De Agostini MODEL SPACE FAST & FURIOUS DODGE CHARGER R/T User manual

3
pack

Pack 3
Stage 9
Front right suspension
and the chassis
Stage 10
Steering and right suspension
Stage 11
Assembling the front right
wheel
Stage 12
Assembling the gear box
Editorial by: Milanoedit srl, milanoedit.com
Translation by: TperTradurre
Picture credits: NBCUniversal Archive
© 2019 Universal City Studios LLC.
Fast & Furious and all related marks and characters are trademarks
and copyrights of Universal Studios.
All Rights Reserved.
Dodge, HEMI and related logos, vehicle model names and trade
dress are trademarks of FCA US LLC and used under license by
Premium and Collectibles Trading Co. Ltd. ©2019 FCA US LLC.
© 2019 Editorial Planeta DeAgostini S.A.U.
Todos los derechos reservados.
© 2019 De Agostini Publishing Italia S.p.A.
Tutti i diritti riservati.
Warning: Not suitable for children under the age of 14.
This product is not a toy and is not designed or intended for use
in play.
Items may vary from those shown.

STAGE
33
These items are not toys; keep out of reach of children. The product is part of an assembly kit intended for an adult audience.
Assemble with the utmost care following the instructions in the attached manual; modifications or tampering are prohibited. Made in China. Read and keep for further reference.
Publisher Note: the appearance of the parts shown on these pages may differ from that of the pieces included in this pack. This in no way affects the quality or assembly instructions.
PIECES FOR THIS STAGE
In this stage you will continue to assemble the front right suspension and the elements that make up the
front section of the chassis.
9A Front right suspension lower control
arm anchor
9B Front right suspension lower control
arm
9C Suspension bump stop
9D Shock absorber piston
9E Suspension ball joint (piece 2)
9F Front right spindle (piece 2)
9G Front suspension torsion bar
9H Front right chassis beam cover plate
(piece 1)
9I Front right chassis beam cover plate
(piece 2)
9J Spring
9K Right engine mount plate
AM Screw 2×4 mm (x 2)*
CM Screw 1.7×3 mm (x 10)*
DM Screw 1.7×3×5 mm (x 2)*
DP Screw 1.5×4 mm (x 3)*
EM Screw 2×3×6 mm (x 3)*
FM Screw 2×5 mm (x 5)*
IM Screw 2×5×5 mm (x 2)*
KM Screw 1.7x4 mm (x3)*
BRAKE AND FRONT RIGHT SUSPENSION
FRONT RIGHT
SUSPENSION
AND THE CHASSIS
9
PIECES FOR THIS STAGE
* Some of the parts are spares.
9A 9B 9C 9D 9E 9F
9G 9H 9I
9J 9K AM CM DM DP EM FM IM KM

34
5A
9I
9K CM
AM
CM
5A
9H
5A
9G
DM IM
5A
9A
9G
STAGE 9
9.1
Take the front section of chassis and position the cover plate
1 9H on the right beam of the chassis 5A, with the smooth side
of the cover plate facing upwards. Attach the cover plate
using two type CM screws.
9.2
Onthe same side of the chassis 5A, insert the
engine mount plate 9K into the rectangle groove in
the beam. The hole with the flange must be facing
upwards, as shown in the illustration. Attach the piece with a type
AM screw. Position the cover plate 2 9I with the smooth side facing
upwards, and fix the piece in place with a type CM screw, using the
middle hole.
9.3
Carefully insert the wide end of the torsion bar 9G into
the hole closest to the right beam of the chassis 5A. To attach
the bar, insert a type DM screw from the outer side of the
chassis.
9.4
Turn the front section of the chassis 5A upside down and put
the front right suspension lower control arm anchor 9A onto the
small slit in the middle of the right beam. At the same time,
insert the free end of the torsion bar 9G into the hole on the side of the anchor
9A. Fix in place with a type IM screw.

35
FM 9E
9D
9B
EM
9C
9E
9D
9B
9F
9F
CM
8C
8I
9D
9J
EM
FM
8H
9B
9A
5A
STAGE 9
9.5
POsiTiOn the suspension ball joint 9E between the two
side plates on the lower control arm 9B. Attach the pieces
together with a type FM screw. Insert the shock absorber
piston 9D between the two adjacent holes and attach with another type
FM screw.
9.6
inserT the suspension bump stop 9C into the hole in
the lower control arm 9B next to the shock absorber
piston 9D. Put the ball joint 9E into the spindle 9F. To
attach the piece, insert a type EM screw from underneath
and tighten.
9.7
GeT the pieces you assembled in stage 8.
Insert the spring 9J into the shock absorber
unit 8C, followed by the shock absorber piston
9D. Then align the two tongues on the spindle 9F with the
holes on the brake caliper baseplate 8I and join the pieces
together with two type CM screws.
9.8
MOunT the assembled right suspension onto
the right beam of the front section of the chassis
5A, inserting the linchpins on the suspension dome
8H into the holes in the middle of the beam. Attach the dome 8H
to the chassis with two type FM screws, inserting them from
underneath. Put the end of the lower control arm 9B and the
lower control arm anchor 9A together, and attach them together
with a type EM screw.

