Decon wheel Helium User manual

2021-02-02
Assembly instructions for Helium and Nitrum
With 0° Camber
MEM6137P and MEM6138P
1. Remove wheels and sleeves.
2. Check the correct placement for the eMove and assemble with
axle Ø12,7-46 with part number: X0E-2530E-00.
Stop pins are assembled with Part Numbers: 290000, 300001 and XSM8ML.
5
6
7
Only STD rear axle.
Not PRO rear axle or
short COG rear axle.

2021-02-02
3. Assemble the plate (right side) according to picture.
Parts for right side mounting:
Item No. Part Number Qty Description
1 HW072 1 Hub sleeve
2 XSTM6X12 1 Stop Screw M6 x 12
3 XSM8X16 1 Screw : Round - M8 x 16
4 310031 1 Bracket
5 290000 1 Bracket
6 300001 1 Pin
7 XSM8ML 1 Lock nut M8
Note! If you only order the mounting set, the axle it’s not included, for replacement see
the service manual.

2021-02-02
4. Assemble the under placed battery bag or if have order a Lithium battery place the
battery holder as the picture bellow.
Assembly of Battery bracket
MEM5015
Item No. Part Number Qty Description
1 MEM5002 1 Hoop
2 MEM5003 4 Clamp
3 XSFM5X12 2 Screw Countersunk M5 x12
4 XSM5ML 2 Nut Self-Locking M5
5 XSSM8X16 4 Bolt Round-Square M8 x16
6 XSM8ML 4 Nut Self-Locking M8
7 MED5001 Rev3 1 Battery plate eDrive/ eMove
8 XSFM6X16 4 Screw Countersunk M6 x16
9 XSM6ML 4 Nut Self-Locking M6
10 MEM5011 1 Bracket

2021-02-02
Åtdragningsmoment / Tightening torque
Metriska grovgängor, stål.
Metric coarse threads, steel.
Gänga / Thread
Åtdragningsmoment / Tightening torque
M3
1,2 Nm
M4
3 Nm
M5
6 Nm
M6
10 Nm
M8
25 Nm
M10
50 Nm
M12
85 Nm
Navhylsor.
Hubsleever.
Gänga / Thread
Åtdragningsmoment / Tightening torque
M16x1
30 Nm
M18x1
40 Nm