Decon wheel Canto User manual

2020-06-23
Assembly instructions for Canto, Canto Nxt
MED3017
1. Remove wheels on both sides.
2. Check the correct placement for the stop pin and that the anti-tip devices are removed.

2020-06-23
3. Assembly the plate (right side) according to picture.
Parts pair mountingset:
Item No. Part Number Qty Description
1 100 500 100 1 Bracket
2 HW069 1 Hubsleever E-drive
3 100 400 006 1 Spacer
4 100 400 007 1 Spacer
5 100 400 002 1 Spacer
6 XSM16M 1 Nut M16X1 Low
7 XSM8X35 1 Screw M8 x 35
8 XSM8ML 1 Lock Nut M8
9 405239 1 Nordlock Washer M16
10 XSM16FJ 1 Single Coil Washer M16
11 00876-08-00 1 Washer 8,4x21x4 DIN7349
12 MED2000 1 Bracket
13 100 400 017 1 Spacer

2020-06-23
Joystick Control
Item No. Part Number Qty Description
1 XOC-48160-B0 1 Upper holder assembly 2
2 MED3070-01 Rev2 1 Bracket

2020-06-23
Attendant Control
MED1250
Item No. Part Number Qty Description
1 XSM6X30 2 Screw Round M6,x 30
2 XSM6ML 1 Nut Self-Locking M6
3 MCG1151-18 2 Handle Bracket 3
4 XSM6BRTG 1 Thorn Washer M6
4. Assemble the back placed battery bag.

2020-06-23
Åtdragningsmoment / Tightening torque
Metriska grovgängor, stål.
Metric coarse threads, steel.
Gänga / Thread
Åtdragningsmoment / Tightening torque
M3
1,2 Nm
M4
3 Nm
M5
6 Nm
M6
10 Nm
M8
25 Nm
M10
50 Nm
M12
85 Nm
Navhylsor.
Sleeves.
Gänga / Thread
Åtdragningsmoment / Tightening torque
M16x1
30 Nm
M18x1
40 Nm