DEEP SEA ELECTRONICS DSE4510 MKII User manual

Configuration Parameters –Module (Page 1)
101
Contrast
0 (%)
121
Generator Voltage Display
On (1), Off (0)
102
Fast Loading Enabled
On (1), Off (0)
122
Mains Voltage Display
On (1), Off (0)
103
All Warnings Latched
On (1), Off (0)
123
Generator Frequency Display
On (1), Off (0)
104
Lamp Test at Startup
On (1), Off (0)
124
Mains Frequency Display
On (1), Off (0)
105
Power Save Mode Enable
On (1), Off (0)
125
Current Display
On (1), Off (0)
106
Deep Sleep Mode Enable
On (1), Off (0)
126
kW Display
On (1), Off (0)
107
Protected Start Enable
On (1), Off (0)
127
kvar Display
On (1), Off (0)
108
Event Log Display Format
On (1), Off (0)
128
kVA Display
On (1), Off (0)
109
Power Up Mode
0 (Power Up Mode)
129
pf Display
On (1), Off (0)
110
DTC String Enable
On (1), Off (0)
130
kWh Display
On (1), Off (0)
111
RESERVED
131
kvarh Display
On (1), Off (0)
112
Pin Protected Maintenance
Reset
On (1), Off (0)
132
kVAh Display
On (1), Off (0)
113
Stop Button Cooldown
On (1), Off (0)
133
RESERVED
114
Use Module Oil Pressure
On (1), Off (0)
134
Show Load Switching Icons
On (1), Off (0)
115
Use Module Coolant Temp
On (1), Off (0)
135
Backlight Inactivity Timer
On (1), Off (0)
116
Use Module Engine Hours
On (1), Off (0)
136
ECU Periodic Wake Up
On (1), Off (0)
117
Use Module RPM
On (1), Off (0)
137
Coolant Temp Persistence
On (1), Off (0)
118
Use Module Charge Alt
On (1), Off (0)
138
Limit Audible Alarm Duration
On (1), Off (0)
119
Disable CAN Speed Control
On (1), Off (0)
139
Transducer Power Supply
On (1), Off (0)
120
CT Position
Gen (0), Load (1)
140
English Text Mode
On (1), Off (0)
Configuration Parameters –CAN Application (Page 2)
201
CAN Alternative Engine Speed
On (1), Off (0)
203
CAN ECU Data Fail Action
0 (Action)
202
CAN ECU Data Fail Arming
0 (Arming)
204
CAN ECU Data Fail Delay
0 s
Configuration Parameters –Digital Inputs (Page 3)
301
Digital Input A Source
0 (Input Source)
302
Digital Input A Polarity
0 (Polarity)
303
Digital Input A Action (If Source = User Config)
0 (Action)
304
Digital Input A Arming (If Source = User Config)
0 (Arming)
305
Digital Input A Activation Delay (If Source = User Config)
0 s
306
Digital Input B Source
0 (Input Source)
307
Digital Input B Polarity
0 (Polarity)
308
Digital Input B Action (If Source = User Config)
0 (Action)
309
Digital Input B Arming (If Source = User Config)
0 (Arming)
310
Digital Input B Activation Delay (If Source = User Config)
0 s
311
Digital Input C Source
0 (Input Source)
312
Digital Input C Polarity
0 (Polarity)
313
Digital Input C Action (If Source = User Config)
0 (Action)
314
Digital Input C Arming (If Source = User Config)
0 (Arming)
315
Digital Input C Activation Delay (If Source = User Config)
0 s
316
Digital Input D Source
0 (Input Source)
317
Digital Input D Polarity
0 (Polarity)
318
Digital Input D Action (If Source = User Config)
0 (Action)
319
Digital Input D Arming (If Source = User Config)
0 (Arming)
320
Digital Input D Activation Delay (If Source = User Config)
