De Agostini ModelSpace Fast & Furious pack 4 User manual

4
pack

Pack 4
Stage 13
Assembling
the engine block (I)
Stage 14
Assembling
the engine block (II)
Stage 15
Assembling
the engine block (III)
Stage 16
Assembling
the engine block (IV)
Editorial by: Milanoedit srl, milanoedit.com
Translation by: TperTradurre
Picture credits: NBCUniversal Archive
© 2019 Universal City Studios LLC.
Fast & Furious and all related marks and characters are trademarks
and copyrights of Universal Studios.
All Rights Reserved.
Dodge, HEMI and related logos, vehicle model names and trade
dress are trademarks of FCA US LLC and used under license by
Premium and Collectibles Trading Co. Ltd. ©2019 FCA US LLC.
© 2019 Editorial Planeta DeAgostini S.A.U.
Todos los derechos reservados.
© 2019 De Agostini Publishing Italia S.p.A.
Tutti i diritti riservati.
Warning: Not suitable for children under the age of 14.
This product is not a toy and is not designed or intended for use
in play.
Items may vary from those shown.

STAGE
49
These items are not toys; keep out of reach of children. The product is part of an assembly kit intended for an adult audience.
Assemble with the utmost care following the instructions in the attached manual; modifications or tampering are prohibited. Made in China. Read and keep for further reference.
Publisher Note: the appearance of the parts shown on these pages may differ from that of the pieces included in this pack. This in no way affects the quality or assembly instructions.
PIECES FOR THIS STAGE
In this assembly session, you will start to build the engine block of your model car. Follow our instructions
carefully, using the illustrations to help you.
13A Engine block, left bank
13B Oil lter mount
13C Oil lter
13D Engine block, right bank
13E Oil pan
13F Left engine mounting bracket
13G Right engine mounting bracket
12H Starter motor, piece 2
AM Screw 2×4 mm (x 12)*
AP Screw 1.7×4 mm (x 2)*
ENGINE BLOCK
ASSEMBLING
THE ENGINE BLOCK (I)
13
PIECES FOR THIS STAGE
* Some of the parts are spares.
13A 13D
13E 13F 13G
13B 13C
AM AP

50
13C
13B
AP
13A
13B
13A
AP
STAGE 13
13.1
Align the linchpin inside the oil
filter 13C with the hole in the
mount 13B. Join the pieces
together with a type AP screw.
13.2
now AttAch the piece
you have just made to the left
bank of the engine block 13A.
To do this, insert the linchpins on the oil filter
mount 13B into the corresponding holes.
13.3
now turn the left bank 13A over and insert a
type AP screw; tighten the screw to fix the piece in
place.

51
AM
13F
13B
13A
AM
12A
13A
AM
13G
13D
STAGE 13
13.4
Find the rectangular groove on the top surface of the left bank
13A. Put the left engine mounting bracket 13F into the groove,
with the longest arm facing the oil filter. Join the pieces with two
type AM screws.
13.6
now put the right engine mounting bracket 13G into
the rectangular groove in the right bank 13D. Position the
pieces as shown in the illustration and join the two
elements together with two type AM screws.
13.5
tAke the gearbox you assembled in
the last session and position it as
shown in the illustration. Align the
holes in the protruding rectangular piece on the base of
the gearbox with the two linchpins on the inside wall of
the left bank 13A. Join the two elements with two type
AM screws.

52
AM
13A13D
AM
13D
13E
13A
STAGE
STAGE 13 FINAL RESULT
13
13.7
now put the two banks of the
engine block (13A and 13D) together by
aligning the holes with the fixing
linchpins. Fix in place with two type AM screws.
13.8
now AttAch the oil pan 13E,
ensuring that it is facing the same way as
shown in the illustration. Attach it to the
engine block with two type AM screws.
This is the result of this
interesting assembly session.
Keep what you have built so
far in a safe place until
needed.

STAGE
53
These items are not toys; keep out of reach of children. The product is part of an assembly kit intended for an adult audience.
Assemble with the utmost care following the instructions in the attached manual; modifications or tampering are prohibited. Made in China. Read and keep for further reference.
Publisher Note: the appearance of the parts shown on these pages may differ from that of the pieces included in this pack. This in no way affects the quality or assembly instructions.
PIECES FOR THIS STAGE
14
In this assembly session, you will continue assembling the engine block of your model car. Follow our
instructions carefully, using the illustrations to help you.
* Some of the parts are spares.
ENGINE BLOCK
14A Cylinder head, left bank
14B Cylinder head, right bank
14C Cylinder head covers (x 2)
14D Oil ller caps (x 2)
14E Oil ller cap covers (x2)
CP Screws 1.7×3 mm (x 14)*
DP Screws 1.5 ×4 mm (x 3)*
14A
14C 14D 14E
14B
CM DP
ASSEMBLING
THE ENGINE BLOCK (II)

54
14D
14C
DP
14C
14E
14D
14A
13A
CM
STAGE 14
14.1
tAke one of the oil filler caps 14D and slide it
onto the corresponding linchpin on one of the two
cylinder head covers 14C. Attach with a type DP
screw.
14.2
put a cap cover 14E on it. Press down
gently to attach it.
14.3
AttAch the left bank cylinder head 14A (indicated with
the letter “L” on the bottom) to the left side of the assembled
engine block. Ensure that it is facing the same way as that
shown in the illustration, then fix in place with two type CM screws.

