Datalogic SLIM User manual

SLIM
INSTRUCTION MANUAL
Safety Light Curtains

Datalogic S.r.l.
Via S. Vitalino, 13
40012 Calderara di Reno (BO)
Italy
Tel. [phone]
Fax [phone]
© 2015-2020 Datalogic S.p.A. and /or its affiliates
All rights reserved. Without limiting the rights under copyright, no part of this documentation may be repro-
duced, stored in or introduced into a retrieval system, or transmitted in any form or by any means, or for any
purpose, without the express written permission of Datalogic S.p.A. and/or its affiliates.
Owners of Datalogic products are hereby granted a non-exclusive, revocable license to reproduce and
transmit this documentation for the purchaser's own internal business purposes. Purchaser shall not
remove or alter any proprietary notices, including copyright notices, contained in this documentation and
shall ensure that all notices appear on any reproductions of the documentation.
Electronic versions of this document may be downloaded from the Datalogic website (www.datalogic.com).
If you visit our website and would like to make comments or suggestions about this or other Datalogic pub-
lications, please let us know via the "Contact" page.
Disclaimer
Datalogic has taken reasonable measures to provide information in this manual that is complete and accu-
rate, however, Datalogic shall not be liable for technical or editorial errors or omissions contained herein,
nor for incidental or consequential damages resulting from the use of this material. Datalogic reserves the
right to change any specification at any time without prior notice.
Trademarks
Datalogic and the Datalogic logo are registered trademarks of Datalogic S.p.A. in many countries, including
the U.S.A. and the E.U.
Patents
See www.patents.datalogic.com for patent list.
Original Instructions (ref. 2006/42/EC)

INSTRUCTION MANUAL iii
CONTENTS
PREFACE ...................................................................................................................V
About this Manual ............................................................................................................ v
Manual Conventions ............................................................................................................................v
Technical Support ............................................................................................................ v
Support Through the Website .............................................................................................................v
Reseller Technical Support ................................................................................................................ vi
COMPLIANCE ...........................................................................................................VII
CE Compliance ................................................................................................................ ix
GENERAL INFORMATION ............................................................................................1
General description .......................................................................................................... 1
Package contents .............................................................................................................2
How to choose the device ................................................................................................. 3
Detection capability .............................................................................................................................3
Height of the detection zone ...............................................................................................................4
Minimum installation distance ...........................................................................................................6
Typical applications .......................................................................................................... 8
Safety information ......................................................................................................... 10
INSTALLATION.........................................................................................................11
Precautions to be observed for the choice and installation ................................................ 11
General information on device positioning ....................................................................... 12
Minimum distance from reflecting surfaces ....................................................................................13
Distance between homologous devices ...........................................................................................15
Minimum distance for cascaded system ..........................................................................................17
Emitter and receiver orientation ......................................................................................................17
Use of deviating mirrors ...................................................................................................................18
Controls after first installation .........................................................................................................19
MECHANICAL MOUNTING .........................................................................................20
Fixing with “O” type brackets ......................................................................................... 20
Fixing with “C” type brackets ......................................................................................... 22
Fixing with “L” type brackets ......................................................................................... 23
Fixing with “L” type brackets and “C” type brackets ........................................................ 24
Cascade resolution with different brackets ...................................................................... 25
Cascade 90° resolution ................................................................................................... 26
ELECTRICAL CONNECTIONS .....................................................................................27
Pin-out and configuration pin connection ......................................................................... 27
Notes on connections ..................................................................................................... 29
Cascade connection ........................................................................................................ 31
ALIGNMENT PROCEDURE .........................................................................................32
COMMISSIONING AND CONFIGURATION ....................................................................35
Restart mode selection and Restart function .................................................................... 35
EDM function ................................................................................................................. 37
USER INTERFACE AND DIAGNOSTICS .......................................................................39
User interface ................................................................................................................ 39
PERIODICAL CHECKS................................................................................................41
General information and useful data ............................................................................... 42

