De Agostini MODEL SPACE Ford Mustang SHELBY GT-500 1967 User manual

TM

SHELBY®,CARROLL SHELBY’S SIGNATURE & INITIALS®, CARROLL SHELBY’S
PHOTOGRAPH, LIKENESS & VOICE®, GT-500®,THE SHELBY MODIFICATIONS
TO CREATE THE SHAPE AND DESIGN OF THE 1960s SHELBY GT-500 VEHICLE™
are registered trademarks and/or the trade dress of Carroll Shelby and Carroll
Shelby Licensing, Inc. (Shelby). COBRA and the COBRA SNAKE Designs are
trademarks of Ford Motor Company used under license.
TM
Editorial and design by Continuo Creative,
39-41 North Road, London N7 9DP
Published by De Agostini UK Ltd,
Battersea Studios 2, 82 Silverthorne Road,
London SW8 3HE, UK
© 2016 De Agostini UK Ltd
© 2016 Editorial Planeta DeAgostini S.A.
© 2016 De Agostini Publishing Italia S.p.A.
All rights reserved.
Warning: Not suitable for children under the age of 14.
This product is not a toy and is not designed
or intended for use in play.
Items may vary from those shown.
Index pack 21
Step 81 Left front wing ................................................................ 317
Step 82 Chassis front panel ........................................................319
Step 83 Right front wing .............................................................323
Step 84 Body ....................................................................................325

12
STEP BY STEP
Left front wing
PARTS SUPPLIED WITH THIS ISSUE
81-1 LEFT FRONT FENDER PARTS SUPPLIED
Care of the parts
It is important to handle and
store your parts carefully,
whether they are to be used in
the assembly stage they come
with or during later stages.
Some parts are very fragile,
and must be protected against
any scratches and bumps that
might damage the paintwork
or even the parts themselves.
81-1
81-1
Items may vary from those
shown, and there may be
colour differences because
of the materials used.
INSTALLATION DIAGRAM
FM_81_12_15_StepbyStep.indd 12 03/05/2017 19:02
317
Step by step #81

13
STEP BY STEP
STAGE COMPLETE
Step 81-A Step 81-B
Although the left front wing (81-1) should not be tted
yet, you should take the opportunity to test-t it. The
two parts arrowed on the wing engage with the two
arrowed points on the chassis.
Here is what the left front wing will look like in place.
Note: the model shown
here is the prototype.
FM_81_12_15_StepbyStep.indd 13 03/05/2017 19:02
318
Step by step #81

12
STEP BY STEP
Chassis front panel
PARTS SUPPLIED WITH THIS ISSUE
82-1 CHASSIS FRONT PANEL
82-2 LEFT HOOD BRACKET
82-3 1.8 X 3MM SCREWS (MP09)
82-4 RIGHT HOOD BRACKET
82-5 2.3 X 4MM SCREWS (MD06)
Spare parts
Some extra screws and other
parts may be provided as spares.
Store them safely in labelled
plastic bags, so that you can
identify them easily should you
need them.
PARTS SUPPLIED
82-2
82-4 82-5
82-3
82-1
81-1
82-4
82-3
82-3
82-1
82-5
82-2
82-5
INSTALLATION DIAGRAM
Items may vary from those
shown, and there may be
colour differences because
of the materials used.
Care of the parts
It is important to handle and
store your parts carefully,
whether they are to be used in
the assembly stage they come
with or during later stages.
Some parts are very fragile,
and must be protected against
any scratches and bumps that
might damage the paintwork
or even the parts themselves.
FM_82_12_15_StepbyStep.indd 12 17/05/2017 21:46
319
Step by step #82

13
STEP BY STEP
Step 82-B
Insert the post into the hole.
Step 82-A
Align the indicated post on the left hood bracket (82-2)
with the indicated hole in the chassis front panel (82-1).
Step 82-D
Insert the right hood bracket (82-4) into the hole at the
other end of the chassis front panel.
Step 82-C
Turn the panel over and tighten an MP09 screw (82-3)
into the indicated hole.
FM_82_12_15_StepbyStep.indd 13 17/05/2017 21:46
320
Step by step #82