0 s
Configuration Parameters –Outputs (Page 4)
401
Digital Output A Source
0 (Output Source)
407
Digital Output D Source
0 (Output Source)
402
Digital Output A Polarity
0 (Output Polarity)
408
Digital Output D Polarity
0 (Output Polarity)
403
Digital Output B Source
0 (Output Source)
409
Digital Output E Source
0 (Output Source)
404
Digital Output B Polarity
0 (Output Polarity)
410
Digital Output E Polarity
0 (Output Polarity)
405
Digital Output C Source
0 (Output Source)
411
Digital Output F Source
0 (Output Source)
406
Digital Output C Polarity
0 (Output Polarity)
412
Digital Output F Polarity
0 (Output Polarity)
Configuration Parameters –Timers (Page 5)
501
Mains Transient Delay
513
ETS Solenoid Hold
525
Page Delay
502
Start Delay
514
Failed to Stop Delay
526
Cooling Time at Idle
503
Preheat Timer
515
Generator Transient Delay
527
Backlight Power Save Delay
504
Crank Time
516
Transfer Delay
528
Audible Alarm Timer
505
Crank Rest Time
517
Breaker Trip Pulse
529
Fuel Pull in Coil Duration
506
Smoke Limiting
518
Breaker Close Pulse
530
ECU Override Time
507
Smoke Limiting Off
519
Delayed Load Output 1
531
ECU Periodic Wakeup Period
508
DPF Ramp
520
Delayed Load Output 2
532
Post-Heat Timer
509
Safety On Delay
521
Delayed Load Output 3
533
Delay Crank Timer
510
Warm Up Time
522
Delayed Load Output 4
534
Max Star Pause Timer
511
Return Delay
523
Power Save Mode Delay
512
Cooling Time
524
Deep Sleep Mode Delay
Digital Input Polarity
Output Polarity
Alarm Action
Index
Polarity
Index
Polarity
Index
Action
0
Close to Activate
0
Energise
0
Electrical Trip
1
Open to Activate
1
De-Energise
1
Shutdown
2
Warning
AC System
Digital Input Alarm Arming
Power Up Mode
Index
Type
Index
Arming
Index
Mode
0
2 Phase 3 Wire (L1-L3)
0
Always
0
Stop
1
2 Phase 3 Wire (L1-L2)
1
From Safety On
1
Manual
2
3 Phase 3 Wire
2
From Starting
2
Auto
3
3 Phase 4 Wire
3
Never
4
3 Phase 4 Wire (Delta)
5
Single Phase 2 Wire
Functionality in DSE4510 MKII & DSE4520 MKII
Functionality in DSE4520 MKII only.
Configuration Parameters –Generator (Page 6)
601
Alternator Fitted
On (1), Off (0)
622
Over Frequency Warning Trip
0.0 Hz
602
Alternator Poles
0
623
Over Frequency Shutdown
Enable
On (1), Off (0)
603
Under Voltage Shutdown
Enable
On (1), Off (0)
624
Over Frequency Shutdown Trip
0.0 Hz
604
Under Voltage Trip Shutdown
0 V
625
Generator AC System
0 (AC
System)
605
Under Voltage Warning Enable
On (1), Off (0)
626
CT Primary
0 A
606
Under Voltage Warning Trip
0 V
627
CT Secondary
1 A, 5 A
607
RESERVED
628
Full Load Rating
0 A
608
Loading Voltage
0 V
629
Immediate Over Current Enable
On (1), Off (0)
609
Over Voltage Warning Enable
On (1), Off (0)
630
Delayed Over Current Alarm
Enable
On (1), Off (0)
610
Over Voltage Warning Return
0 V
631
Delayed Over Current Alarm
Action
0 (Action)
611
Over Voltage Warning Trip
0 V
632
Over Current Delay Time
0 s
612
Over Voltage Shutdown Trip
0 V
633
Over Current Trip
0 %
613
Under Frequency Shutdown
Enable
On (1), Off (0)
634
kW Rating
0 kW
614
