Decon wheel E-Walk MCG1121 User manual

2019-02-26
Assembly instructions for E-Walk on Next
MCG1121
1. Check that the Swing has the tree holes that are necessary.
Note! Only for Seat Width 45 and up.

2019-02-26
2. See pictures above for mounting the bracket on the right-side.
Parts for mounting set.
Item No. Part Number Qty Description
1 MCG1121R 1 Right bracket
2 MCG1121L 1 Left bracket
3 XSM8ML 4 Locknut M8
4 XSM8BR 4 Washer M8
5 MCG1121-06 2 Locking plate
3. Assemble the extended push handles.
Item No. Part Number Qty Description
1 380107 2 Extended push handles
2 8500 2 Rawl plug
3 MC6SM8X65 2 Screw M8 x 65
4 100 400 002 2 Spacer

2019-02-26
Center placed controller
When the controller is not directly placed on the push handle, then you can use one of the
placement bellow.
Side placed controller
There are different settings and adjustments with side
placed.
Note! Always use Loctite on screws when you assemble and adjust the controller.
WARNING!
Make sure that all moving part for the throttle is moving freely, otherwise the throttle
can jam or stuck an accent can occur.
4. Assemble the controller on the place that is best for you.