14
STEP BY STEP
Step 82-F
Now retrieve the left front wing (81-1). Place the two
indicated holes in the chassis front panel onto the two
posts in the wing.
Step 82-E
As before, hold the bracket in position and secure it with
a second MP09 screw (82-3).
Step 82-H
This is how the parts will t to the rest of the model.
Step 82-G
Fix the two parts together with two MD06 screws (82-5).
FM_82_12_15_StepbyStep.indd 14 17/05/2017 21:46
321
Step by step #82

15
STEP BY STEP
Step 82-I
Here is the chassis front
panel connected to the wing.
STAGE COMPLETE
Note: the model shown
here is the prototype.
FM_82_12_15_StepbyStep.indd 15 17/05/2017 21:46
322
Step by step #82

12
STEP BY STEP
Right front wing
PARTS SUPPLIED WITH THIS ISSUE
83-1 RIGHT FRONT WING
83-2 2.3 X 4MM SCREWS (MD06)
Spare parts
Some extra screws and other
parts may be provided as spares.
Store them safely in labelled
plastic bags, so that you can
identify them easily should you
need them.
PARTS SUPPLIED
83-1
83-2
83-2
Items may vary from those
shown, and there may be
colour differences because
of the materials used.
INSTALLATION DIAGRAM
83-2
83-1
FM_83_12_15_StepbyStep.indd 12 20/05/2017 16:22
323
Step by step #83

13
STEP BY STEP
Step 83-A Step 83-B
Step 83-C
Align the indicated posts at the front of the wing (83-1) with the holes in the
right side of the front chassis panel from the previous stage.
Secure the parts with two MD06
screws (83-2).
Here is how the assembly should
now look.
STAGE COMPLETE
Note: the model shown
here is the prototype.
Care of the parts
It is important to handle and store your
parts carefully, whether they are to be
used in the assembly stage they come
with or during later stages. Some parts
are very fragile, and must be protected
against any scratches and bumps that
might damage the paintwork or even
the parts themselves.
FM_83_12_15_StepbyStep.indd 13 20/05/2017 16:22
324
Step by step #83

12
STEP BY STEP
Body
PARTS SUPPLIED WITH THIS ISSUE
84-1 BODY
84-2 2.3 X 4MM SCREWS (MD06)
Spare parts
Some extra screws and other
parts may be provided as spares.
Store them safely in labelled
plastic bags, so that you can
identify them easily should you
need them.
PARTS SUPPLIED
84-2
84-1
84-1
82-1
84-2
83-1
84-2
84-2
84-2
INSTALLATION DIAGRAM
Items may vary from those
shown, and there may be
colour differences because
of the materials used.
81-1
FM_84_12_15_StepbyStep.indd 12 22/05/2017 13:56
325
Step by step #84

13
STEP BY STEP
Care of the parts
It is important to handle and store
your parts carefully, whether they
are to be used in the assembly
stage they come with or during
later stages. Some parts are very
fragile, and must be protected
against any scratches and bumps
that might damage the paintwork
or even the parts themselves.
Step 84-A
To avoid damaging the paintwork on
any of the body parts, you should
work on a soft surface, like a cloth.
The posts on the inside of the front
wings will engage with the indicated
holes in the front of the body (84-1).
Step 84-B
Align the rear of the front end
assembly (the wings) with the front
of the body.
Step 84-C
Lower the posts on the underside
of the wings into the corresponding
holes in the body.
FM_84_12_15_StepbyStep.indd 13 22/05/2017 13:56
326
Step by step #84

14
STEP BY STEP
Step 84-D
Hold the parts together and turn
them over so you can access the
underside. Tighten one MD06 screw
(84-2) into the indicated hole.
Step 84-E
Tighten the second MD06 screw into
the arrowed hole on the other side.
Step 84-F
Tighten another two MD06 screws
(84-2) into the two remaining holes,
next to the rst two.
FM_84_12_15_StepbyStep.indd 14 22/05/2017 13:56
327
Step by step #84

15
STEP BY STEP
Step 84-G
Once the parts are secure, there
should be a small gap between the
the bottom of the wing and the
doorpost.
Step 84-H
Here is how the body should now look.
Note: the model shown
here is the prototype.
STAGE COMPLETE
FM_84_12_15_StepbyStep.indd 15 22/05/2017 13:56
328
Step by step #84