Under Frequency Shutdown Trip
0.0 Hz
635
Over kW Protection Enable
On (1), Off (0)
615
Under Frequency Warning
Enable
On (1), Off (0)
636
Over kW Protection Action
0 (Action)
616
Under Frequency Warning Trip
0.0 Hz
637
Over kW Protection Trip
0 %
617
RESERVED
638
Over kW Protection Trip Delay
0 s
618
Loading Frequency
0.0 Hz
639
Enable CT Support
On (1), Off (0)
619
Nominal Frequency
0.0 Hz
640
Over kW Protection Return
0 %
620
Over Frequency Warning
Enable
On (1), Off (0)
641
Nominal Voltage
0 V
621
Over Frequency Warning Return
0.0 Hz
Configuration Parameters –Mains (Page 7)
701
Mains AC System
0 (AC System)
709
Over Voltage Level Trip
0 V
702
Mains Failure Detection
On (1), Off (0)
710
Under Frequency Enable
On (1), Off (0)
703
Immediate Mains Dropout
On (1), Off (0)
711
Under Frequency Trip
0.0 Hz
704
Under Voltage Enable
On (1), Off (0)
712
Under Frequency Return
0.0 Hz
705
Under Voltage Level
0 V
713
Over Frequency Enable
On (1), Off (0)
706
Under Voltage Return
0 V
714
Over Frequency Return
0 Hz
707
Over Voltage Enable
On (1), Off (0)
715
Over Frequency Trip
0.0 Hz
708
Over Voltage Return
0 V
Configuration Parameters –Engine (Page 8)
801
Start Attempts
0
832
Start on Low Battery
Engine Run Duration
0 s
802
Over Speed Overshoot
0 %
833
RESERVED
803
Over Speed Delay
0 s
834
RESERVED
804
Gas Choke Timer
(Gas Engine Only)
0 s
835
J1939-75 Instruments Enable
On (1), Off (0)
805
Gas On Delay
(Gas Engine Only)
0 s
836
J1939-75 Alarms Enable
On (1), Off (0)
806
Gas Ignition Off Delay
(Gas Engine Only)
0 s
837
Engine CAN Source Address
0
807
Crank Disconnect On Oil
Pressure Enable
On (1), Off (0)
838
Instrumentation CAN Source
Address
0
808
Check Oil Pressure Prior to
Starting
On (1), Off (0)
839
RESERVED
809
Crank Disconnect On Oil
0.00 Bar
840
Tier 4 Home Screen Enable
On (1), Off (0)
810
Crank Disconnect On
Frequency
0.0 Hz
841
Start Pause Time
0 s
811
Crank Disconnect On Engine
Speed
0 RPM
842
Preheat Enable
On (1), Off (0)
812
Under Speed Enable
On (1), Off (0)
843
Preheat Temperature
0 °C
813
Under Speed Trip
0 RPM
844
Post-heat Enabled
On (1), Off (0)
814
Over Speed Trip
0 RPM
845
Post-heat Temperature
0 °C
815
Low Battery Voltage Enable
On (1), Off (0)
846
Coolant Heater Enabled
On (1), Off (0)
816
Low Battery Voltage Warning
0.0 V
847
Coolant Heater On Temp
0 °C
817
Low Battery Voltage Return
0.0 V
848
Coolant Heater Off Temp
0 °C
818
Low Battery Voltage Delay
0:00:00
849
Coolant Cooler Enabled
On (1), Off (0)
819
High Battery Voltage Enable
On (1), Off (0)
850
Coolant Cooler On Temp
0 °C
820
High Battery Voltage Return
0.0 V
851
Coolant Cooler Off Temp
0 °C
821
High Battery Voltage Warning
0.0 V
852
RESERVED
822
High Battery Voltage Warning
Delay
0 s
853
Tank Bund Level High Alarm
0 (Action)
823
Charge Alt Shutdown Enable
On (1), Off (0)
854
Fan Speed Low Arming
0 (Arming)
824
Charge Alt Shutdown Trip
0.0 V
855
Fan Speed Low Action
0 (Action)
825
Charge Alt Shutdown Delay
0 s
856
Fan Speed Low Delay
0 s
826
Charge Alt Warning Enable
On (1), Off (0)
857
