Data Video RMC-300A User manual

UNIVERSAL REMOTE
RMC-300A
CONTROL PANEL
Instruction Manual

2
Contents
FCC COMPLIANCE STATEMENT..........................................................................................4
WARNINGS AND PRECAUTIONS........................................................................................4
WARRANTY ......................................................................................................................5
STANDARD WARRANTY.................................................................................................................5
THREE YEAR WARRANTY...............................................................................................................6
DISPOSAL .........................................................................................................................6
1. PRODUCT INTRODUCTION .........................................................................................7
1.1 FEATURES .......................................................................................................................7
1.2 SYSTEM DIAGRAM ............................................................................................................8
2. CONNECTIONS AND CONTROLS..................................................................................9
2.1 REAR PANEL ....................................................................................................................9
2.2 OPERATION PANEL .........................................................................................................11
Camera Control.................................................................................................................11
Switcher Control ...............................................................................................................15
Camera Preset / Switcher Multi-Functional Composite Keys.......................................16
Camera Selection Composite Keys 1/13 –12/24 .........................................................17
Keyboard Brightness Control ............................................................................................17
3. OSD MENU .............................................................................................................. 18
3.1 CAMERA .......................................................................................................................18
Camera Settings................................................................................................................19
Shutter ..........................................................................................................................19
Gain...............................................................................................................................19
Focus .............................................................................................................................19
Video Mode...................................................................................................................19
White Balance...............................................................................................................19
Video Setting.................................................................................................................20
Audio Setting.................................................................................................................21
Serial Port Settings............................................................................................................22
3.2 RMC-300A..................................................................................................................23
Manage Device .................................................................................................................23
System...............................................................................................................................25
Language.......................................................................................................................25
Information ...................................................................................................................25
Serial Port......................................................................................................................25
Network Setting ............................................................................................................26

3
Camera Tally..................................................................................................................27
Joystick Speed Mode.....................................................................................................28
Screen Saver..................................................................................................................28
4. DEVICE SETUP.......................................................................................................... 29
4.1 DVIP ...........................................................................................................................29
DHCP .................................................................................................................................31
Static IP .............................................................................................................................31
4.2 RS-422........................................................................................................................32
5. FIRMWARE UPDATE................................................................................................. 35
6. DIMENSIONS ........................................................................................................... 38
7. SPECIFICATIONS....................................................................................................... 39
SERVICE AND SUPPORT .................................................................................................. 40
Disclaimer of Product & Services
The information offered in this instruction manual is intended as a guide only. At all times,
Datavideo Technologies will try to give correct, complete and suitable information. However,
Datavideo Technologies cannot exclude that some information in this manual, from time to
time, may not be correct or may be incomplete. This manual may contain typing errors,
omissions or incorrect information. Datavideo Technologies always recommend that you
double check the information in this document for accuracy before making any purchase
decision or using the product. Datavideo Technologies is not responsible for any omissions
or errors, or for any subsequent loss or damage caused by using the information contained
within this manual. Further advice on the content of this manual or on the product can be
obtained by contacting your local Datavideo Office or dealer.

4
FCC Compliance Statement
This device complies with part 15 of the FCC rules. Operation is subject to the following two
conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may
cause undesired operation.
Warnings and Precautions
1. Read all of these warnings and save them for later reference.
2. Follow all warnings and instructions marked on this unit.
3. Unplug this unit from the wall outlet before cleaning. Do not use liquid or aerosol
cleaners. Use a damp cloth for cleaning.
4. Do not use this unit in or near water.
5. Do not place this unit on an unstable cart, stand, or table. The unit may fall, causing
serious damage.
6. Slots and openings on the cabinet top, back, and bottom are provided for ventilation. To
ensure safe and reliable operation of this unit, and to protect it from overheating, do not
block or cover these openings. Do not place this unit on a bed, sofa, rug, or similar
surface, as the ventilation openings on the bottom of the cabinet will be blocked. This
unit should never be placed near or over a heat register or radiator. This unit should not
be placed in a built-in installation unless proper ventilation is provided.
7. This product should only be operated from the type of power source indicated on the
marking label of the AC adapter. If you are not sure of the type of power available,
consult your Datavideo dealer or your local power company.
8. Do not allow anything to rest on the power cord. Do not locate this unit where the
power cord will be walked on, rolled over, or otherwise stressed.
9. If an extension cord must be used with this unit, make sure that the total of the ampere
ratings on the products plugged into the extension cord do not exceed the extension
cord rating.
10. Make sure that the total amperes of all the units that are plugged into a single wall
outlet do not exceed 15 amperes.
11. Never push objects of any kind into this unit through the cabinet ventilation slots, as
they may touch dangerous voltage points or short out parts that could result in risk of
fire or electric shock. Never spill liquid of any kind onto or into this unit.

