Decon wheel MEM6087P User manual

2022-09-22 1(3)
Assembly instructions for XLT 2008 Active, Dynamic, Swing
MEM6087P and MEM6088P
1. Remove wheel and hub sleeve on both sides.
2. Check the correct placement for the eMove, and that it is axle Ø12,0 x 51 with
Part Number: XOE-2530-BO and Spacer with Part Number: XOE-25383-00 and Stop
pins are assembled with Part Numbers: 320003.
9
10
8

2022-09-22 2(3)
3. Note the placing of the adapter plate, see picture.
Note! The brackets have placement opportunities.
4. Assembly the new plates (right side) according to picture.
Parts for right side mounting:
Item No. Part Number Qty Description
1 100 400 007 1 Spacer
2 XSM8X20 1 Screw Round M8 x 20
3 XSM8ML 1 Nut Self-Locking M8
4 HW063 1 Sleeve
5 405239 1 Nordlock Washer M16
6 XSM16M 1 Nut M16 low
7 310022 1 Bracket
8 320003 1 Stop Pin
9 XOE-25383-00 1 Spacer
10 93440-120520 1 Circlip
Note! If you only order the mounting set, the axle, axle spacer and the circlip are not
included, for replacement see the service manual.
5. Assemble the under placed battery bag.

2022-09-22 3(3)
Åtdragningsmoment / Tightening torque
Metriska grovgängor, stål.
Metric coarse threads, steel.
Gänga / Thread
Åtdragningsmoment / Tightening
torque
M3
1,2 Nm
M4
3 Nm
M5
6 Nm
M6
10 Nm
M8
25 Nm
M10
50 Nm
M12
85 Nm
Navhylsor.
Sleeves.
Gänga / Thread
Åtdragningsmoment / Tightening
torque
M16x1
30 Nm
M18x1
40 Nm