Fuel Low Switch Arming
0 (Arming)
827
Charge Alt Warning Trip
0.0 V
858
Fuel Low Switch Action
0 (Action)
828
Charge Alt Warning Delay
0 s
859
Fuel Low Switch Activation
Delay
0 s
829
Start on Low Battery Enable
On (1), Off (0)
860
Crank Disconnect on Charge
Alt Enable
On (1), Off (0)
830
Start on Low Battery Threshold
0.0 V
861
Crank Disconnect on Charge
Alt Voltage
0.0 V
831
Start on Low Battery Start Delay
0 s
Configuration Parameters –Analogue Inputs (Page 9)
901-902
RESERVED
903
Low Oil Pressure Enable
On (1), Off (0)
904
Low Oil Pressure Trip
0 Bar
905
Oil Pressure Sensor Open Circuit
On (1), Off (0)
906-907
RESERVED
908
High Engine Temperature Trip
0.00 °C
909
Temperature Sensor Open Circuit
On (1), Off (0)
910-929
RESERVED
930
Fuel Sensor C Low Alarm Action
Shutdown (2), Electrical Trip (1), Disabled (0)
931
Fuel Sensor C Low Shutdown Trip
0 %
932
Fuel Sensor C Low Shutdown Delay
0 s
933
Fuel Sensor C Low Pre-Alarm Enable
On (1), Off (0)
934
Fuel Sensor C Low Pre-Alarm Trip
0 %
935
Fuel Sensor C Low Pre-Alarm Return
0 %
936
Fuel Sensor C Low Pre-Alarm Delay
0 s
937
Fuel Sensor C High Pre-Alarm Enable
On (1), Off (0)
938
Fuel Sensor C High Pre-Alarm Return
0 %
939
Fuel Sensor C High Pre-Alarm Trip
0 %
940
Fuel Sensor C High Pre Alarm Delay
0 s
941
RESERVED
942
Fuel Sensor C High Alarm Action
Shutdown (2), Electrical Trip (1), Disabled (0)
943
Fuel Sensor C High Alarm Trip
0 %
944
Fuel Sensor C High Alarm Delay
0 s
945-967
RESERVED
968
Fuel Usage Alarm (Run) Arming
On (1), Off (0)
969
Fuel Usage Alarm (Run) Action
0 (Action)
970
Fuel Usage Alarm (Run) Trip
0 %
971
Fuel Usage Alarm (Run) Return
0 %
972
Fuel Usage Alarm (Stopped) Arming
0 (Arming)
973
Fuel Usage Alarm (Stopped) Action
0 (Action)
974
Fuel Usage Alarm (Stopped) Trip
0 %
975
Fuel Usage Alarm (Stopped) Return
0 %
976
Low Coolant Level Arming
0 (Arming)
977
Low Coolant Level Action
0 (Action)
978
Low Coolant Level Trip
0 %
979
Low Coolant Level Return
0 %
980
Low Coolant Level Delay
00:00:00
981
Low Coolant Level Open Circuit Arming
On (1), Off (0)
982
Low Coolant Level Switch Arming
0 (Arming)
983
Low Coolant Level Switch Action
0 (Action)
984
Low Coolant Level Switch Delay
00:00:00
985
High Engine Temp Pre-Alarm Enable
On (1), Off (0)
986
High Engine Temp Pre-Alarm Return
0.00 °C
987
High Engine Temp Pre-Alarm Trip
0.00 °C
Configuration Parameters –Scheduler (Page 10)
1001
Enable Scheduler
On (1), Off (0)
1002
Schedule Run On or Off Load
On (1), Off (0)
1003
Scheduler Period
Weekly (0), Monthly (1)
1004, 1008, 1012, 1016, 1020, 1024, 1028, 1032
Start Time (Entry 1-8)
0:00:00
1005, 1009, 1013, 1017, 1021, 1025, 1029, 1033
Day (Entry 1-8)
0 (1=Monday)
1006, 1010, 1014, 1018, 1022, 1026, 1030, 1034
Week (Entry 1-8)
1, 2, 3 or 4
1007, 1011, 1015, 1019, 1023, 1027, 1031, 1035
Duration (Entry 1-8)
0 s
Configuration Parameters –Time (Page 11)
1101
Time of Day
0:00:00
1104
Day of Month
1-31
1102
RESERVED
1105
Month of Year
1-12
1103
RESERVED
1106
Year
0-99
Configuration Parameters –Maintenance Alarms (Page 12)
