Decon wheel Panthera Bambino MED3130 User manual

2020-04-21
Page 1
Assembly instructions for Panthera Bambino
MED3130
1. Remove wheels and brakes if that are any.
2. Check the correct placement for the stop pin and that the anti-tip devices are removed.
Use original anti-tip devices on the wheelchair.

2020-04-21
Page 2
3. Assembly the plate (right side) according to picture.
Parts pair mounting set:
Item No. Part Number Qty Description
1 290010 1 Clamp
2 100 400 005 1 Spacer
3 MED2004 1 Bracket
4 405239 1 Nordlock Washer M16
5 HW069 1 Hubsleever M16x1/12,7
6 XSM8X50 1 Screw Round M8 x 50
7 XSM8ML 1 Nut Self-Locking M8
8 100 400 003 1 Spacer
9 100 400 017 1 Spacer
4. Assemble the under placed battery bag.

2020-04-21
Page 3
MED1366
Joystick Assembly
Item No. Part Number Qty Description
1 XOC-48160-B0 1 Upper holder assembly 2
2 XOC-46295-00 1 Sheet Metal Bracket
3 XSM6X16 2 Screw M6 x 16
4 XSM6ML 3 Locknut M6
5 XSM6X25 2 Screw M6 x 25
6 XSM6BR 2 Plain Washer M6
7 MED1501 Rev4 1 Bracket
5. Assemble the Joystick with the bracket onto the armrest with side cover.

2020-04-21
Page 4
MED1407
Attendant control with Joystick controller
Item No. Part Number Qty Description
1 MED1317 1 Bracket
2 XSM6X35 1 Screw M6 x 35
3 XSM6BR 3 Plain Washer M6
4 XSM6ML 3 Locknut M6
5 XSM6X16 2 Screw M6 x 16
6 290010 1 Clamp 19 mm
7 MED1316 1 Plate with pin
6. Assemble the Attendant control with the Joystick control on any side. If you change
side you must move (A) to the other side.
A

2020-04-21
Page 5
MED1219
Attendant control with attendant controller (only right side)
7. For the attendant control unit, you need these parts.
Item No Part Number Qty Description
1 XSM6BRTG 1 Torn washer
2 290010 1 Clamp 19 mm
3 XSM6X35 1 Screw M6 x 35
4 XSM6XBR 1 Plain Washer

2020-04-21
Page 6
Åtdragningsmoment / Tightening torque
Metriska grovgängor, stål.
Metric coarse threads, steel.
Gänga / Thread
Åtdragningsmoment / Tightening torque
M3
1,2 Nm
M4
3 Nm
M5
6 Nm
M6
10 Nm
M8
25 Nm
M10
50 Nm
M12
85 Nm
Navhylsor.
Sleeves.
Gänga / Thread
Åtdragningsmoment / Tightening torque
M16x1
30 Nm
M18x1
40 Nm