36
DP
7E
7D
CM
CM
KM
5A
6A
7A
THE FRONT SECTION OF THE
CHASSIS MUST BE UPSIDE
DOWN
DP
7E
9B
STAGE
STAGE 9 FINAL RESULT
9
This illustration
shows the various parts
attached to the front
section of the chassis: the
suspension units, the
stabilizer bar and the
engine guard plate.
9.9
Turn the front section of the chassis 5A
upside down. Position the engine guard
plate 7A and the stabilizer bar 7D you
made in stage 7 on the front crossmember 6A. Align the
holes and attach the pieces together with three type CM
screws and two type KM screws, using the holes shown
in the illustration.
9.10
Turn the chassis back over and, on the
right side, align the head of the stabilizer bar
7E with the free hole in the lower control arm
9B. Join the pieces together with a type DP screw.
9.11
rePeaT the steps illustrated in step 10 for the
left side of the chassis.Attach the stabilizer
bar 7E to the lower control arm 4N, using a type
DP screw.

STAGE
37
These items are not toys; keep out of reach of children. The product is part of an assembly kit intended for an adult audience.
Assemble with the utmost care following the instructions in the attached manual; modifications or tampering are prohibited. Made in China. Read and keep for further reference.
Publisher Note: the appearance of the parts shown on these pages may differ from that of the pieces included in this pack. This in no way affects the quality or assembly instructions.
PIECES FOR THIS STAGE
10
With the pieces attached to the tenth stage, you can assemble the parts of the steering system and continue
assembling the front right suspension.
* Some of the parts are spares.
STEERING AND FRONT RIGHT SUSPENSION
10A Ball joints for the steering (x 5)
10B Tie rod
10C Central steering bar
10D Left tie rod anchor
10E Right tie rod anchor
10F Tie rod end links (x 2)
10G Front suspension stay rods (x 2)
CM Screws 1.7×3 mm (x 8)*
JM Screws 1.7×5 mm (x 6)*
STEERING
AND RIGHT
SUSPENSION
10A
10D 10E 10F 10G
10B 10C
CM JM

38
10C
10A
10B
JM
10A
10F
10E
10C
JM
10F
10E
CM
CM
10C
10F
10D
10A
JM
10D
10F
CM
CM
STAGE 10
10.1
inserT the cylindrical end of one of the tie rod end
links 10F into the eyes of the left tie rod anchor 10D
(indicated with the letter “L”). Join the pieces with two
type CM screws.
10.3
PuT the second tie rod end link 10F and the
right tie rod anchor 10E (indicated by
the letter “R”) together. Join them
with two type CM screws.
10.4
Take the assembled central bar. Insert one ball
joint 10A into the second-to-last hole in the right
end. Attach the end link you just prepared and fix it
in place with a type JM screw, inserting it from the inside.
10.2
PuT one ball joint 10A into the third-to-last hole in
the central bar 10C. Line up the hole in the ball joint
with the holes in the forked end of the end link used in
step 10.1. Use a type JM screw to join them together, inserting it from the
inside of the assembled part.
10.5
inserT a ball joint 10A into the last hole in the right
end of the bar and then put it into one of the ends of
the tie rod 10B. Fix it in place with a type JM screw.

39
FRONT SECTION
OF THE CHASSIS
10C
5D
10A
JM
10D
10E
7A
CM
10A
10B
9F
JM
STAGE 10
10.6
Take the chassis you have built so far and position it
as shown in the illustration. Insert a ball joint 10A into
the second hole in the left end of the central bar 10C.
Insert it into the forked end of the left tie rod 5D. Join them together with
a type JM screw.
10.7
aliGn the free ends of the tie rod 10B with the
front right spindle (piece 2) 9F. Insert the last ball joint
10A into the spindle 9F from underneath and attach
with a type JM screw.
10.8
aliGn the left tie rod anchor 10D and the right tie
rod anchor 10E with the holes in the edge of the
engine guard plate 7A. Look at the illustration to
ensure they are positioned correctly and then fix in place with two type
CM screws.
MODEL-MAKER’S TIP
You can change the wheel alignment slightly by varying
the position of the screws that hold the tie rod end links
and the two anchors together.

40
10G
6A 4N
10G
6A
9B
STAGE
STAGE 10 FINAL RESULT
10
10.9
lOOk carefully at the front suspension stay rods
10G: they are slightly bent. Take one stay rod 10G
and insert its shortest segment into the indicated
small hole in the lower control arm 9B. Insert the other end of the stay
rod 10G into the hole in the front chassis crossmember 6A.
10.10
inserT
the
second
stay rod 10G into the left side of
the chassis. The shortest segment
goes into the lower control arm
4N and the longest into the front
chassis crossmember 6A.
You can admire the result
of this assembly session in the
illustration. Put the section of
the chassis you have
assembled in a safe place.