1201
Oil Maintenance Alarm Enable
On (1), Off (0)
1206
Air Maintenance Alarm Engine
Hours
0 h
1202
Oil Maintenance Alarm Action
0 (Action)
1207
Fuel Maintenance Alarm
Enable
On (1), Off (0)
1203
Oil Maintenance Alarm Engine
Hours
0 h
1208
Fuel Maintenance Alarm Action
0 (Action)
1204
Air Maintenance Alarm Enable
On (1), Off (0)
1209
Fuel Maintenance Alarm
Engine Hours
0 h
1205
Air Maintenance Alarm Action
0 (Action)
Configuration Parameters –Alternate Configuration 1 (Page 20)
2001-2057
Refer to the DSE Publication 057-260 DSE4510 MKII & DSE4520MKII Operators Manual for
configuration parameters.
Configuration Parameters –Alternate Configuration 2 (Page 30)
3002-3057
Refer to the DSE Publication 057-260 DSE4510 MKII & DSE4520MKII Operators Manual for
configuration parameters.
Configuration Parameters –Alternate Configuration 3 (Page 40)
4002-4057
Refer to the DSE Publication 057-260 DSE4510 MKII & DSE4520MKII Operators Manual for
configuration parameters.

Input Sources
0
User Configured
17
Mains Load Inhibit
41
Alternative Configuration 2
1
Remote Start on Load
18
RESERVED
42
Alternative Configuration 3
2
RESERVED
19
External Panel Lock
43
Emergency Stop
3
Auto Start Inhibit
20
Auxiliary Mains Fail
44
RESERVED
4
Lamp Test
21
Oil Pressure Switch
45
Maintenance Reset Oil
5
Alarm Mute
22
Coolant Temperature Switch
46
Maintenance Reset Air
6
Alarm Reset
23
RESERVED
47
Maintenance Reset Fuel
7
RESERVED
24
Simulate Mains Available
48
RESERVED
8
Simulate Start Button
25
Remote Start Off Load
49
RESERVED
9
Simulate Stop Button
26-30
RESERVED
50
DPF Auto Regen Inhibit
10
RESERVED
31
Auto Restore Inhibit
51
DPF Force Regeneration
11
Simulate Auto Button
32
RESERVED
52
DPF Regeneration
Interlock
12
RESERVED
33
Low Fuel Level Switch
53
Water in Fuel
13
Close Generator
Open Mains
34
Smoke Limiting
54
Fuel Bund Level High
14
Generator Load Inhibit
35-38
RESERVED
55
Fan Speed Low
15
RESERVED
39
Main Configuration
56
Low Coolant Level Switch
16
Close Mains
Open Generator
40
Alternative Configuration 1
57
Wait To Start
Output Sources
0
Not Used
46
Mains Low Frequency
92
RESERVED
1
Air Flap Relay
47
Mains Low Voltage
93
RESERVED
2
Audible Alarm
48
Oil Pressure Sensor Open Circuit
94
RESERVED
3
Battery High Volts Warning
49
Open Generator Output
95
Over Speed Overshoot Alarm
4
Battery Low Volts Warning
50
Open Generator Output Pulse
96
Over Frequency Overshoot Alarm
5
CAN ECU Data Fail
51
Open Mains Output
97
Display Heater Fitted and Active
6
ECU (ECM) Warning
52
Open Mains Output Pulse
98
RESERVED
7
ECU (ECM) Shutdown
53
Over Frequency Shutdown
99
SCR Inducement
8
CAN ECU Power
54
Over Speed Shutdown
100
DEF Level Low
9
CAN ECU Stop
55
Preheat During Preheat Timer
101
DPF Auto Regeneration Inhibit
10
Charge Alternator Shutdown
56
Preheat Until End of Crank
102
DPF Forced Regeneration
11
Charge Alternator Warning
57
Preheat Until End of Safety Timer
103
DPF None Mission State
12
Close Generator Output
58
Preheat Until End of Warming
104
DPF Regeneration in Progress
