Decon wheel Exello Edge MEM6439P User manual

2021-07-14
Assembly instructions for Exello Edge
MEM6439P and MEM6440P
1. Remove wheels and sleeves on both sides.
2.
3. Check the correct placement for the eMove, and that it is axle Ø12,7 x 51 with
Part Number: XOE-2530E-C0 without axle spacer and Stop pins are assembled
with Part Number: 320003.
7
9

2021-07-14
4. Assembly of the plate according to picture.
Remember to use thread lock on all screws and the sleeves.
Parts for right side mounting:
ITEM PART NUMBER QTY DESCRIPTION
1 HW096 1 Sleeve
2 310031 1 Bracket
3 405241 1 Nordlock Washer
4 100 400 016 1 Spacer
5 340007 1 Clamp
6 340008 1 Clamp
7 XSM8X50 2 Screw M8 x 50
8 XSM8X16 1 Screw M8 x 16
9 320003 1 Bracket
Note! If you only order the mounting set, the axle is not included, for replacement see the
service manual.
5. Assemble the back placed battery bag.
Note!
If you want to use original wheel you must order new QR-Axles with
Part Number: QR1275

2021-07-14
Åtdragningsmoment / Tightening torque
Metriska grovgängor, stål.
Metric coarse threads, steel.
Gänga / Thread
Åtdragningsmoment / Tightening torque
M3
1,2 Nm
M4
3 Nm
M5
6 Nm
M6
10 Nm
M8
25 Nm
M10
50 Nm
M12
85 Nm
Navhylsa.
Sleeve.
Gänga / Thread
Åtdragningsmoment / Tightening torque
M16x1
30 Nm
M18x1
40 Nm