Data Video SE-700 User manual

1

2
Table of Contents
Warnings and Precautions............................................................................................................................. 5
Warranty ........................................................................................................................................................ 6
Standard Warranty..................................................................................................................................... 6
Two Year Warranty .................................................................................................................................... 6
Disposal .......................................................................................................................................................... 6
Chapter 1 Introduction................................................................................................................................. 7
1.1 Features........................................................................................................................................... 7
1.2 System Diagram............................................................................................................................... 8
Chapter 2 Connections and Controls ........................................................................................................... 9
2.1 Rear Panel ....................................................................................................................................... 9
2.2 Control Panel................................................................................................................................. 10
Chapter 3 Input / Output............................................................................................................................ 15
3.1 Setting the Video Outputs............................................................................................................. 15
3.2 Setting the Video Input Standard.................................................................................................. 15
3.3 GPI Connections ............................................................................................................................ 16
3.4 Tally Outputs ................................................................................................................................. 16
Chapter 4 SE-700 Video.............................................................................................................................. 17
4.1 Multi View ..................................................................................................................................... 17
4.2 SE-700 Video Layers ...................................................................................................................... 18
Chapter 5 Transition Effects ....................................................................................................................... 19
5.1 CUTTING between Sources ........................................................................................................... 19
5.2 Mixing between Sources............................................................................................................... 19
5.3 Wiping between Sources............................................................................................................... 20
Chapter 6 Menu Options............................................................................................................................ 21
Chapter 7 OSD MENU Functions ................................................................................................................ 27
7.1 Start Menu..................................................................................................................................... 27
7.1.1 Transition ............................................................................................................................... 27
7.1.2 Wipe Effects ........................................................................................................................... 28
7.1.3 Border .................................................................................................................................... 28
7.1.4 Position .................................................................................................................................. 28
7.1.5 Matte...................................................................................................................................... 28
7.2 Keyer.............................................................................................................................................. 29
7.2.1 Keyer ...................................................................................................................................... 29

3
7.2.2 Keyer Control ......................................................................................................................... 29
7.2.3 Key Source.............................................................................................................................. 29
7.2.4 Fill Source............................................................................................................................... 30
7.2.5 Chroma................................................................................................................................... 30
7.2.6 Mask....................................................................................................................................... 30
7.3 P-In-P ............................................................................................................................................. 31
7.3.1 P-In-P Keyer............................................................................................................................ 31
7.3.2 Position .................................................................................................................................. 31
7.3.3 Border .................................................................................................................................... 31
7.3.4 Border Width ......................................................................................................................... 32
7.3.5 Crop........................................................................................................................................ 32
7.4 P-in-P Keyer ................................................................................................................................... 33
7.4.1 P-In-P Source.......................................................................................................................... 33
7.4.2 Keyer ...................................................................................................................................... 33
7.4.3 Keyer Control ......................................................................................................................... 33
7.4.4 Chroma................................................................................................................................... 34
7.4.5 Mask .......................................................................................................................................... 34
7.5 Downstream Key ........................................................................................................................... 35
7.5.1 DSK ......................................................................................................................................... 35
7.5.2 Keyer Control ......................................................................................................................... 35
7.5.3 Key Source.............................................................................................................................. 35
7.5.4 Fill Source ............................................................................................................................... 36
7.5.5 Mask....................................................................................................................................... 36
7.6 Stills ............................................................................................................................................... 37
7.6.1 Load Still................................................................................................................................. 37
7.6.2 Save Still ................................................................................................................................. 37
7.6.3 Freeze..................................................................................................................................... 38
7.7 User Mems .................................................................................................................................... 39
7.7.1 Load Memory......................................................................................................................... 39
7.7.2 Save Memory ......................................................................................................................... 39
7.8 Inputs............................................................................................................................................. 40
7.8.1 Input 1-4................................................................................................................................. 40
7.8.2 Freeze..................................................................................................................................... 40
7.8.3 Crosspoint .............................................................................................................................. 40