13
Close Generator Output
Pulse
59
Smoke Limiting
105
DPF Regen Interlock Active
14
Close Mains Output
60
Start Relay
106
DPTC Filter
15
Close Mains Output Pulse
61
Temperature Sensor Open Circuit
107
HEST Active
16
Combined Mains Failure
62
Under Frequency Shutdown
108
Water in Fuel
17
Common Alarm
63
Under Speed Shutdown
109
Fuel Pull in Coil
18
Common Electrical Trip
64
Waiting for Manual Restore
110
Generator at Rest
19
Common Shutdown
65
Flexible Sensor C High Alarm
111
Fuel Tank Bund Level High
20
Common Warning
66
Flexible Sensor C High Pre-Alarm
112
ECU Preheat
21
Cooling Down
67
Flexible Sensor C Low Pre-Alarm
113
Water Heater
22
Digital Input A
68
Flexible Sensor C Low Alarm
114
Water Cooler
23
Digital Input B
69
RESERVED
115
Closed to Gen
24
Digital Input C
70
RESERVED
116
Closed to Mains
25
Digital Input D
71
RESERVED
117
Generator Under Frequency
Warning
26
RESERVED
72
RESERVED
118
Generator Over Frequency
Warning
27
RESERVED
73
Fuel Sensor High Alarm
119
Generator Low Voltage Warning
28
RESERVED
74
Fuel Sensor High Pre-Alarm
120
Generator High Voltage Warning
29
Emergency Stop
75
Fuel Sensor Low Pre-Alarm
121
Main Config Selected
30
Energise to Stop
76
Fuel Sensor Low Alarm
122
Alt Config 1 Selected
31
Fail to Start
77
Delayed Load Output 1
123
Alt Config 2 Selected
32
Fail to Stop
78
Delayed Load Output 2
124
Alt Config 3 Selected
33
Fuel Relay
79
Delayed Load Output 3
125
Flexible Sensor A High Alarm
34
Gas Choke On
80
Delayed Load Output 4
126
Flexible Sensor A High Pre-Alarm
35
Gas Ignition
81
Air Filter Maintenance
127
Flexible Sensor A Low Alarm
36
Generator Available
82
Oil Filter Maintenance
128
Flexible Sensor A Low Pre-Alarm
37
Generator High Voltage
Alarm
83
Fuel Filter Maintenance
129
Flexible Sensor A Open Circuit
38
Generator Low Voltage
Alarm
84
System in Stop Mode
130
Fan Speed Low
39
kW Overload Alarm
85
System in Auto Mode
131
Fuel Usage Alarm
40
Over Current Immediate
Warning
86
System in Manual Mode
132
Low Coolant Level
41
Delayed Over Current Alarm
87
RESERVED
133
Low Coolant Level Open Circuit
42
High Coolant Temp
Shutdown
88
Analogue Input A (Digital)
134
Waiting To Start
43
Low Oil Pressure Shutdown
89
Analogue Input B (Digital)
135
High Coolant Temp Pre-Alarm
44
Mains High Frequency
90
Analogue Input C (Digital)
45
Mains High Voltage
91
RESERVED
Functionality in DSE4510 MKII & DSE4520 MKII
Functionality in DSE4520 MKII only
TYPICAL WIRING DIAGRAM
DIMENSIONS
PANEL CUTOUT
TERMINALS
140 mm x 113 mm x 43 mm
(5.5” x 4.4” x 1.7”)
118 mm x 92 mm
(4.6” x 3.6”)
Tightening Torque: 0.5 Nm (4.5 lb-in)
Conductor Size: 0.5 mm² to 2.5 mm²
(AWG 20 to AWG 13)
NOTE: A larger version of the typical wiring diagram is included in
the product’s operator manual. Refer to DSE Publication:
057-260 DSE4510 MKII & DSE4520 MKII Operator Manual
NOTE: Terminals 25, 26, 27 & 28 are not fitted to the DSE4510 MKII
053-234 Issue 4
DEEP SEA ELECTRONICS
DSE4510 MKII & DSE4520 MKII Installation Instructions
Applicable to module version 3.0.0 and upwards.