55
CM
14A 14C
DP
14E
14D
14C
13D
CM
14B
STAGE 14
14.4
put the previously assembled cover 14C onto the cylinder head
14A. Ensure that both pieces are facing the correct way and then
join them together with four type CM screws.
14.6
AttAch the right cylinder head 14B to the engine
block 13D using two type CM screws.
14.5
put the oil filler cap 14D and the
corresponding cap cover 14E onto the
second cover 14C.

56
CM
14C
14B
STAGE
STAGE 14 FINAL RESULT
14.7
FinAlly, attach the right cylinder
head cover to the engine block with four
type CM screws.
The engine for your model
now has two cylinder heads
with covers. You will continue
building the engine in the
following assembly sessions.
14

STAGE
57
These items are not toys; keep out of reach of children. The product is part of an assembly kit intended for an adult audience.
Assemble with the utmost care following the instructions in the attached manual; modifications or tampering are prohibited. Made in China. Read and keep for further reference.
ENGINE BLOCK
Publisher Note: the appearance of the parts shown on these pages may differ from that of the pieces included in this pack. This in no way affects the quality or assembly instructions.
PIECES FOR THIS STAGE
15
In this assembly session, you will be working with the inlet manifold and the air intake of the supercharger.
Follow our instructions carefully, using the illustrations to help you.
* Some of the parts are spares.
ASSEMBLING
THE ENGINE BLOCK (III)
15A
15E
15I 15J
15F 15G 15H
15B 15C 15D
AP CM
15A Inlet manifold (piece 1)
15B Inlet manifold (piece 2)
15C Inlet manifold (piece 3)
15D Supercharger housing
15E Rear plate of supercharger
15F Fuel injectors (x 10)*
15G Fuel injection lines 1 (x 2)
15H Fuel injection lines 2 (x 2)
15I Fuel injection lines 3 (x 2)
15J Fuel injection lines 4 (x 2)
AP Screws 1.7×4 mm (x 19)*
CM Screws 1.7×3 mm (x 5)*

58
15A
15B
AP
AP
15C
15B
AP
AP
15B
13A
13D
CM
CM
AP
15D
15E
STAGE 15
15.1
Align the four mounting holes in piece 1 of the inlet
manifold 15A with the corresponding linchpins on piece 2
15B, ensuring the pieces face the same way as those in the
illustration. Attach with four type AP screws.
15.2
you will now attach piece 3 of the inlet manifold
15C. Align the four mounting holes with the linchpins on
piece 2 15B. Join with four type AP screws.
15.3
tAke the engine block you assembled in the
previous sessions. Attach the completed inlet
manifold by aligning the four holes with the
corresponding linchpins, then fix in place with four type CM screws.
15.4
Join the two parts 15E and 15D of the supercharger
together, using two type AP screws.

59
AP
AP
15D 15E
15B
1D
1H
1G
AP
1H
15E
1I
15G
15F
15F
15F
15F
15H
15I
15J
STAGE 15
15.5
AttAch the piece you assembled above to piece 2
of the inlet manifold 15B, with the parts facing the
same way as those in the illustration. Join with four
type AP screws.
15.6
tAke the air intake unit you assembled in the first assembly session.
Carefully detach the air intake from the supercharger.
15.7
put the supercharger unit 1H and the housing 15D together.
Make sure the side with the pulley is facing the right way.
15.8
AttAch the fuel injectors 15F to the fuel injection lines
15G, 15H, 15I and 15J, by inserting the shortest end of
each line into the fuel injectors.

60
1G
1L
15F
15G
15I
15F
1G
1L
15F
15H
15J
15F
15G
15H
15I
15F 15F 15F 15F
15J
1L
STAGE 15 FINAL RESULT
STAGE 15
15.9
turn the air intake over, as
shown in the illustration. Insert the
free end of the fuel injection line 3
15I into the top left hole in the distributor 1L, and
the linchpin on its fuel injector 15F into the third hole
from the left in the injector plate 1G. Insert the free
end of the fuel injection line 1 15G into the bottom
left hole in the distributor 1L, and the linchpin on its
fuel injector 15F into the first hole on the left in the
injector plate 1G.
15.10
insert the free end of the fuel injection line 4 15J
into the top right hole in the distributor 1L, and the
linchpin on its fuel injector 15F into the last hole in
the injector plate 1G. Now insert the free end of the fuel injection line 2 15H
into the bottom right hole in the distributor 1L, and the linchpin on its fuel
injector 15F into the second a last hole in the injector plate 1G.
15.11
AttAch the remaining fuel
injection lines to the right side
of the injector plate 1G, in the
same way you did for the left side.

