PROCEDURE:
1. REMOVE CONTENTS FROM BOX. VERIFY ALL PARTS ARE PRESENT. READ INSTRUCTIONS
CAREFULLY BEFORE STARTING INSTALLATION. DONOTATTEMPTINSTALLATIONALONE;
PERSONAL INJURY OR DAMAGE TO THE TRUCK MAY RESULT.
2. Remove black tape and large grommets over mounting holes located on the inside of the rocker panel.
3. Mount (1) Double Bolt Plate into rear mounting holes, and (1) Single Bolt Plate into front mounting hole. Secure
them with the included (3) 12mm Lock Washers, (3) 12mm Flat Washers, and (3) 12mm Hex Nuts.
4. Attach front and rear brackets by placing bolts through holes as shown in figure below.
5. Attach Sidebar to brackets using the included (2) ½” x 2” Hex Head Bolts, (2) ½” Flat Washers, and (2) ½” Lock
Washers.
6. Repeat steps 2-5 for opposite Sidebar.
7. Do periodic inspections to the installation to make sure that all hardware is secure and tight.
INSTALLATION INSTRUCTIONS
SIDEBAR PART #DZ 371291/371292/371293
04-08 FORD F-150 SUPERCREW/SUPER CAB