DataLocker DL3 User manual

1
2
3
4
Connect the DL3/DL3FE with RFID, enter the
“Admin” passcode and select “Setup”.
Select the “System” option then select the
“Arrow” icon to move to the next screen.
Select the “RFID” option and select “On” to
enable RFID.
Select the “Add RFID Tag” option.
RFID Setup Guide
Swipe the RFID tag at the bottom right corner
of the device until you hear a beep.
5
6Record the Tag ID in case the physical tag is
lost.
Select the back arrow until you get back to the
“Connect” screen. Select “Connect” to save.
Video Setup Guide @Youtube.com/datalocker
7
Your settings have been saved and your RFID is
setup and ready for use.
DL3FE with RFID

Record Your RFID Tag ID
Record your 20 character RFID Tag ID. Two characters per space.
This Tag ID can be manually entered on the device in the event
you lose your RFID tag.
Tag ID 1 Date
Tag ID 2 Date
Tag ID 3 Date
Tag ID 4 Date