2
TD-001584-01-A
Q-SYS Core Processor
Quick Start Guide
Core 5200-G2 Enterprise Processor
IMPORTANT SAFETY INSTRUCTIONS
• Read these instructions and keep a copy for future reference. Strictly follow and heed all instructions and warnings. Install the device only as instructed.
• Do not use or submerge this device in or near water or liquids.
• Clean only with a dry cloth. Do not use any aerosol spray, cleaner, disinfectant or fumigant on, near, or into the device.
• Do not install the device near any heat sources, such as radiators, heat registers, stoves, or other apparatus (including amplifiers).
• Refer all service to qualified personnel.
• Observe all applicable local codes. Consult a licensed professional engineer when devising an equipment installation to ensure compliance.
Maintenance and Repair
Advanced technology—e.g., the use of modern materials and powerful electronics—requires specially adapted maintenance and repair methods. To avoid
subsequent damage to the equipment, personal injury, and/or creation of additional safety hazards, have all maintenance or repair work on the equipment
performed only by a QSC authorized service station or an authorized QSC international distributor. QSC is not responsible for any injury, harm, or related damages
that arise from any failure of the customer, owner, or user of the equipment to facilitate those repairs.
Hardware description
The Q-SYS Core 5200 is a high-performance Enterprise Processor built on the PowerEdge™ R740 enterprise server platform from Dell™. The PowerEdge R740
is Dell’s 14th generation enterprise server platform and is one of the most trusted server platforms on the market today. The Core 5200 hardware is uniquely
configured to meet the processing demands and low-latency, real-time performance of Q-SYS. The Core 5200 ships with the latest Q-SYS firmware and feature set
pre-installed and with support for local and remote monitoring via familiar IT tools that only Q-SYS and the PowerEdge R740 can offer.
The Q-SYS Core 5200 comes with redundant boot media and with redundant hot-plug power supplies with active hot-spare technology as standard features. Also
standard is QSC’s 2.5” SATA SSD Q-SYS Media Drive for ample storage of media files.
Figures 1 through 3 illustrate the front and rear panels of the Q-SYS Core 5200.
For additional information regarding hardware specifications, regulatory compliance, or iDRAC9, visit the Dell server website at: www.Dell.com/servers.
For additional information regarding the Q-SYS Core 5200 and other software feature specifications, Q-SYS Designer and other Q-SYS Systems products or solutions,
visit the QSC website at www.qsc.com.
