Decon wheel eMove MEM6003-30+ User manual

2023-11-03
Assembly instruction New eMove for Panthera Typ 30+ with raised rear axle
MEM6003-30+ and MEM6004-30+
1. Remove the wheel on both sides.
2. Check the correct placement for the eMove, for arear axle with +10, +20, +30 and +40
see pictures above, and that it is mounted Ø12,7 x 46 axle with Part Number: XOE-
2530E-00.
3. Check the correct placement for the eMove, for arear axle with
+50 och +60 see pictures above, and that it is mounted Ø12,7 x 46
axle with Part Number: XOE-2530E-00.

2023-11-03
4. Mount the bracket depending on with model you have.
5. Assembly the plate (right side) according to pictures above.
Parts for right side mounting:
Item No. Part Number Qty Description
1 300020 1 Bracket
2 100 400 001 1 Spacer*(only +1,5 Rear axle)
3 290010 1 Clamp
4 300036 1 Right Bracket
5 XSM8X50 1 Screw M8 x 50
6 XSM8BR 2 Plain Washer M8
7 XSM8ML 2 Locknut M8
8 XSM8X20 1 Screw M8 x 20
*If you do not now with rear axle you have, see the link bellow.
http://www.panthera.se/panthera/documentation/montering/eng/montering_bakaxel_kolfiber_eng.pdf
Note! If you only order the mounting set, the axle it’s not included, for
replacement see the service manual.
+1,5 Bakaxel
Note!
If you do not have a +1,5 Rear axle,
the spacer with position 2 is not
included in the assembly.

2023-11-03
Assembly instruction Type 30 with raisers +10
Assembly instruction Type 30 with raisers +20
Assembly instruction Type 30 with raisers +30
Assembly instruction Type 30 with raisers +40

2023-11-03
Assembly instruction Type 30 with raisers +50
Assembly instruction Type 30 with raisers +60

2023-11-03
6. Assemble the under placed battery bag or if have order a Lithium battery place the
battery holder as the picture bellow
MEM5014
1 MEM5002 1
2 MEM5003 4
3 XSFM5X12 2
4 XSM5ML 2
5 XSSM8X16 4
6 XSM8ML 4
7 MED5001 1
8 XSFM6X12 4
9 XSM6ML 4
10 MEM5011 1
11 MEM5004 2
Note! Bambino is not included.
7. Adjust the parkering brake.

2023-11-03
M3
1,2 Nm
M4
3 Nm
M5
6 Nm
M6
10 Nm
M8
25 Nm
M10
50 Nm
M12
85 Nm
M16x1
30 Nm
M18x1
40 Nm