EDITING A PARAMETER
•Press the Stop/Reset Mode ( - ) and Auto Mode ()buttons together
to enter the editor mode.
•Press the Up or Down navigation buttons to cycle through the front
panel editor in increments of 100.
•Press the Manual/Start Mode ( + ) or Stop/Reset Mode ( - ) buttons to
cycle through the front panel editor in increments of 1.
•When viewing the parameter to be edited, press the Auto Mode ()button
and the value begins to flash.
•Press the Manual/Start Mode ( + ) or Stop/Reset Mode ( - ) navigation
buttons to adjust the value to the required setting.
•Press the Auto Mode ()button to save the current value, the value
ceases flashing.
•Press and hold the Auto Mode ()button to save and exit the editor, the
configuration icon is removed from the display.
NOTE: Pressing and holding the Manual/Start Mode ( +) or
Stop/Reset Mode ( -) buttons will give auto-repeat functionality.
NOTE: More comprehensive module configuration is possible via PC
configuration software. For further details of module configuration, refer
to DSE Publication: 057-258 DSE4510 MKII & DSE4520 MKII
Configuration Suite PC Software Manual.
Deep Sea Electronics Ltd
Tel: [phone]
Email: [email protected]
Web: www.deepseaelectronics.com
Deep Sea Electronics Inc
Tel: [phone]
Fax: [phone]
Email: [email protected]
Web: www.deepseaelectronics.com
REQUIREMENTS FOR UL CERTIFICATION
Specification
Description
Screw Terminal Tightening Torque
•4.5 lb-in (0.5 Nm)
Conductors
•Terminals suitable for connection of conductor size 13 AWG to 20 AWG (0.5 mm² to 2.5 mm²).
•Conductor protection must be provided in accordance with NFPA 70, Article 240
•Low voltage circuits (35 V or less) must be supplied from the engine starting battery or an isolated secondary circuit.
•The communication, sensor, and/or battery derived circuit conductors shall be separated and secured to maintain at least ¼” (6 mm) separation from the generator and mains connected circuit
conductors unless all conductors are rated 600 V or greater.
Current Inputs
•Must be connected through UL Listed or Recognized isolating current transformers with the secondary rating of 5 A max.
Communication Circuits
•Must be connected to communication circuits of UL Listed equipment
DC Output Pilot Duty
•0.5 A
Mounting
•Suitable for use in type 1 Enclosure Type rating with surrounding air temperature -22 ºF to +158 ºF (-30 ºC to +70 ºC)
•Suitable for pollution degree 3 environments when voltage sensing inputs do not exceed 300 V. When used to monitor voltages over 300 V device to be install in an unventilated or filtered ventilation
enclosure to maintain a pollution degree 2 environment.
Operating Temperature
•-22 ºF to +158 ºF (-30 ºC to +70 ºC)
Storage Temperature
•-40 ºF to +176 ºF (-40 ºC to +80 ºC)
DSE4510 MKII &
DSE4520 MKII