CONTENTS
iv SLIM
Warranty ........................................................................................................................42
DEVICE MAINTENANCE ............................................................................................ 43
Product disposal .............................................................................................................43
TECHNICAL DATA .................................................................................................... 44
AVAILABLE MODELS AND RESPONSE TIMES ............................................................ 47
Available models ............................................................................................................47
Cascade response times .................................................................................................48
OVERALL DIMENSIONS ............................................................................................ 49
INCLUDED ACCESSORIES ......................................................................................... 50
“C” type brackets kit ......................................................................................................50
“O” type brackets kit ......................................................................................................50
ACCESSORIES.......................................................................................................... 51
(ST-K2-SL-C) “C” type brackets kit .................................................................................51
(ST-K4-SL-O) “O” type brackets kit ................................................................................51
(ST-K2-SL-L) “L” type brackets kit .................................................................................52
(ST-K2-SL-C-OR) “C” type orientable brackets kit ...........................................................52
(SE-S) Columns and floor stands .....................................................................................53
(SG-DM) Deviating mirrors .............................................................................................54
(TP) Test piece ...............................................................................................................56
Connection cables ..........................................................................................................56
Cascade cables ...............................................................................................................57
(SE-SR2) Safety relay ....................................................................................................58
(CSME-03VU24-Y14) EDM relay box ...............................................................................58
GLOSSARY............................................................................................................... 59

INSTRUCTION MANUAL V
PREFACE
ABOUT THIS MANUAL
This Product Reference Guide (PRG) is provided for users seeking advanced technical
information, including connection, programming, maintenance and specifications. The
Quick Reference Guide (QRG) and other publications associated with this product can
be downloaded free of charge from the website listed on the back cover of this manual.
Manual Conventions
The following conventions are used in this document:
The symbols listed below are used in this manual to notify the reader of key issues or
procedures that must be observed when using the reader:
NOTE
TECHNICAL SUPPORT
Support Through the Website
Datalogic provides several services as well as technical support through its website. Log
on to (www.datalogic.com).
For quick access, from the home page click on the search icon , and type in the name of
the product you’re looking for. This allows you access to download Data Sheets, Manu-
als, Software & Utilities, and Drawings.
Hover over the Support & Service menu for access to Services and Technical Support.
Notes contain information necessary for properly diagnosing, repairing and
operating the reader.
CAUTION
The CAUTION symbol advises you of actions that could damage equipment
or property.
WARNING
The WARNING symbol advises you of actions that could result in harm or
injury to the person performing the task.

PREFACE
VI SLIM
Reseller Technical Support
An excellent source for technical assistance and information is an authorized Datalogic
reseller. A reseller is acquainted with specific types of businesses, application software,
and computer systems and can provide individualized assistance.

INSTRUCTION MANUAL VII
COMPLIANCE

COMPLIANCE
VIII SLIM

CE COMPLIANCE
INSTRUCTION MANUAL IX
CE COMPLIANCE
CE marking states the compliance of the product with essential requirements listed in
the applicable European directive. Since the directives and applicable standards are
subject to continuous updates, and since Datalogic promptly adopts these updates,
therefore the EU declaration of conformity is a living document. The EU declaration of
conformity is available for competent authorities and customers through Datalogic
commercial reference contacts. Since April 20th, 2016 the main European directives
applicable to Datalogic products require inclusion of an adequate analysis and assess-
ment of the risk(s). This evaluation was carried out in relation to the applicable points of
the standards listed in the Declaration of Conformity. Datalogic products are mainly
designed for integration purposes into more complex systems. For this reason, it is
under the responsibility of the system integrator to do a new risk assessment regarding
the final installation.
Warning: This is a Class A product. In a domestic environment this product may cause
radio interference in which case the user may be required to take adequate measures.

COMPLIANCE
X SLIM