De Agostini Fast & Furious Pack 18 User manual

18
pack

Pack 18
Stage 76
Rear body panels
Stage 77
Assembling the fuel cap
Stage 78
Rear left wheel arch
Stage 79
Rear right boot side panel
Stage 80
Rear right wheel arch
Editorial by: Milanoedit srl, milanoedit.com
Translation by: TperTradurre
Picture credits: NBCUniversal Archive
© 2019 Universal City Studios LLC.
Fast & Furious and all related marks and characters are trademarks
and copyrights of Universal Studios.
All Rights Reserved.
Dodge, HEMI and related logos, vehicle model names and trade
dress are trademarks of FCA US LLC and used under license by
Premium and Collectibles Trading Co. Ltd. ©2019 FCA US LLC.
© 2019 Editorial Planeta DeAgostini S.A.U.
Todos los derechos reservados.
© 2019 De Agostini Publishing Italia S.p.A.
Tutti i diritti riservati.
Warning: Not suitable for children under the age of 14.
This product is not a toy and is not designed or intended for use
in play.
Items may vary from those shown.

STAGE
301
These items are not toys; keep out of reach of children. The product is part of an assembly kit intended for an adult audience.
Assemble with the utmost care following the instructions in the attached manual; modifications or tampering are prohibited. Made in China. Read and keep for further reference.
76A 76B
PP
Publisher Note: the appearance of the parts shown on these pages may differ from that of the pieces included in this pack. This in no way affects the quality or assembly instructions.
PIECES FOR THIS STAGE
In this assembly session you will attach the rear left and right inner body panels. Follow our instructions
carefully, using the illustrations to help you.
76A Rear left inner panel 75B Rear right inner panel PP Screws 2x4x5 mm (x 12)*
CAR BODY
REAR BODY PANELS
76
*Some of the parts are spares.

302
76A
61A
61A PP
PP
76.1
Place the rear left inner panel 76A on the inside of the middle
section of the car body 61A, as shown in the illustration.
76.2
Secure the panel with five type PP screws,
inserted from the outside of the body.
STAGE 76

303
76.3
Now place the rear right inner panel 76B on the
middle section of the car body 61A.
A USEFUL TIP
Remember that before permanently joining two or more pieces, it is advisable to put them close to each other and
see just how they fit together, without forcing them unnecessarily.
This technique is also used by the best mechanics for real cars, as well as for the assembly of other products in
general. It is a useful procedure for parts that are screwed together or that simply press together, as it can be
difficult to separate them if they are not attached correctly.
61A
76B
STAGE 76

304
STAGE 76 FINAL RESULT
You have now mounted the rear left
and right inner body panels. Keep what
you have built so far in a safe place.
76.4
FiNally,secure the right panel 76B to the middle
section of the car body 61A with five type PP screws.
61A
PP
PP
STAGE 76

STAGE
305
These items are not toys; keep out of reach of children. The product is part of an assembly kit intended for an adult audience.
Assemble with the utmost care following the instructions in the attached manual; modifications or tampering are prohibited. Made in China. Read and keep for further reference.
Publisher Note: the appearance of the parts shown on these pages may differ from that of the pieces included in this pack. This in no way affects the quality or assembly instructions.
PIECES FOR THIS STAGE
In this assembly session you will be working on the fuel cap. Please follow our instructions and the
accompanying illustrations very carefully.
ASSEMBLING
THE FUEL CAP
77A Rear left parking light mount plate
77B Rear left parking light frame
77C Rear left parking light lens
77D Fuel cap
77E Fuel cap base
77F Fuel cap ring
RP Screws 1.2x5 mm (x 2)*
* Some of the parts are spares.
CAR BODY
77
77A 77D77B
77E
77C
77F RP

306
77.1
iNSert the tab on the fuel cap ring 77F into the corresponding slot
in the base 77E.
77E
77F
77D
77E
77F
77.2
turN the piece over and attach the fuel cap 77D, so
that the two protruding parts are either side of the tab
on the ring 77F.
STAGE 77

307
MAXIMUM ATTENTION TO DETAILS
Every single detail on the 1970 Dodge Charger R/T, the model Dominic Toretto drove in Fast and Furious, is a tiny work of art, for example this
shiny fuel cap on the left side of the car.
STAGE 77

308
STAGE 77 FINAL RESULT
You have now assembled the fuel cap.
Keep it in a safe place together with the
pieces you haven’t used yet.
A USEFUL TIP
Once you have finished this assembly session, check that the
fuel cap’s hinge has the same resistance when opening and
closing.
77.3
FiNally, secure the fuel cap 77D to the
completed base with a type RP screw.
77D
RP
STAGE 77