4
7.9 Outputs.......................................................................................................................................... 41
7.9.1 Outputs .................................................................................................................................. 41
7.9.2 Audio...................................................................................................................................... 42
7.9.3 GPI Out................................................................................................................................... 42
7.9.4 Multiviewer............................................................................................................................ 42
7.10 Setup ............................................................................................................................................. 43
7.10.1 Menu Preference .................................................................................................................. 43
7.10.2 Standard................................................................................................................................ 44
7.10.3 Menu Mode ........................................................................................................................... 44
7.10.4 Auto Save ............................................................................................................................... 44
7.10.5 Factory Default....................................................................................................................... 44
7.10.6 Reset Names .......................................................................................................................... 44
7.10.7 Language ................................................................................................................................ 44
7.10.8 Software................................................................................................................................. 44
Chapter 8 Applications ............................................................................................................................... 45
8.1 Chromakeyer ................................................................................................................................. 45
8.2 DSK and PiP.................................................................................................................................... 45
Chapter 9 Appendices ................................................................................................................................ 48
Appendix 1: Firmware Upgrade ............................................................................................................... 48
Appendix 2: Frequently-Asked Questions................................................................................................ 49
Appendix 3: Dimensions & Weight .......................................................................................................... 52
Appendix 4: Specifications ....................................................................................................................... 53
Service and Support..................................................................................................................................... 55
Disclaimer of Product and Services
The information offered in this instruction manual is intended as a guide only. At all times, Datavideo Technologies will try to
give correct, complete and suitable information. However, Datavideo Technologies cannot exclude that some information in
this manual, from time to time, may not be correct or may be incomplete. This manual may contain typing errors, omissions
or incorrect information. Datavideo Technologies always recommend that you double check the information in this document
for accuracy before making any purchase decision or using the product. Datavideo Technologies is not responsible for any
omissions or errors, or for any subsequent loss or damage caused by using the information contained within this manual.
Further advice on the content of this manual or on the product can be obtained by contacting your local Datavideo Office or
dealer.

5
Warnings and Precautions
1. Read all of these warnings and save them for later reference.
2. Follow all warnings and instructions marked on this unit.
3. Unplug this unit from the wall outlet before cleaning. Do not use liquid or aerosol cleaners. Use a
damp cloth for cleaning.
4. Do not use this unit in or near water.
5. Do not place this unit on an unstable cart, stand, or table. The unit may fall, causing serious damage.
6. Slots and openings on the cabinet top, back, and bottom are provided for ventilation. To ensure safe
and reliable operation of this unit, and to protect it from overheating, do not block or cover these
openings. Do not place this unit on a bed, sofa, rug, or similar surface, as the ventilation openings on
the bottom of the cabinet will be blocked. This unit should never be placed near or over a heat
register or radiator. This unit should not be placed in a built-in installation unless proper ventilation is
provided.
7. This product should only be operated from the type of power source indicated on the marking label
of the AC adapter. If you are not sure of the type of power available, consult your Datavideo dealer
or your local power company.
8. Do not allow anything to rest on the power cord. Do not locate this unit where the power cord will be
walked on, rolled over, or otherwise stressed.
9. If an extension cord must be used with this unit, make sure that the total of the ampere ratings on
the products plugged into the extension cord do not exceed the extension cord rating.
10. Make sure that the total amperes of all the units that are plugged into a single wall outlet do not
exceed 15 amperes.
11. Never push objects of any kind into this unit through the cabinet ventilation slots, as they may touch
dangerous voltage points or short out parts that could result in risk of fire or electric shock. Never
spill liquid of any kind onto or into this unit.
12. Except as specifically explained elsewhere in this manual, do not attempt to service this product
yourself. Opening or removing covers that are marked “Do Not Remove” may expose you to
dangerous voltage points or other risks, and will void your warranty. Refer all service issues to
qualified service personnel.
13. Unplug this product from the wall outlet and refer to qualified service personnel under the following
conditions:
a. When the power cord is damaged or frayed;
b. When liquid has spilled into the unit;
c. When the product has been exposed to rain or water;
d. When the product does not operate normally under normal operating conditions. Adjust only
those controls that are covered by the operating instructions in this manual; improper
adjustment of other controls may result in damage to the unit and may often require extensive
work by a qualified technician to restore the unit to normal operation;
e. When the product has been dropped or the cabinet has been damaged;
f. When the product exhibits a distinct change in performance, indicating a need for service.

6
Warranty
Standard Warranty
•
Datavideo equipment is guaranteed against any manufacturing defects for one year from the date
of purchase.
•
The original purchase invoice or other documentary evidence should be supplied at the time of any
request for repair under warranty.
•
Damage caused by accident, misuse, unauthorized repairs, sand, grit or water is not covered by this
warranty.
•
All mail or transportation costs including insurance are at the expense of the owner.
•
All other claims of any nature are not covered.
•
Cables & batteries are not covered under warranty.
•
Warranty only valid within the country or region of purchase.
•
Your statutory rights are not affected.
Two Year Warranty
•
All Datavideo products purchased after 01-Oct.-2008 qualify for a free one year extension to the
standard Warranty, providing the product is registered with Datavideo within 30 days of purchase.
For information on how to register please visit www.datavideo.com or contact your local Datavideo
office or authorized Distributors
•
Certain parts with limited lifetime expectancy such as LCD Panels, DVD Drives, Hard Drives are only
covered for the first 10,000 hours, or 1 year (whichever comes first).
Any second year warranty claims must be made to your local Datavideo office or one of its authorized
Distributors before the extended warranty expires.
Disposal
For EU Customers only - WEEE Marking
This symbol on the product indicates that it will not be treated as household waste.
It must be handed over to the applicable take back scheme for the recycling of
Waste Electrical and Electronic Equipment. For more detailed information about the
recycling of this product, please contact your local Datavideo office.

7
Chapter 1 Introduction
The Datavideo SE-700 is a small, cost-effective, HD digital video switcher with easy-to-use professional
features.
The SE-700 switcher offers two HD SDI and two HDMI inputs. Supported video formats include 1080i/50,
1080i/59.94, 1080i/60, 720p/50, 720p/59.94 and 720p/60. Output options include; two user assignable
HD SDI and one HDMI output. These three user defined output options can be set up to provide Clean
Preview, Clean Program, Program with DSK overlay, Preview Out or Multi-view as well as Freeze, Still or
Inputs 1~4. The SDI or HDMI outputs can be taken to other Datavideo products (separate purchase) such
as the HRS-30 HD field recorder, TLM-170G HD monitor and can also be streamed to web based viewers
using the Datavideo NVS-25 Video Streaming Server.
The SE-700 also features two analogue balanced XLR audio inputs for connecting an external audio mixer
such as the Datavideo AM-100 or AD-200. Tally and RJ-45 connections allow the switcher to be
connected to a Windows PC as well as providing tally light indications to crew and on screen talent via
Datavideo’s ITC-100 talkback system.
The SE-700 is also capable of HD Chroma Key, Luma Key, Down Stream Key, Picture-In-Picture, up to 32
Wipe transitions and three user defined still frame stores it really is a small, powerful, HD video switcher!
1.1 Features
•4 Video Inputs ( SDI x 2 + HDMI x 2)
-Frame Sync on each input
•Flexible Mix/Effects Processor with
-1 Upstream Keyer supporting Chroma Key & Linear/Luma Key
-1 Upstream Picture-In-Picture supporting Chroma Key & Luma Key Modes as well as unkeyed
mode
-Wipe Generator
o32 wipe patterns including circle and heart
oBorder & Softness Controls
-Wipe, Mix & Cut Transitions
-1 DSK
-Full M/E Preview Function
•Frame Store
-Dedicated Stills Buffer
-More than 1000 images can be stored internally
•Assignable Outputs
-Each SDI Output can be switched in the Menu as:
oProgram (w/DSK)
oClean Program/Preview (w/o DSK)
oMultiscreen
oInput 1-4
•XPT (Cross Point Assignment)
•Easy-to-use On-Screen Menu System for quick setting of parameters
•PC & Tablet control also available
•Tally Output
•GPI Output

8
1.2 System Diagram
PA

9
Chapter 2 Connections and Controls
2.1 Rear Panel
Video Input Modules
The SE-700 provides four video input channels.
There are two SDI inputs (BNC connectors) and two
HDMI inputs.
Video Output Modules
The SE-700 provides three video output channels.
There are two SDI outputs (BNC connectors) and
one HDMI Output.
Audio Input
Two channels of XLR Balanced Audio Input.
GPI
GPI output connection for basic control of other
externally-connected devices.
Ethernet Port
This port allows IP connection of the SE-700 to a PC
for Firmware Update & Control.
TALLY Output
Sends Red, and Green tally signals to each channel.
Red indicates On-Air, and Green indicates next
camera source.
DC IN
DC in socket connects the supplied 12V / 19W PSU.
The connection can be secured by screwing the
outer fastening ring of the DC In plug to the socket.

10
Grounding Terminal
When connecting this unit to any other component,
make sure that it is properly grounded by
connecting this terminal to an appropriate point.
When connecting, use the socket and be sure to use
wire with a cross-sectional area of at least 1.0
mm
2
.
2.2 Control Panel
1
Function Keys F1 – F3
11
DSK Selection / PGM & PVW Settings
2
User Memory
12
FTB – Fade to Black
3
Menu Control
13
Speed Selection
4
Wipe Transition Selection
14
WIPE Transition Effect
5
Wipe Border Setting
15
Take - Cut & Auto
6
Live Video Screen Capture
16
MIX Transition Effect
7
Still Frame Stores FS1, FS2, FS3
17
Transition on PVW Only
8
Background Transition Enabler
18
T-Bar for manual transitions
9
PIP Selection / PGM & PVW Settings
19
Program source row
10
Keyer Selection / PGM & PVW Settings
20
Preview source row
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20

11
Function Keys F1-
F3
F1: Switch USER 1-6 buttons to act as USER 7-12
buttons
F2: User Mem Save
Press and hold for 2 seconds
All user buttons will flash (Blue LED)
Press a user button to save the current setting
(To turn off flashing LED without saving, press F2
again)
F3: Reset Button
Mode 1 - When in Menu Select mode (left hand
column of the OSD menu), pressing the 'Reset'
button will reset all current menu items to their
factory defaults.
Mode 2 - When in a Sub-Menu, pressing the 'Reset'
button will reset the current menu line only.
User Memory 1-6
User Memory buttons 1-6 allow the user to
quickly recall and load previously saved switcher
settings with a single button press. This includes
PIP, Keyer and DSK settings. F1 button changes
these keys to User memories 7 to 12. The
switcher loads settings saved to User Memory 0
as default settings used at boot up. See the User
Memory section for more information.
Menu Control
Menu Operation
Press the MENU button to gain access to the
menu; use the up/down/left/right arrow buttons
to browse through the menu and press ENTER
button to select an option or MENU button to
exit.
Wipe Transition
Selection
WIPE Transition Selection
Each Wipe button consists of black and white
colors. The white represents the current Program
image and the black represents the WIPE-IN
image. There are a total of 32 WIPE presets
offered on the SE-700; the WIPE buttons allow
the user to make a selection directly from the
control panel for the first 12 and remaining 20
WIPE effects are selectable from the menu.

12
Rev Button
Pressing this button reverses the direction of the
WIPE.
BDR ON/OFF
Turns the WIPE border function ON/OFF
BDR SOFT
Adjustment of the WIPE border softness
To fine tune the border softness, please use the
OSD menu option “START > WIPE EFFECTS >
SOFT ”
BDR COLOR
Selection of the WIPE border color
BDR SIZE
Selection of the WIPE border thickness
GRAB
The GRAB feature allows the user to grab and
save the current Program video image to the
Freeze channel of Preset and Program rows.
Please refer to the Stills section for the process
after pressing the button.
FS1 – FS3
Pre-loaded still images can be assigned to the
frame store buttons FS1, FS2 and FS3. Pressing
an FS button loads the this stored image to the
STILL channel of Program and Preset rows.
TRANS BG
Enables Background Transition between
Program / Preview

13
PIP Selection /
PGM & PVW
Settings
PIP PGM: Shows the configured PIP on multiview
and PGM outputs.
PIP PVW: Shows the configured PIP on PVW and
multiview outputs. Holding down this button also
allows selection of the PIP source
from the
Preview Source row. The selected source button
will flash.
PIP SETUP: Press PIP SETUP button to open the
PIP configuration menu.
Keyer Selection /
PGM & PVW
Settings
KEYER PGM: Enables the key (Chroma / Luma /
Linear) on multiview and PGM output
KEYER PVW: Enables Keyer on
PVW and
multiview outputs. Press and hold this button to
select Keyer KEY source from the Preview Source
row. The selected source button will flash.
KEYER SETUP: Press this button to open Keyer
configuration menu on multiview output (Chroma
/ Luma / Linear). Press and hold this button to
select Keyer FILL source from the Preview Source
row.
DSK Selection /
PGM & PVW
Settings
DSK PGM: Enables the DSK on multiview and
PGM outputs.
DSK PVW: Shows the DSK on PVW and multiview
outputs. Press and hold this button to select DSK
Key source from the Preview Source row. The
selected source button will flash.
DSK SETUP: Press this button to open DSK
configuration menu. Press and hold this button to
select DSK FILL source from the Preview Source
row.
FTB
Selection of the Fade to Black transition effect

14
Speed Selection
Transition Speed Selection buttons (1, 2 and 3)
Button 1= 12 frame duration, 2= 25 and 3= 50 at
1080i50
Button 1= 15 frame duration, 2= 30 and 3= 60 at
1080i60
For a user defined transition duration see the
section on Mixing between sources.
WIPE Function
Selection of the WIPE transition effect
TAKE - Cut & Auto
Cut: Immediate manual switch between selected
sources
Auto: Auto transition according to the speed
selected
MIX Function
Mix transition effect
PVW TRANS
Transition shown on PVW only
BLK
Black Background
STILL
Select STILL picture (FS1, 2, 3 select the Still
Image)
FREEZE
Select FREEZE picture
BKG
Background Button (Full screen color Matte or
Bars)

15
Chapter 3 Input / Output
3.1 Setting the Video Outputs
Video Output Connections
The SE-700 provides three video output channels.
There are two SDI outputs (BNC connectors) a
nd one HDMI
Output.
These video outputs are initially set as follows when shipped from the factory.
SDI 1 Factory default – Program out with DSK
SDI 2 Factory default – Program out with DSK
HDMI Factory default – Multi view output (video sources as well as Preview and Program)
Each of these outputs can be reconfigured to one of the settings below by using the menu path Setup >
Outputs
Freeze
Still
Input 4
Input 3
Input 2
Input 1
Clean PVW [Preview]
Clean PGM [Program]
PVW out including DSK
PGM out including DSK
Multi view
Note: Ensure at least one output is left set as Multi View so the Main Menu can still be accessed.
Note: The SE-700 HDMI multi view output only operates at the 1080P or 720P standards. This can be
useful for some HDMI and DVI monitor types. If an interlaced 1080i Multi view output is needed please
configure an SDI output for multi view instead.
3.2 Setting the Video Input Standard
The SE-700 is initially set up for the 1920 x 1080 i50 or i60 video standard when shipped from the factory
depending on your country’s video standard.
As with most HD video switchers, the SE-700 will expect all video inputs to be operating in the same
video standard as the switcher itself. If a connected device is supplying a different video format/standard
then the switcher may not display the video for that input. Change the source equipment settings to
match the switcher’s video standard or vice versa.
The SE-700 can support the following HD video standards:
1920x 1080i/50, 1080i/59.94, 1080i/60
and
1280x 720p/50, 720p/59.94, 720p/60
The switcher’s video standard can be reconfigured by using the menu path SETUP > STANDARD

16
3.3 GPI Connections
The SE-700 can control external recorder/playback devices via simple contact closure GPI switch.
The GPI interface is a 3.5mm Jack Socket which is situated on the rear panel of the SE-700. Contact
closure between the Outer and Inner contacts on the jack plug will trigger a user selected event. Power is
supplied by the SE-700 and is less than 5V DC.
This GPI socket can also be used as a socket to trigger record or playback events with other equipment
such as the Datavideo HDR-70 recorder.
SAFETY FIRST The cabling required needs to be designed specifically to connect the SE-700 to the
chosen record or playback device as they are not all the same. The cabling required can be made
by yourself or a competent technician. Please speak with your Dealer or local Datavideo office to get
further help and advice.
3.4 Tally Outputs
The SE-700 has a D-sub 15 pin female tally output port. These connections provide bi-colour tally
information to a number of other Datavideo products, such as the ITC-100 eight channel talkback system
and the TLM range of LCD Monitors. The ports are open collector ports and as such do not provide
power to tally light circuits.
The pin outputs are defined as follows:
PIN No.
Signal Name
Input/Output
Description of Signal
1
Program 1
Open collector output
Tally output of input video Program 1
2
--
--
No Function
3
Preview 1
Open collector output
Tally output of input video Preview 1
4
RCOM (GND)
Ground
Ground
5
Program 4
Open collector output
Tally output of input video Program 4
6
Program 2
Open collector output
Tally output of input video Program 2
7
--
--
No Function
8
Preview 2
Open collector output
Tally output of input video Preview 2
9
GND
Ground
Ground
10
--
--
No Function
11
Program 3
Open collector output
Tally output of input video Program 3
12
--
--
No Function
13
Preview 3
Open collector output
Tally output of input video Preview 3
14
YCOM (GND)
Ground
Ground
15
Preview 4
Open collector output
Tally output of input video Preview 4

17
Chapter 4 SE-700 Video
4.1 Multi View
The SE-700 Multi view output can be supplied from the HDMI or SDI outputs, see Chapter 3. The layout
of the multi view cannot be changed. The sources can be swapped around using the cross point section
of the Inputs menu.
The Multi view shows monitoring images for Preview (PVW), Program (PGM), Inputs 1~4, Still and Freeze
channels as well as SDI outputs 1 and 2.
The Multi view can also show audio level bars overlaid on the Program image. This confirms the
analogue XLR audio input is being received and embedded to the selected Program output(s).
A Red tally indication box is shown around the selected Program source. This video image is also seen at
the switchers selected Program output(s). A Green tally indication box is shown around the selected
Preview source. This will be the image source to be mixed to, wiped in or cut to next depending on the
user’s preference.
STILL image is an image pre-loaded from one of the SE-700’s frame stores (FS1, FS2 or FS3). See the
Frame Stores section for more information.
FREEZE image is a frozen image taken immediately from one of the SE-700’s four live input channels or
alternatively from one of the possible 1000 pre-loaded memory points.
Images SDI out 1 and SDI out 2 confirm what is being sent from those SDI outputs. These outputs can be
configured differently by the user, see Chapter 3. Please refer to the section on outputs menu for more
details.

