Datalogic Memor 1 User manual

Datalogic S.r.l.
Via San Vitalino 13
40012 Calderara di Reno (BO)
Italy
Tel. [phone]
Fax [phone]
©2018 Datalogic S.p.A. and/or its affiliates
All rights reserved. Without limiting the rights under copyright, no part of this documen-
tation may be reproduced, stored in or introduced into a retrieval system, or transmitted in
any form or by any means, or for any purpose, without the express written permission of
Datalogic S.p.A. and/or its affiliates. Owners of Datalogic products are hereby granted a
non-exclusive, revocable license to reproduce and transmit this documentation for the pur-
chaser's own internal business purposes. Purchaser shall not remove or alter any propri-
etary notices, including copyright notices, contained in this documentation and shall ensure
that all notices appear on any reproductions of the documentation. Should future revisions
of this manual be published, you can acquire printed versions by contacting your Datalogic
representative. Electronic versions may either be downloadable from the Datalogic website
(www.datalogic.com) or provided on appropriate media. If you visit our website and would
like to make comments or suggestions about this or other Datalogic publications, please let
us know via the "Contact Datalogic" page.
Disclaimer
Datalogic has taken reasonable measures to provide information in this manual that is
complete and accurate, however, Datalogic reserves the right to change any specification at
any time without prior notice.
Datalogic and the Datalogic logo are registered trademarks of Datalogic S.p.A. in many
countries, including the U.S.A. and the E.U. Memor is a trademark of Datalogic S.p.A. and/or
its affiliates. Google, Google Play and other marks are trademarks of Google LLC. All other
brand and product names may be trademarks of their respective owners.
Patents
See www.patents.datalogic.com for patent list.
Reference Documentation
For further information regarding Memor 1 refer to the SDK Help on-line and to the Memor
1 User’s Manual, downloadable from our website www.datalogic.com.
Support Through the Website
Datalogic provides several services as well as technical support through its website.
Log on to www.datalogic.com and click on the SUPPORT link which gives you access to:
Downloads by selecting your product model from the dropdown list in the Search by
Product field for specific Data Sheets, Manuals, Software & Utilities, and Drawings;
Repair Program for On-Line Return Material Authorizations (RMAs) plus Repair
Center contact information;
Customer Service containing details about Maintenance Agreements;
Technical Support through email or phone.
Warranty Terms and Conditions
The warranty period is 1 year for the device and 90 days for consumables (e.g. battery,
power supply, cable etc.) from date of purchase at our company.
Memor 1
Multi-Purpose Device for Retail
Quick Start Guide
822002841 (Rev. A) November 2018
Out of the Box
The Memor 1 package contains:
• Memor 1 (device with battery included)
•QuickStartGuide
•Safety&RegulatoryAddendum
Remove all the components from their packaging; check their integrity
and compare them with all the packing documents.
General View
Front View
Back View
Top View
CAUTION
Keep the original packaging for use when sending products to
the technical assistance center. Damage caused by improper
packaging is not covered under the warranty.
Touch Panel Display
Scan Key
Laser Safety
Label
Product
Label
Power Key
Data Capture Window
Side View
Pistol Grip Models
Handheld Models
Micro USB Port
Scan Trigger
See the Safety & Regulatory Addendum
included with your product for additional
regulatory, safety and legal information.
©2018 Datalogic S.p.A. and/or its affili-
ates. All rights reserved. Datalogic and
the Datalogic logo are registered trade-
marks of Datalogic S.p.A. in many coun-
tries, including the U.S. and the E.U.
www.datalogic.com

Charging Instructions
The Memor 1 is provided with the battery pack already installed and configured in Ship Mode at the
factory. To wake the device from Ship Mode, connect it to a power supply or insert it into a dock (for
more information, see the Getting Started section of the Memor 1 User’s Manual).
The battery pack is initially not fully charged. Before using the device, charge the battery with the
single slot dock locking, the single slot dock charge only, the 3-slot cradle or the Datalogic micro-USB
power supply.
Charge with the Single Slot Dock Locking
First plug the power cord into the power connector on the back of the dock, then connect the power
cord to the power supply.
Charge with the Single Slot Dock Charge Only
First plug the power supply into the power jack on the back of the dock, then plug the power supply
into a power outlet.
CAUTION
Use only the Datalogic power supply 91ACC0048 to power the Memor 1 Single Slot Dock
Locking.
The Single Slot Dock Locking cannot be daisy-chained to a Memor 1 3-Slot Cradle.
NOTE
Insert the device into the dock with the screen facing front and the head facing down.
For further information on the Memor 1 Single Slot Dock Locking, refer to the Single Slot Dock
Locking Quick Start Guide, included in the dock’s box.
11
2
1
2
2
1
Charge with the 3-Slot Cradle
There are two options to connect the cradle to the power supply: fast charge and standard charge.
Fast Charge
The fast charge connection allows to power one cradle with one power supply.
Plug the power supply cable into the power connector on the back of the cradle, then plug the power
supply into the AC/DC plug using a Datalogic power cable. Please see below an example of how to
insert the power supply cable through the wall mounting metal bracket:
Standard Charge
The standard charge connection allows to power two cradles with one power supply.
To connect a second cradle use the Memor 1 Cradle Power Jumper, available as optional accessory (P/
N 91ACC0049).
1. Connect the first cradle to the second cradle using the power jumper.
2. Connect the power supply to the first cradle.
3. Plug the power supply into the AC/DC plug using a Datalogic power cable.
CAUTION
Use only the Datalogic power supply included in the box to power the Memor 1 Single Slot
Dock Charge Only.
NOTE
Insert the device into the dock with the screen facing front and the head facing down.
CAUTION
Use only the Datalogic power supply 91ACC0048 to power the Memor 1 3-Slot Cradle.
NOTE
Insert the device into the dock with the screen facing front and the head facing down.
Under the same conditions, the fast charge connection can charge the battery up to twice as
fast as the standard charge connection.
For further information on the Memor 1 3-Slot Cradle, refer to the Memor 1 3-Slot Cradle
Quick Start Guide, included in the cradle’s box, and to the Memor 1 3-Slot Cradle Installation
Guide, downloadable from our website www.datalogic.com.
CAUTION
Do not put any foreign object such as, but not limited to, coins, paper clips, stickers inside the
slot of any of the docks.
Do not apply any sticker to the Memor 1 (see the examples below).
High Visibility High Density
Charge with USB
Use the Datalogic micro-USB power supply (p/n 94ACC1380) to charge the terminal from a power
outlet.
Scanning and Imaging
Imager Data Capture
Relative Size and Location of Aiming System Pattern
NOTE
The Memor 1 gets warm during charging. This is normal and does not mean a malfunction.
LINEAR BARCODE 2D MATRIX SYMBOL
11
2