitor is switched on and
using the internal battery
3. The monitor is switched on and
charging the internal battery
The battery will not charge if the
monitor is not switched on.
To fully charge the backup battery
the DS100 monitor must be
switched on and left switched on for
a period of 24 hours. However to
get a substantial amount of charge
in to the backup battery, a period of
3-4 hours will suffice. With regular
monitor use, the charge will be
maintained.
POWERING THE SYSTEM
FROM AN AC ADAPTER
N.B When the AC adapter is
plugged in ensure that the
battery charger is NOT as
damage to the equipment may
occur.
The System can be powered from
an AC adapter in the event that the
battery is exhausted or if prolonged
surveillance is being carried out
from a stationary position.
A 12V AC adapter can be plugged
into the power jack on the back of
the Handset to supply power to the
system.
QUICK TIPS
If you see a “Stick Figure” symbol
in the bottom right corner of the
screen the unit has been switched
to Imotion and will start recording
when there is movement in front of
the camera lens. Refer to DVR
System Settings Screen 4 to
change.
If the recorder starts to record
automatically at system power on,
the recorder has been switched to
Auto. Refer to DVR System
Settings Screen 4 to change.
Blue Screen –If you encounter a
Blue screen and the LED on the
LCD Control panel is Red, the
screen has been switched into a
standby mode. To switch back
press the SEL button on the LCD
control panel once!
Time clock incorrect –If the time
is not correct when the unit is
switched on and unit has not been
used for a long period of time then
the CMOS backup battery has run
down. Reset the clock to the correct
time and fully charge cmos battery
as described on page 12.

[phone] [email protected]
www.dartsystems.co.uk
Dart Systems Ltd, Environment House, First Avenue, Westfield Industrial Estate,
Radstock, Somerset BA3 4BS
14
TELESCOPIC POLE CAMERA –USER GUIDE
SPECIFICATIONS
LCD
LCD size
5.0 inch(Diagonal)
Driver element
a-Si TFT active matrix
Resolution
640X(RGB)X480
Display mode
Normally White, Transmissive
Dot pitch
0.0529(W)X0.1587(H) mm
Active area
101.568(W)X76.176(H) mm
DVR
Frame rate
PAL 5/15/30 fps for each channel
Resolution
D1: 640x480
Compression Format
MPEG4 and Standard JPEG
Detect Mode
Motion Detection
Working Mode
Recording/Snapshot
Memory
SDHC card ≤128GB
SYSTEM
Power Supply (internal)
(external)
Battery Lithium 11.1V 4400maH
Battery Lithium 11.1V 4400maH or
12v ac adapter
Voltage
12V DC
Power Consumption (w/o IR)
≤530mA
Power Consumption (IR)
≤630mA
Operating Temperature
-10 to +55°C

[phone] [email protected]
www.dartsystems.co.uk
Dart Systems Ltd, Environment House, First Avenue, Westfield Industrial Estate,
Radstock, Somerset BA3 4BS
15
TELESCOPIC POLE CAMERA –USER GUIDE
NOTES:

[phone] [email protected]
www.dartsystems.co.uk
Dart Systems Ltd, Environment House, First Avenue, Westfield Industrial Estate,
Radstock, Somerset BA3 4BS
16
TELESCOPIC POLE CAMERA –USER GUIDE
NOTES:

[phone] [email protected]
www.dartsystems.co.uk
Dart Systems Ltd, Environment House, First Avenue, Westfield Industrial Estate,
Radstock, Somerset BA3 4BS
17
TELESCOPIC POLE CAMERA –USER GUIDE
NOTES:

[phone] [email protected]
www.dartsystems.co.uk
Dart Systems Ltd, Environment House, First Avenue, Westfield Industrial Estate,
Radstock, Somerset BA3 4BS
18
TELESCOPIC POLE CAMERA –USER GUIDE
NOTES: