Data Video SE-2000R User manual

HD Digital Video Switcher
SE-2000R
Quick Start Guide
www.datavideo-tek.com

1
Table of Contents
What’s in the box?......................................................................................................................2
Introduction ................................................................................................................................2
Product Overview.......................................................................................................................2
Features.....................................................................................................................................2
Front Panel...........................................................................................................................3
Rear Panel ...........................................................................................................................6
System Configuration.................................................................................................................8
Configuration Utility Service .....................................................................................................19
1. Device Setup..................................................................................................................19
2. LOGOS Setup................................................................................................................20
3. Clock Font......................................................................................................................21
4. Background....................................................................................................................22
5. Names............................................................................................................................23
Dimension................................................................................................................................24
Specification.............................................................................................................................25
Service & Support ....................................................................................................................26

2
What’s in the box?
1 x XLR 4P-F to DC Jack CAD-02
1 x Switching AD DC12V/1.5A
1 x SE-2000R Instruction Manual
Introduction
Thank you for purchasing SAE-2000R Digital Video Switcher. We hope you will be pleased with your purchase,
and with what you can achieve with this advanced piece of technology. In order to get the most out of your new
switcher, we recommend that you spend some time getting familiar with this manual, as it will describe in detail all
the functions of this unit. In addition, you’ll find some useful background information on video.
Product Overview
The SE-2000R is an HD input, digital processing live video switcher. The SE-2000R includes 6 groups of video
inputs (4x BNC connector for HD -SDI & 2 x DVI), and 4 x video outputs PGM (2x HD-SDI output, 1x HD-YUV
output, and, PVW (1x DVI-D output), PVW output include 6x monitoring screen and 1x PVW screen and 1x PGM
screen. These allow easy monitoring of inputs and/or outputs. A built in frame synchroniser ensures glitch free
switching of non synchronised inputs. Additional sockets include, Tally light output, RS-232 interface for firmware
update.
Features
FULL HD:
Input: 4x HD-SDI and 1x DVI-D input or 3x HD-SDI, and 2x DVI-D input (Options)
Output: PGM: Full HD output, HD-SDI and HD-YUV format
PVW: DVI-D
PVW out with multi image and digital clock display
DVI-D for power point presentation, simple title, support full HD input.
LOGO insertion, up to 14 logos pre-store and LOGO’s size is 256x192 pixels
LUMA key
PIP, FRZ, Black image
5 individual speed keys for instant selection with take effect
5 users preset memory
Tally output
RS-232 control
DC 12V input
13 Transition effect + soft border

3
Front Panel
POWER
Switches the power On / Off.
Logo Setting
Select SE-2000R Logo1, Logo2 or Clock Functions on the screen.
LUMA PVW / LUMA PGM
Step 1: Select LUMA source from sub source.
Step 2: Press LUMA PVW or LUMA PGM key.
This function only key LUMA on the PVW or PGM display channel.
9
7
8
6
3
4
5
1
1. Power
2. Logo Setting
3. LUMA PVW / LUMA PGM
4. Main / Sub Source
5. Effect Speed
2
6. TAKE
7. CUT
8. Video Effects
9. Menu and Controls

4
SET
SET key function: press SET key →press INV key →press ENTER key.
This function is retrieves previous resolution mode of output signal to multi
screen in case when the monitor doesn’t support a new mode selected from
SE-2000R MENU.
PIP PVW / PIP PGM
Step 1: Press SET key.
Step 2: Press PIP PVW key.
Step 3: Select PIP source from sub source CH1~4.
Step 4: Press PIP PVW or PIP PGM key.
This function is show PIP window on the PVW or PGM display channel.
PIP effect, which stands for Picture in Picture, you can set different sizes and
position.
Main Source
Used to select which of the four video input channels or background is sent
to the Main video output. For more information, see Video Source (Page 6).
Sub Source
Used to select which of the four video input channels or background will be
ransitioned to or used as a sub source in an effect.
Effect Speed
Selectable of five different speeds for transition effect.
CUT
Change the main/sub source immediately.
TAKE
Take the effect by preset speed.
Video Effects
10 effect keys, for more information, see Transition Effects (Page 6).
Menu and Controls
Menu button is SE-2000R functions configuration and setting, press the up,
down, left, right arrow button move to another control, and ENT button to
confirm the setting.

5
Video Source
Selecting the Main and Sub Video Sources is the first thing to do when setting up the SE-2000R.
The source you select (by pressing one of the buttons; a bright red LED on the selected button lights for
confirmation) on the Main Source bus is what is sent to the Video output. This means that you can perform cuts
between sources by simply pressing different buttons.
The Sub Source selection determines which input will be transitioned to when using any of the transition controls
and provides the video for Picture in Picture and Chroma Key functions.
Transition Effects (Reversible)
Right Down to Left High / Left High to Right Down
Right to Left / Left to Right
Top to Bottom / Bottom to UP
Left Down to Right High / Right High to Left Down
Inside Out / Outside In
Middle extend U/D / Middle extend L/R
Controls the border softness of the effect transforming.
Also known as a fade, is a transition wherein all the pixels of one source are replaced by all the
pixels of another, at a smooth rate, and at the same time.
Inverse effect move way.
Press the button once and the video freezes, press it again, and it returns to the selected
source in full motion.

6
Rear Panel
1
2
3
4
5
6
7
8
9
1. HD- SDI IN
2. HD- SDI IN / DVI-D IN
3. DVI-D IN
4. TALLY
5. RS-232
6. HD- SDI OUT
7. HD- SDI YUV OUT
8. MULTIVIEWER OUT
9. DC IN

7
HD- SDI IN
HD SDI Signal Input (Digital Inputs 1 to 3).
HD- SDI IN / DVI-D IN
The digital Inputs 4 has two kinds of digital modes for use (HD-SDI & DVI) you
can select the mode in MENU function.
For more information, see INPUT 4 MODE (Page 14).
DVI-D IN
DVI-I Signal Input (Digital Input 5).
TALLY
Tally out socket. This supplies tally light information up to seven buttons of
main source, and other seven button of sub source.
RS-232
9-pin serial port standard RS-232 interface.
Connect PC to update firmware.
HD- SDI OUT
4:2:2 SDI Video data supports SMPTE 292M standard at 1.5G Mbps.
SDI transfers professional level video signals and it’s can connect to long
distance transmission systems.
HD- YUV OUT
HD- YUV component analogue output connecters.
MULTIVIEWER OUT
DVI-D digital signal preview output connecter (PVW).
DC IN
DC in socket connect the supplied 12V 5A PSU to this socket. The connection
can be secured by screwing the outer fastening ring of the DC In plug to the
socket.

8
System Configuration
Press on the MENU button for system configuration, press the UP, DOWN,LEFT, RIGHT
button to select an item and press the ENT to confirm the setting.
1. USER’S PROFILE
- Press the MENU button and select item 1 for USER’S PROFILE.
- Press the arrows button to select an item and press the ENT to confirm the setting.
- 6 sets group (0~5) of user’s setting and recall.
*After SE-2000R firmware upgrade, you need to reload your (logo, background, name…etc) files to SE-2000R.
USER’S PROFILE
0 ~ 5
INTPUT SETTINGS
PIP SETTING
LUMA SETTINGS
LOGOS
MODE SETTING
MONITOR MODE
INPUT 4 MODE
MASTER USER SETTING
SOFT EDGE
AUTO TAKE SPEED
BACKGROUND
BLACK & BARS POS.RIGHT
FACTORY SETTINGS
CLOCK SETTINGS

9
2. INTPUT SETTINGS
- Press the MENU button and select item 2 for INTPUT SETTINGS.
- Press the arrows button to select an item and press the ENT to confirm the setting.
- BRIGHTNESS: adjustment range from -7 to +7
- CONTRAST: adjustment range from -7 to +7
- SATURATION: adjustment range from -7 to +7
USER’S PROFILE
INTPUT SETTINGS
BRIGHTNESS
-7 ~ +7
CONTRAST
-7 ~ +7
SATURATION
-7 ~ +7
MASTER USER SETTING
●
PIP SETTINGS
LUMA SETTINGS
LOGOS
MODE SETTING
MONITOR MODE
INPUT 4 MODE
MASTER USER SETTING
SOFT EDGE
AUTO TAKE SPEED
BACKGROUND
BLACK & BARS POS.RIGHT
FACTORY SETTINGS
CLOCK SETTINGS