STAGE
41
These items are not toys; keep out of reach of children. The product is part of an assembly kit intended for an adult audience.
Assemble with the utmost care following the instructions in the attached manual; modifications or tampering are prohibited. Made in China. Read and keep for further reference.
11A 11B 11C
11E 11F
11D
HM IM
Publisher Note: the appearance of the parts shown on these pages may differ from that of the pieces included in this pack. This in no way affects the quality or assembly instructions.
PIECES FOR THIS STAGE
11
ASSEMBLING
THE FRONT
RIGHT WHEEL
In this assembly session, you will prepare the second wheel and attach it to the front section of the chassis of
the model you are building.
FRONT RIGHT WHEEL
11A Front right tyre
11B Rim (outer)
11C Tyre valve
11D Rim (inner)
11E Hub cover
11F Washer
HM Screw 2×3 mm (x 4)*
IM Screw 2×5×5 mm (x 2)*
* Some of the parts are spares.

42
11B
HM
11B
11A
11C
11B
STAGE 11
11.1
Take the outer part of the rim 11B. On the inside there is
a notch with a linchpin in the middle. Slide the tyre valve
11C onto the linchpin.
11.3
OnCe the two parts of the rim are aligned, insert three
type HM screws into the three holes in the outer part
11B, and tighten them to join the wheel parts together.
11.2
lOOk at the tyre 11A: on one side you
will see the word “outside” written and,
on the other, the word “inside”. Insert
the inner side of the rim 11D into the “inside” of the tyre,
and the outer rim 11D into the “outside” of the tyre. Then
put the inside rim 2H into the inside of the tyre. Make
sure the holes and mounting
linchpins are aligned.

43
11F
8J
11A
11B
STAGE 11
11.4
PlaCe the wheel onto piece 1 of the
front right spindle 8J.
11.5
inserT the washer 11F into the centre of the rim and
fix the wheel in place with a type IM screw. Don’t tighten
the screw too much as the wheel must be free to move.

44
11B
11E
STAGE 11
Both of the front wheels are now
mounted on the chassis of the model
you are building.
STAGE 11 FINAL RESULT
11.6
TOfinish mounting the wheel on the section of the chassis you have
built so far, press the hub cover 11E onto the middle of the rim 11B.

STAGE
45
These items are not toys; keep out of reach of children. The product is part of an assembly kit intended for an adult audience.
Assemble with the utmost care following the instructions in the attached manual; modifications or tampering are prohibited. Made in China. Read and keep for further reference.
GEAR BOX
12A
12D
12H
12E 12F 12G
12B 12C
AM AP CM
Publisher Note: the appearance of the parts shown on these pages may differ from that of the pieces included in this pack. This in no way affects the quality or assembly instructions.
PIECES FOR THIS STAGE
12
12A Gearbox crankcase, left side, piece 1
12B Gearbox crankcase, right side,
piece 1
12C Gearbox crankcase, left side, piece 2
12D Gearbox crankcase, right side,
piece 2
12E Gearbox oil pan
12F Bracket for gearbox oil pan
12G Starter motor, piece 1
12H Starter motor, piece 2
AM Screw 2×4 mm (x 10)*
AP Screw 1.7×4 mm (x 2)*
CM Screw 1.7×3 mm (x 3)*
In this assembly session, you will build the gearbox for your model.
ASSEMBLING
THE GEAR BOX
* Some of the parts are spares.

46
12E
12F AM
12A
12F
12E
AM
12C
12D
AM
STAGE 12
12.1
PuT the bracket 12F and the
gearbox oil pan 12E together,
ensuring that the pieces are facing
the same way as those in the illustration. To make
the assembly stable, use two type AM screws.
12.2
Take the left side, piece 1, of the gearbox
crankcase 12A and align the hole in its linchpin
with the transverse hole in the bracket 12F. Look at
the illustration carefully to ensure that the pieces are facing the right
way. Join with a type AM screw.
12.3
MOunT the left side, piece 2 12C onto
the right side, piece 2 12D. Join the two
pieces together by inserting two type AM
screws into piece 12C.

47
AM
12C
12A
AM
12A
12B
AP
12G
12H
STAGE 12
12.4
aTTaCh the left side, piece 2, of the gearbox crankcase 12C to
the left side, piece 1, 12A, as shown in the illustration. Join them
together with a type AM screw.
12.6
asseMble the two pieces of the starter motor
12H and 12G. Join them together with a type AP
screw.
12.5
nOw attach the right side, piece 1, 12B to what you
have just assembled. Use two type AM screws to make
the structure stable.

48
CM
12H
12A
STAGE
STAGE 12 FINAL RESULT
12
12.7
The sTarTer motor must be attached to the left side,
piece 1, of the gearbox 12A with two type CM screws.
Here’s the gearbox you
made in this assembly session.
Put it in a safe place until you
are ready to install it in the
model you are building.