STAGE
309
These items are not toys; keep out of reach of children. The product is part of an assembly kit intended for an adult audience.
Assemble with the utmost care following the instructions in the attached manual; modifications or tampering are prohibited. Made in China. Read and keep for further reference.
Publisher Note: the appearance of the parts shown on these pages may differ from that of the pieces included in this pack. This in no way affects the quality or assembly instructions.
PIECES FOR THIS STAGE
In this assembly session you will attach the fuel cap and parking light to the rear left wheel arch of your model.
You will then attach the wheel arch to the car body.
THE REAR LEFT
WHEEL ARCH
78A Rear left wheel arch
AM Screws 2x4 mm (x 11)*
DM Screws 1.7x3x5 mm (x 3)*
AP Screws 1.7x4 mm (x 3)*
* Some of the parts are spares.
CAR BODY
78
78A
AM DM AP

310
78.1
Get the pieces from the last stage.
Insert the parking light frame 77B into the rear left
wheel arch 78A from the inside.
78.2
aGaiN from the inside, insert the lens 77C into
the frame. The interlocking elements mean that the
pieces only fit together in one way.
78.3
you are Now GoiNG to attach the parking light mount
plate 77A. Align the two holes and insert two type DM screws to
secure the plate to the wheel arch.
78.4
Place the fuel cap you assembled in the
last stage in its housing on the wheel arch
78A.
77B
78A
77C
78A
77A
DM
DM
77E
78A
STAGE 78

311
78.5
toSecure the fuel
tap to the wheel arch
78A, insert two type AP
screws from underneath.
78.6
uSiNG the linchpins, mount the
wheel arch 78A on the left side of the
car body.
AP
62A
61A
78A
STAGE 78

312
STAGE 78 FINAL RESULT
You have now attached the rear left
wheel arch, with the fuel cap and parking
light, to the car body.
78.7
Secure the wheel arch from the inside
using nine type AM screws.
AM
AM
AM
AM AM
AM
STAGE 78

STAGE
313
These items are not toys; keep out of reach of children. The product is part of an assembly kit intended for an adult audience.
Assemble with the utmost care following the instructions in the attached manual; modifications or tampering are prohibited. Made in China. Read and keep for further reference.
Publisher Note: the appearance of the parts shown on these pages may differ from that of the pieces included in this pack. This in no way affects the quality or assembly instructions.
PIECES FOR THIS STAGE
In this assembly session you will attach the rear right boot side panel to the car body.
Please follow our instructions and the accompanying illustrations very carefully.
THE REAR RIGHT
BOOT SIDE PANEL
79A Right boot side panel
79B Rear right parking light mount plate
79C Rear right parking light frame
79D Rear right parking light lens
SM Screws 2x4x5 mm (x 6)*
* Some of the parts are spares.
BOOT
79
79A
79B 79C 79D SM

314
STAGE 79
79.1
attach the rear right boot side panel 79A to the inside of the
right side of the car body (62A and 61A) by aligning the five
linchpins with the five corresponding holes in the car body.
61A
62A
79A

315
79A
62A
61A
SM
79A 62A
SM
SM
STAGE 79
79.2
Start securing the panel by inserting two type SM
screws in the holes at the back.
79.3
Now insert another two type SM screws from the outside
of the car body to secure the middle of the rear right boot
side panel 79A.

316
STAGE 79
STAGE 79 FINAL RESULT
You have now mounted the rear right
boot side panel. Keep any pieces you
haven’t used in a safe place.
79.4
FiNally,insert another type SM screw in the hole in the
middle section of the car body 61A, indicated in the
illustration.
61A
SM

STAGE
317
These items are not toys; keep out of reach of children. The product is part of an assembly kit intended for an adult audience.
Assemble with the utmost care following the instructions in the attached manual; modifications or tampering are prohibited. Made in China. Read and keep for further reference.
Publisher Note: the appearance of the parts shown on these pages may differ from that of the pieces included in this pack. This in no way affects the quality or assembly instructions.
PIECES FOR THIS STAGE
In this assembly session we will show you how to attach the rear right wheel arch to the body of your model.
Follow our instructions and the accompanying illustrations carefully.
THE REAR RIGHT
WHEEL ARCH
80A Rear right wheel arch
AM Screws 2x4 mm (x 11)*
DM Screws 1.7x3x5 mm (x 3)*
* Some of the parts are spares.
seRBATOiO e AlTOpARlAnTe CAR BODY
80
80A
AM
DM

318
80A
79C
79D
80A
79B
DM
80A
79C
80.1
Get the pieces from stage 79. Insert the parking light
frame 79C into the rear right wheel arch 80A from the
inside.
80.3
you are Now GoiNG to attach the
parking light mount plate 79B. Align the two holes and
insert two type DM screws to secure the plate to the
wheel arch.
80.2
aGaiN from the inside, insert the lens
79D into the frame. The interlocking
elements mean that the pieces only fit
together in one way.
STAGE 80