5
12. Except as specifically explained elsewhere in this manual, do not attempt to service this
product yourself. Opening or removing covers that are marked “Do Not Remove” may
expose you to dangerous voltage points or other risks, and will void your warranty. Refer
all service issues to qualified service personnel.
13. Unplug this product from the wall outlet and refer to qualified service personnel under
the following conditions:
a. When the power cord is damaged or frayed;
b. When liquid has spilled into the unit;
c. When the product has been exposed to rain or water;
d. When the product does not operate normally under normal operating conditions.
Adjust only those controls that are covered by the operating instructions in this
manual; improper adjustment of other controls may result in damage to the unit and
may often require extensive work by a qualified technician to restore the unit to
normal operation;
e. When the product has been dropped or the cabinet has been damaged;
f. When the product exhibits a distinct change in performance, indicating a need for
service.
Warranty
Standard Warranty
Datavideo equipment is guaranteed against any manufacturing defects for one year
from the date of purchase.
The original purchase invoice or other documentary evidence should be supplied at the
time of any request for repair under warranty.
The product warranty period beings on the purchase date. If the purchase date is
unknown, the product warranty period begins on the thirtieth day after shipment from a
Datavideo office.
All non-Datavideo manufactured products (product without Datavideo logo) have only
one year warranty from the date of purchase.
Damage caused by accident, misuse, unauthorized repairs, sand, grit or water is not
covered under warranty.
Viruses and malware infections on the computer systems are not covered under
warranty.
Any errors that are caused by unauthorized third-party software installations, which are
not required by our computer systems, are not covered under warranty.
All mail or transportation costs including insurance are at the expense of the owner.
All other claims of any nature are not covered.

6
All accessories including headphones, cables, batteries, metal parts, housing, cable reel
and consumable parts are not covered under warranty.
Warranty only valid in the country or region of purchase.
Your statutory rights are not affected.
Three Year Warranty
All Datavideo products purchased after July 1st, 2017 qualify for a free
two years extension to the standard warranty, providing the product is
registered with Datavideo within 30 days of purchase.
Certain parts with limited lifetime expectancy such as LCD panels, DVD drives, Hard
Drive, Solid State Drive, SD Card, USB Thumb Drive, Lighting, Non-PCIe Card and third
party provided PC components are covered for 1 year.
The three-year warranty must be registered on Datavideo's official website or with your
local Datavideo office or one of its authorized distributors within 30 days of purchase.
Disposal
For EU Customers only - WEEE Marking
This symbol on the product or on its packaging indicates that this product
must not be disposed of with your other household waste. Instead, it is
your responsibility to dispose of your waste equipment by handing it
over to a designated collection point for the recycling of waste electrical
and electronic equipment. The separate collection and recycling of your
waste equipment at the time of disposal will help to conserve natural resources and ensure
that it is recycled in a manner that protects human health and the environment. For more
information about where you can drop off your waste equipment for recycling, please
contact your local city office, your household waste disposal service or the shop where you
purchased the product.
CE Marking is the symbol as shown on the left of this page. The letters
"CE" are the abbreviation of French phrase "Conformité Européene"
which literally means "European Conformity". The term initially used was
"EC Mark" and it was officially replaced by "CE Marking" in the Directive
93/68/EEC in 1993. "CE Marking" is now used in all EU official documents.

7
1. Product Introduction
Datavideo RMC-300A is a multi-functional Multi-Camera Controller capable of controlling up
to 24 PTZ and block cameras via DVIP or 8 PTZ and block cameras via RS-422. With DVIP and
the RS-422 interface, the RMC-300A allows you to configure and control all Datavideo
cameras, PTR-10T Robotic Head, SE-3200 Switcher and HDR-80/90 ProRes Recorder.
The RMC-300A includes a built-in 5 inch LCD screen designed for intuitive device
configuration.
The controller is affordable, easy to set up, hassle free and perfect for electronic field
production.
1.1 Features
Remote Control via RS-422 or DVIP port
Able to control up to 24 Datavideo PTZ/block cameras with 7 presets for each
camera
RGB keyboard for easy identification of keyboard functions
User friendly UI on 5” touch screen for easy camera setup
Zoom knob and pan/tilt joystick for adjusting the zoom ratio and lens position
Easy to use and high precision
Control camera, switcher and recorder from a remote location
Firmware upgrade via USB 2.0 port

8
1.2 System Diagram

9
2. Connections and Controls
In this chapter, we will first describe the rear panel ports for establishing connections with
external devices. In the second section, we will discuss panel operations.
2.1 Rear Panel
DVIP Control
The DVIP port connects the camera controller directly to the
PC or a network router via any RJ-45 cables, allowing the
controller to control up to 24 cameras. See DVIP for more
details.
USB 2.0 Firmware Upgrade Port
Connect the USB storage device to the USB firmware
upgrade port for firmware upgrade. See Firmware Update
for instructions.

10
Tally IN Port
The D-sub 15 pin female Tally IN port receives tally signals
from the connected switcher’s tally out. Red indicates On-
Air, and Green indicates next camera source.
The following table shows the pinout of the tally in jack.
Pin
Function
1
Program Channel 1
2
Program Channel 5
3
Preview Channel 1
4
GND
5
Program Channel 4
6
Program Channel 2
7
Program Channel 6
8
Preview Channel 2
9
GND
10
Preview Channel 5
11
Program Channel 3
12
Preview Channel 6
13
Preview Channel 3
14
GND
15
Preview Channel 4
Power Switch
Power switch ON/OFF
DC IN
DC in socket connects the supplied 12V PSU. The connection
can be secured by screwing the outer fastening ring of the
DC In plug to the socket.
8 Serial Communication Ports
On rear panel of the RMC-300A, there are 8 RJ-45 communication ports designed for
establishing direction connection with PTZ cameras. The communication protocol used here
is RS-422, allowing you to connect the controller to RS-422 ports of PTZ cameras (example:
PTC-150) using any RJ-45 cables. See RS-422 section for setup details.
Note: Before establishing connections with cameras, first make sure that they are already
set to RS-422 connection mode.