STAGE
61
These items are not toys; keep out of reach of children. The product is part of an assembly kit intended for an adult audience.
Assemble with the utmost care following the instructions in the attached manual; modifications or tampering are prohibited. Made in China. Read and keep for further reference.
16A
16I 16N 16O
16H
16G
16F
16J
16K
16L
16M
16B 16C 16D 16E
AP CM
ENGINE BLOCK
Publisher Note: the appearance of the parts shown on these pages may differ from that of the pieces included in this pack. This in no way affects the quality or assembly instructions.
PIECES FOR THIS STAGE
16
16A Timing cover
16B Water pump
16C Rotor
16D Distributor cap
16E Spark plug wire connectors (x 10)*
16F Spark plug wire 8 cm
16G Spark plug wire 7 cm
16H Spark plug wire 6 cm
16I Spark plug wire 5 cm
16J Spark plug wire 10 cm
16K Spark plug wire 12 cm
16L Spark plug wire 14 cm
16M Spark plug wire 15 cm
16N Fan sprocket
16O Bushings (x 2)
AP Screws 1.7×4 mm (x 19)*
CM Screws 1.7×3 mm (x 5)*
In this assembly session, you will prepare the second wheel and attach the front section of the chassis to your
model car.
ASSEMBLING
THE ENGINE BLOCK (IV)
* Some of the parts are spares.

62
16E
16D
16D
16C
16B
16C
AP
16O 16O
16N
AP
16B
16N
STAGE 16
16.1
cAreFully detAch
the connectors 16E from the sprue,
ensuring that you don’t break the
mounting linchpins. Now insert eight connectors into the
distributor cap 16D, ensuring they are facing the same
way as those in the illustration.
16.2
AttAch the distributor cap to the rotor 16C,
using the corresponding fixing linchpin.
16.3
Align the mounting hole in the rotor 16C with
the corresponding hole in the water pump 16B.
Join the pieces with a type AP screw.
16.4
slide the two bushings 16O onto the smooth
end of the fan sprocket 16N. Note: the pieces
must be positioned in exactly the same way as
those in the illustration.
16.5
now AttAch
what you have just
assembled to the water
pump 16B, using the four small fixing
linchpins. Use a type AP screw to make
the piece more stable.

63
CM
16A
CM
16A
16B
16H
16E
14C
16I
16E
14C
16F
16G
STAGE 16
16.7
AttAch the water pump 16B to the front
of the engine and fix in place with two type
CM screws.
16.6
tAke the engine block. Put the timing cover
16A onto the front of the block and fix in
place with two type CM screws.
16.8
slide one end of the spark plug wire 16I (5 cm)
onto the central spark plug wire connector 16E.
Connect the other end to the
linchpin closest to the cylinder head cover
14C. Now connect the wire 16H (6
cm) to the second linchpin on the
cylinder head cover and to the
bottom left spark plug wire
connector 16E.
16.9
connect spark plug wire 16G (7 cm) to the
left spark plug wire connector 16E and to the
third linchpin on the cylinder
head cover 14C. Using the spark plug
wire 16F (8 cm), connect the top left
spark plug wire connector 16E to
the last linchpin on the cylinder
head cover 14C.

64
16J
16E
1I
16M
16J
14C
16M
16L
1I
16E
16K
16L
STAGE
STAGE 16 FINAL RESULT
16
16.10
slide one end of the spark plug
wire 16M (15 cm) onto the top left
spark plug wire connector 16E and
the wire 16J (10 cm) onto the bottom right connector. On
the other side, by passing the wires underneath the
supercharger pulley 1I, slide the free end of the wire 16M
onto the furthest linchpin on the cylinder head cover 14C,
and the free end of wire 16J onto the first linchpin on the
cylinder head cover 14C.
16.11
slide the spark plug wire 16L (14 cm) onto the
top spark plug wire connector
16E, and the wire 16K
(12 cm) onto the remaining connector. Pass
the wires underneath the supercharger
pulley and connect wire 16L to the
furthest linchpin on the cylinder head
cover 14C. Finally, connect wire 16K
to the remaining linchpin on the
cylinder head cover.
You have now installed the
rotor and the spark plug wires
in the engine of your model car.
Put what you have built so far in
a safe place.