Sunrise Medical R-Net BLUETOOTH User manual

(Page 1 of 3)
Gu de to R-Net BLUETOOTH®
Enable Bluetooth Feature
1. Enter the User ettings Menu
a) Omni2 : Press and hold the Top Right oftkey
b) CJ M2: Press and hold the Top Left oftkey
2. croll down to Bluetooth and give a right command to enter the Menu
3. et one or more of the available devices to ON
4. For the Omni2 and CJ M2, scroll to the exit option at the bottom of the list.
5. Power the unit off and back on for your changes to take effect
PLEASE SEE THE DISCLAIMER INFORMATION PROVIDED ON THE LAST PAGE OF THIS DOCUMENT
Enter ng D scovery Mode
Once Bluetooth has been enabled, enter ng D scovery Mode
on the dev ce s done n the same way whether you are us ng a
Bluetooth Module or the CJSM2 or Omn 2 w th bu lt- n Bluetooth.
1. Turn the chair on and enter the Bluetooth Mode. elect the device you wish to pair with.
2. Deflect the joystick (or Omni2’s input device) forward and hold until you hear a beep, then
release. This will take approximately 10 seconds.
3. Deflect the joystick or input device in reverse and hold until you hear a beep, then release.
This will take approximately 10 seconds.
4. You are now in theDiscovery Mode. A flashing blue icon will confirm this if you are using
the CJ M2 or Omni2. If using a Bluetooth module, the blue light on the top of the module
will begin to blink.
CJ M2 Omni2
Power Button ettings Button
LCD creen
Mode Button
Profile Button
-
Button +
Button
Navigational Button

(Page 2 of 3)
Pa r ng w th W ndows PC
The following process should be undertaken on the Windows PC device:
1. Once the on-chair device has been placed in Discovery Mode:
Go to MY BLUETOOTH DEVICE on the PC
2. Click ADD to open the BLUETOOTH DEVICE WIZARD
3. Check the box marked MY DEVICE I READY TO BE FOUND then click NEXT
4. CLICK on the R-net Mouse 1/2 and click NEXT
5. If a passkey is requested, use 1234 for CJ M2 or Omni2. 0000 for Bluetooth modules
6. When the Bluetooth connection has been established click FINI H. The blue icon should
no longer be flashing once the device has been paired.
If the comp ter does NOT have integrated Bl etooth, a receiver will be req ired.
PG Drives recommends the following Bluetooth dongles:
• Trust BT-2400
• Linksys U BBT100-UK
• Belkin F8T012uk1 Version 1000
Pa r ng w th Andro d
The following process should be undertaken on the Android device:
1. Once the on-chair device has been placed in Discovery Mode:
Go to ETTING on the Android device and enable BLUETOOTH
2. elect R-net Mouse 1 (or 2) from the list of available devices.
3. Enter the password ‘PGDT’ if prompted on the screen.
(this is only required the first time the device is connected)
4. Open the R-net for Android App and select ‘Connect’. This will present a list of available
Bluetooth devices.
5. elect R-net Mouse 1 (or 2) from the list of available devices.
6. Enter the password ’1234’ when prompted on the screen for CJ M2 or Omni2.
0000 for Bluetooth modules
7. R-net Mouse 1 (or 2) should appear as a paired device. In addition, the blue icon on the
CJ M2-BT should stop flashing.

(Page 3 of 3)
Sunrise Medica (US) LLC, Fresno, CA 93727
MK-129542 Rev. A ©09.2019800.333.4000 www.SunriseMedica.com/EIM
DISCLAIMER: FOR PROFESSIONAL USE ONLY. THIS DOCUMENT (AND THE WEBSITE REFERENCED HEREIN) DO NOT PROVIDE MEDICAL ADVICE.
Sunrise Medical (US) LLC does not provide clinician services. The in ormation contained on this document (and the website re erenced herein), including, but not
limited to, the text, graphics, images, and descriptions, are or in ormational purposes only and should be utilized as a general resource or clinicians and suppliers
to then use clinical reasoning skills to determine optimal seating and mobility solutions or individual patients. No material on this document (or on the website) is
intended to be used as (or a substitute or) pro essional medical advice, diagnosis or treatment. Clinicians should adhere to their pro essional medical training and
their institutionʼs or practiceʼs recommended guidelines. Reliance on this document (and the in ormation contained herein) is solely at your own risk.
Pa r ng w th OS dev ces
The following process should be undertaken:
1. elect ettings and set Bluetooth to On.
2. elect R-net iDevice 1 (or 2) from the list of available devices.
3. R-net iDevice should appear as a paired device. In addition, the blue icon should stop flashing.
You are now connected.
4. For iDevices, additional steps need to be taken to set up switch accessibility & switch
operation on the iO device.
• Detailed instructions are available in the R-net CJ M2 or Omni2 Technical Manual for iDevice
switch set up.