DAVUM TMC PB150M-V9 User manual

Electronics Industry
New
Products
All-Round Soldering Station
High Performance 3-Port Rework Station
INSTRUCTION MANUAL SIMPLIFIED OF THE STRIPPER
THERMAL PB150M-V9
The new version PB150M, DC voltage, with a new software and
highest temperature, has 5 easy touch that you can see below
with the meanings:
1 - Display settings
1.1 Programming
•Start the heater...
•Start the button "M". IND: V9_2018_AD_V1 the PB150M has 3 managed menus in a circular manner
through the "M" button:
•1 press "M" takes you on the selection of the active program button menu + and - to navigate through
available programs and V to validate the selection. The 'R' button to exit the Menu mode to return to
the main screen.
•1 additional support on the "M" button takes you to the menu to change the active program. To change
a program must then press 'V' then choose a temperature setting via the buttons + and-, press 'V' then
choose a value of tempo via the buttons + and -, press 'V' to save your changes and press again knew r
'V' to return to the main screen with the new schedule. At each step, press 'R' to go back.
•1 additional support on the "M" button takes you to the language selection menu. Button + and - to
navigate through the available languages and V to validate the selection. The 'R' button to exit the Menu
mode to return to the main screen. From these commands you can so change the x programs you need
(attention to the fact that change a program to him have selected beforehand) and then select as
needed.
•“M”: touch menu
•“+”: More
•“- “: Less
•“V”: key validation
•“R”: return key
Start of the PB on the main menu of the active program (the one that will apply to the closing of the clip,
see picture above). The bar at the bottom of the main screen is a picture of the temperature of the clamp
(1 bar = 10% of the set point, 2 bars = 20% of the set point...). Therefore, you will notice the presence of the
following information: number of active program, its temperature in °C setting and the value of tempo (in
seconds, which corresponds to the maximum heating time) with 0 seconds = no tempo.
From this screen you can then:
------------------------------------------------------------------------------------------------------------------
SAS AU CAPITAL DE 110.400 €
R.C.S.Bobigny B 321 784 407 – Siret 321 784 407 00025 – APE 4652Z- N° TVA FR 18 321 784 407

HAKKO is certified under ISO 9001 (JIS Q 9001),
the international standard for quality management systems.
We are also certified under ISO 14001 (JIS Q 14001)
and are actively involved in preserving the global environment.
Quality Tools for the
Click!
http://www.hakko.com/english/tip_selection/
• HAKKO WEBSITE
• SELECT TIP SHAPE
See the official HAKKO website for all necessary information
regarding HAKKO products and services.
Search for the appropriate tip for your work by
following the guidelines.
https://doc.hakko.com/?l=en
• DOCUMENT PORTAL
Download instruction manuals, MSDSs, and technical
documents from the HAKKO Document Portal.
Click!
P R O G R A M M E N 1 0 - T °: 8 2 0 ° C, T E M P O: 0 6 S *
P R E T *
NB: TEMPERATURE MAX = 860°C
Display: V9_2018_AD_V1 to access the menu of the PB150M (hidden menu) lock here are
the steps: 1) positioned on the main screen; 2) maintain the buttons '+' and '-' for 3 seconds; 3)
release these buttons; The accessibility of the product configuration screen will appear (see
below).
M E N U - A C C E S S I B I L I T E N I 1 * N I V 2 *.
There are two possibilities:
•Level 1 = Mode operator-> modification of the programs impossible.
•Level 2 = supervisor Mode-> modification of programs possible.
You can then select the mode you want via the buttons '+' and '-' and validate your choice via the 'Validate'
button. Alternatively, you can leave the menu hidden via the 'Cancel' button.
------------------------------------------------------------------------------------------------------------------
SAS AU CAPITAL DE 110.400 €
R.C.S.Bobigny B 321 784 407 – Siret 321 784 407 00025 – APE 4652Z- N° TVA FR 18 321 784 407

HAKKO is certified under ISO 9001 (JIS Q 9001),
the international standard for quality management systems.
We are also certified under ISO 14001 (JIS Q 14001)
and are actively involved in preserving the global environment.
Quality Tools for the
Click!
http://www.hakko.com/english/tip_selection/
• HAKKO WEBSITE
• SELECT TIP SHAPE
See the official HAKKO website for all necessary information
regarding HAKKO products and services.
Search for the appropriate tip for your work by
following the guidelines.
https://doc.hakko.com/?l=en
• DOCUMENT PORTAL
Download instruction manuals, MSDSs, and technical
documents from the HAKKO Document Portal.
Click!
2 - Adjustements tweezer
2.1 Setting of the trigger to optimize the electrodes' heating
In order to adjust the clamp to the different cable diameters, the tweezer is equipped with a height
adjustment, which allows to trigger the heating of more or less to the electrodes. The section of the wire is
important and must be adjusted with the heating. The wheel above follows this logic.
Moreover, we have developed two models of tweezers for stripping cables from AWG 30 mini section has
Max AWG8 and more section superior cables:
•Ref: PINCE150MG00 Special plier (AWG 0.00) - Complete set
•Ref: PB150M-PINCE Standard plier (AWG 8.30) - Complete set
2.2 Setting strip length
Move the stop located on the top of the electrode after you have unscrew the upper screw and adjust it
has the requested length.
For cables with a small cross-section, set the switch for immediate release, i.e. as soon as the closing the
clamp.
2.1 Adj. heating of electrodes 2.2 Setting the strip length
------------------------------------------------------------------------------------------------------------------
SAS AU CAPITAL DE 110.400 €
R.C.S.Bobigny B 321 784 407 – Siret 321 784 407 00025 – APE 4652Z- N° TVA FR 18 321 784 407

HAKKO is certified under ISO 9001 (JIS Q 9001),
the international standard for quality management systems.
We are also certified under ISO 14001 (JIS Q 14001)
and are actively involved in preserving the global environment.
Quality Tools for the
Click!
http://www.hakko.com/english/tip_selection/
• HAKKO WEBSITE
• SELECT TIP SHAPE
See the official HAKKO website for all necessary information
regarding HAKKO products and services.
Search for the appropriate tip for your work by
following the guidelines.
https://doc.hakko.com/?l=en
• DOCUMENT PORTAL
Download instruction manuals, MSDSs, and technical
documents from the HAKKO Document Portal.
Click!
PACKING LIST
c) 1x UE POWER CABLE
d) 1x STANDARD TWEEZER
P/N= PB150M-PINCE
b) 1x UK POWER CABLE
a) 1x POWER SUPPLY WITH SUPPORT AND CONNECTOR
•a) 1x Power supply with support and connector
•b) 1x UK power cable
•c) 1x UE power cable
•d) 1x Standard tweezer
•1x Instruction manual
------------------------------------------------------------------------------------------------------------------
SAS AU CAPITAL DE 110.400 €
R.C.S.Bobigny B 321 784 407 – Siret 321 784 407 00025 – APE 4652Z- N° TVA FR 18 321 784 407
TECHNICAL CHARACTERISTICS
•Input : 110 V - 230 V AC
•Power supply : AC/DC
•Power 140 W
•Red temperature : 200°C - 860°C
•Fuse : 2A
•USB plug