Datalogic Skorpio X3 User manual

Coletor de Dados
Datalogic Skorpio X3
Este robusto computador Skorpio X3 é particularmente
adequado para soluções móveis de comércio no
ambiente de varejo, tanto nas prateleiras das lojas
quanto nos depósitos industriais.
www.bztech.com.br

Skorpio™ X3 Mobile Computer
Quick Start Guide
THE PACKAGE
The Skorpio X3 package contains:
Skorpio X3 mobile computer
Rechargeable standard battery pack
Terminal emulation overlay
Belt clip (handheld models only)
Belt clip pivot (handheld models only)
Hand-strap (pistol grip models only)
Quick Start Guide
Wavelink Avalanche Insert
End User License Agreement (EULA) Sheet
THE TERMINAL
A) Color display*
B) ON/OFF power key
C) LEDs
D) Receiver speaker
E) Front scan key
F) Keyboard
G) Laser safety label
H) Loudspeaker
I) Micro USB charging port
(Power Only)
J) Product label
K) Reset key (under battery)
L) MicroSD card slot (under
battery)
M) Trigger button (for use with the
optional pistol trigger)
N) Data capture window O) HandyLink™ connector
(host/device)
822001101
*Remove protective film cover before use
KEYPADS
Full-alphanumeric Keypad (50 Keys)
1. Navigation Keys
2. Scan Key:
3. Yellow Modifier
4. Blue Modifier
Alphanumeric Keypad (38 Keys)
1. Navigation Keys
2. Scan Key:
3. Yellow Modifier
4. Blue Modifier
Numeric Keypad (28 Keys)
1. Navigation Keys
2. Scan Key:
3. Yellow Modifier
4. Blue Modifier
Multitap Function
In the numeric keypad the number keys (key 0 excluded) and the ESC
key share the following behavior scheme:
A. Function of the key when directly pressed.
B. Modified by the Yellow key, repeated
presses cycle through the letters shown on
the keyboard overlay for each key. The
letter is entered if you wait for a short
timeout.
Special Function Icons
ICON FUNCTION
After a Blue modifier key press, the Start menu key opens the
Start menu.
After a Blue modifier key press, the File Manager key opens
the file manager.
After a Blue modifier key press, the Backlight key turns the
backlight on and off.
GETTING STARTED
Insert the Battery
Insert the battery's alignment lugs into the recesses, then press firmly
until the battery latch clicks twice:
Charge the Battery
With Micro-USB rapid charger
With Single Slot Dock
Don’t insert the wall charger into the micro-USB port
when the Skorpio X3 is inserted into the dock.
CAUTION
A
E
F
D
B C
G
H
I
J
L
K
M
N O
1
2
3 4
1
2
1
4
3
1
34
2
A
B

SYNCHRONISE YOUR DEVICE WITH THE PC
Set up Synchronisation using Windows Mobile® Device
Center
Windows Mobile Device Center is only compatible with Windows Vista
and Windows 7; if you run Windows XP or earlier, you have to download
Microsoft ActiveSync.
You can establish a connection to your Skorpio X3 through the following
interfaces:
USB either directly or through the Single Dock
RS232 either directly or through the Single Dock
Bluetooth®
To establish a partnership between the Skorpio X3 and a host PC, start
Windows Mobile® Device Center and follow the steps below:
1. Connect the Skorpio X3 to the host PC. Windows Mobile® Device
Center configures itself and then opens.
2. On the license agreement screen, click Accept.
3. On the Windows Mobile Device Center’s Home screen, click Set up
your device.
4. Select the information types that you want to synchronize, then
click Next.
5. Enter a device name and click Set Up.
When you finish the setup wizard, Windows Mobile Device Center
synchronizes the mobile computer automatically. Microsoft® Office
Outlook® emails and other information will appear on your device after
synchronization.
Communicate with Host
INSTALLING A MICROSD CARD
1. Turn off the Skorpio X3.
2. Pull the battery latch down and remove the battery pack:
3. Shift the cardholder upwards and then pull it up:
4. Insert the microSD card with the written part upward:
5. Lock the card into place by pushing the cardholder down and then
shifting it downwards:
6. Insert the battery's alignment lugs into the recesses, then press
firmly until the battery latch clicks twice.
SCANNING AND IMAGING
Laser Data Capture
Imager Data Capture
Linear barcode 2D Matrix symbol
ÌBX3ÉÎ
Relative Size and Location of Aiming System Pattern
REFERENCE DOCUMENTATION
For further information regarding Skorpio X3 refer to the SDK Help on-line
and to the Skorpio X3 User’s Manual.
For information regarding safety and regulatory refer to the dedicated
section of the Skorpio X3 User’s Manual.
PATENTS
This product may be covered by one or more of the following patents:
Design patents: EP1942723, USD677663, USD676850, ZL201230127985.6,
ZL201230128017.7
Utility patents: EP0681257B1, EP0789315B1, EP1128315B1,
EP1396811B1, EP1413971B1, IT1396943, US5481098, US5686716,
US5992740, US6412698, US6415978, US6454168, US6478224,
US6513714, US6561427, US6585157, US6808114, US6997385,
US7108170, US7299975, US7387246.
SERVICE AND SUPPORT
Datalogic provides several services as well as technical support through
its website.
Please check our website at www.datalogic.com under “Support &
Services”, then “Automatic Data Capture”, and click on the links indicated
for further information including:
- Downloads
- Manuals for the latest versions of user manuals and product
guides.
- Software & Utilities for the latest firmware release for your
product. You can also click on the following link for direct
access to this section: www.datalogic.com/products_updates.
- Service Program for warranty extensions and maintenance
agreements.
- Repair Centers for a list of authorised repair centers.
- Technical Support Automatic Data Capture email form to contact
our technical support.
WARRANTY TERMS AND CONDITIONS
The warranty period is 1 year for the device and 90 days for consumables
(e.g. battery, power supply, cable etc.) from date of purchase at our
company.
©2012-2013 Datalogic ADC S.r.l. • ALL RIGHTS RESERVED. •
Protected to the fullest extent under U.S. and international laws. •
Copying, or altering of this document is prohibited without express written
consent from Datalogic ADC S.r.l.
Datalogic and the Datalogic logo are registered trademarks of Datalogic
S.p.A. in many countries, including the U.S.A. and the E.U.
Skorpio and the Skorpio logo are trademarks of Datalogic ADC S.r.l.
All other brand and product names mentioned herein are for identification
purposes only and may be trademarks or registered trademarks of their
respective owners.