18
4.2 SE-700 Video Layers
The SE-700 is a High Definition Digital Video Switcher for mixing video sources and embedding analogue
audio. It has additional functions such as Picture in Picture (PIP), Chroma / Luma Key and Down Stream
Key (DSK).
Before attempting to use the SE-700’s PIP, Chroma, Luma and Down Stream Keying functions it may
help to first understand the order of the video layers at the SE-700 Program outputs.
The background video layer is used for transitioning between Preview and Program sources. This layer
also includes any selected wipe transitions. This layer can be hidden or hidden in part by the PiP, Keyer
or DSK video layers in front of it.
The Picture in Picture (PiP) layer is used for displaying a smaller secondary image in front of the
background video layer. This smaller PiP image can be resized, cropped and repositioned by the user to
avoid an important part of the background layer being covered by it.
The Keyer layer is used for Chroma Key or Luma Key applications. The KEY video signal (foreground) is
shown in this layer and the FILL video signal is displayed in the background video layer. If set up
incorrectly, this layer can stop the video layers behind it being displayed properly.
The Down Stream Key (DSK) layer is placed on top of all the previous layers. This layer is typically used
with Character Generator inputs for displaying titles, lower thirds, clocks and logos. Datavideo offer
several Character Generator Products (additional purchase) such as CG-250, CG-350 and CG-500.
NB: Where possible prepare and position the upper video layers in advance of the live production
starting to avoid them appearing on the program output incorrectly.
Most broadcast networks have guidelines and advice on the use of video, images, music, logos and on
screen text so it is best to check beforehand when planning a production. Do not use copyright protected
content until you have the relevant permissions. Information on royalty free video, images and music is
widely available. Please speak with your local dealer or seek professional advice.

19
Chapter 5 Transition Effects
The SE-700 allows the user several options for cutting or transitioning between the selected preview and
program video sources.
5.1 CUTTING between Sources
Cutting between sources is an instant switch from the current Program video to the selected Preview
source image. This can be achieved in two ways:
1. Each button press on the Program row will cause an instant clean cut to the selected source.
2. Select the next source on the Preset row of buttons and then press the CUT button.
5.2 Mixing between Sources
In order to mix between two video sources, first ensure the Transition Background or TRANS BG button
is ON.
TRANS BG
Enables Background Transition between Program / Preset
Pressing MIX will select a mix transition to use when moving from the current video source on the
Program row to the selected next source on the Preset row.
Mix transition effect
The timing of this MIX transition can be manually decided when moving the T-Bar or completed over a
set time when using the AUTO button.
To change the rate of transition for the AUTO button, follow the menu path START> Transition and
change the M/E duration value in frames. If this value is small then the transition will happen quickly. If
this value is larger, then the transition will take longer to complete.
The default settings for speed buttons 1, 2 and 3 are:
•Button 1= 12 frame duration, 2= 25 and 3= 50 at 1080 i50
•Button 1= 15 frame duration, 2= 30 and 3= 60 at 1080 i60

20
5.3 Wiping between Sources
In order to WIPE between two video sources, first ensure the transition background or TRANS BG button
is ON.
TRANS BG Enables background transition between Program / Preset
Pressing WIPE will use the current wipe transition selected when moving from the program video source
to the selected next source on the preset row.
WIPE transition effect
The timing of this MIX transition can be manually decided when moving the T-Bar or completed over a
set time when using the AUTO button.
To change the rate of transition for the AUTO button, follow the menu path START> TRANSITION and
change the M/E duration value in frames. If this value is small, then the wipe transition will happen
quickly. If this value is larger, then the wipe will take longer to complete.
Wipe Transition
Selection
WIPE Transition Selection
Each Wipe button consists of black and white colors. The white
represents the current Program image and the black represents
the WIPE-IN image. There are a total of 32 WIPE presets offered
by the SE-700; the WIPE buttons allow the user to make a
selection directly from the control panel for the first 12 and
remaining 20 WIPE effects are selectable from the menu path
START > WIPE > WIPE VALUE
WIPE Reversal
Pressing “REV”button reverses the direction of the WIPE.
BDR ON/OFF
Turns the WIPE border function ON/OFF
BDR SOFT
Adjustment of the border softness
To fine tune the border softness, please use the menu path
START > WIPE > SOFT
BDR COLOR
Select the border color by pressing this button
To fine tune the border color, please use the menu path
START > BORDER > to change HUE, LUMA and SAT values
BDR SIZE
Selection of the border width