Dell Inspiron 11 3000 Series User manual

Inspiron 11
3000 Series
Service Manual
Computer Model: Inspiron 11–3162
Regulatory Model: P24T
Regulatory Type: P24T001

Catatan, perhatian, dan
peringatan
CATATAN: CATATAN menunjukkan informasi penting yang akan membantu
Anda menggunakan komputer lebih baik lagi.
PERHATIAN: PERHATIAN menunjukkan kemungkinan terjadinya kerusakan
pada perangkat keras atau hilangnya data, dan memberitahu Anda mengenai
cara menghindari masalah tersebut.
PERINGATAN: PERINGATAN menunjukkan potensi kerusakan harta benda,
cedera pribadi, atau kematian
Copyright ©2016 Dell Inc. Hak cipta dilindungi undang-undang. Produk ini dilindungi oleh
undang-undang hak cipta dan hak atas kekayaan intelektual di AS dan internasional. Dell™dan
logo Dell merupakan merek dagang dari Dell Inc. di Amerika Serikat dan/atau yurisdiksi lain.
Seluruh merek dan nama lainnya yang disebutkan di sini dapat merupakan merek dagang
perusahaannya masing-masing.
2016 - 01
Rev. A00

Contents
Sebelum mengerjakan bagian dalam komputer....................8
Persiapan ...........................................................................................................8
Safety instructions..............................................................................................8
Alat bantu yang direkomendasikan...................................................................9
After working inside your computer......................................10
Melepaskan penutup bawah....................................................11
Procedure......................................................................................................... 11
Memasang kembali penutup bawah......................................16
Procedure.........................................................................................................16
Melepaskan baterai....................................................................17
Prerequisites..................................................................................................... 17
Procedure......................................................................................................... 17
Memasang kembali baterai......................................................21
Procedure.........................................................................................................21
Post-requisites................................................................................................. 21
Melepaskan board I/O.............................................................. 22
Prerequisites.....................................................................................................22
Procedure.........................................................................................................22
Memasang kembali board I/O.................................................25
Procedure.........................................................................................................25
Post-requisites................................................................................................. 25
3

Melepaskan modul memori.....................................................26
Prerequisites.....................................................................................................26
Procedure........................................................................................................ 26
Memasang kembali modul memori....................................... 28
Procedure........................................................................................................ 28
Post-requisites.................................................................................................29
Melepaskan hard disk............................................................... 30
Prerequisites.................................................................................................... 30
Procedure........................................................................................................ 30
Memasang kembali hard disk..................................................33
Procedure.........................................................................................................33
Post-requisites................................................................................................. 33
Melepaskan port adaptor daya............................................... 34
Prerequisites.....................................................................................................34
Procedure........................................................................................................ 34
Memasang kembali port adaptor daya..................................36
Procedure........................................................................................................ 36
Post-requisites.................................................................................................36
Melepaskan kartu nirkabel.......................................................37
Prerequisites.....................................................................................................37
Procedure.........................................................................................................37
Memasang kembali kartu nirkabel.........................................39
Procedure........................................................................................................ 39
Post-requisites.................................................................................................40
4

Melepaskan baterai sel berbentuk koin................................ 42
Prerequisites.....................................................................................................42
Procedure........................................................................................................ 42
Memasang kembali baterai sel berbentuk koin...................44
Procedure........................................................................................................ 44
Post-requisites.................................................................................................44
Melepaskan panel sentuh........................................................ 45
Prerequisites.....................................................................................................45
Procedure........................................................................................................ 45
Memasang kembali panel sentuh...........................................49
Procedure........................................................................................................ 49
Post-requisites.................................................................................................50
Removing the speaker.............................................................. 51
Prerequisites..................................................................................................... 51
Procedure.........................................................................................................51
Replacing the speaker.............................................................. 53
Procedure.........................................................................................................53
Post-requisites................................................................................................. 53
Melepaskan unit display...........................................................54
Prerequisites.....................................................................................................54
Procedure........................................................................................................ 54
Memasang kembali unit display............................................. 58
Procedure........................................................................................................ 58
Post-requisites.................................................................................................58
5

Melepaskan board sistem........................................................ 59
Prerequisites.....................................................................................................59
Procedure........................................................................................................ 59
Memasang kembali board sistem...........................................63
Procedure........................................................................................................ 63
Post-requisites.................................................................................................64
Melepaskan unit sandaran tangan dan keyboard............... 65
Prerequisites.....................................................................................................65
Procedure........................................................................................................ 65
Memasang kembali unit sandaran tangan dan
keyboard..................................................................................... 67
Procedure.........................................................................................................67
Post-requisites................................................................................................. 67
Melepaskan bezel display........................................................ 68
Prerequisites.................................................................................................... 68
Procedure........................................................................................................ 68
Memasang kembali bezel display........................................... 71
Procedure......................................................................................................... 71
Post-requisites..................................................................................................71
Melepaskan engsel display...................................................... 72
Prerequisites.....................................................................................................72
Procedure.........................................................................................................72
Memasang kembali engsel display.........................................74
Procedure.........................................................................................................74
Post-requisites................................................................................................. 74
6

Melepaskan panel display........................................................ 75
Prerequisites.....................................................................................................75
Procedure.........................................................................................................75
Memasang kembali panel display...........................................78
Procedure.........................................................................................................78
Post-requisites................................................................................................. 78
Melepaskan kamera.................................................................. 79
Prerequisites.....................................................................................................79
Procedure.........................................................................................................79
Memasang kembali kamera.....................................................82
Procedure........................................................................................................ 82
Post-requisites.................................................................................................82
Melepaskan unit penutup-belakang display dan antena
83
Prerequisites.....................................................................................................83
Procedure........................................................................................................ 83
Memasang kembali unit penutup-belakang display dan
antena..........................................................................................85
Procedure........................................................................................................ 85
Post-requisites.................................................................................................85
Flashing the BIOS...................................................................... 86
Mendapatkan bantuan dan menghubungi Dell...................87
Sumber daya bantuan mandiri........................................................................ 87
Menghubungi Dell...........................................................................................88
7

Sebelum mengerjakan bagian
dalam komputer
CATATAN: The images in this document may differ from your computer
depending on the configuration you ordered.
Persiapan
1 Simpan dan tutup semua file yang terbuka, lalu keluar dari semua aplikasi
yang terbuka.
2 Matikan komputer Anda.
– Windows 10: Klik atau ketuk Mulai → Matikan → Daya.
– Windows 8.1: Pada layar Mulai, klik atau ketuk ikon daya →
Matikan.
– Windows 7: Klik atau ketuk Mulai → Matikan .
CATATAN: Jika menggunakan sistem operasi lain, lihat dokumentasi
sistem operasi Anda untuk petunjuk penonaktifan.
3 Lepaskan komputer dan semua perangkat yang terpasang dari
stopkontak.
4 Lepaskan sambungan semua kabel seperti kabel telepon, kabel jaringan
dan sebagainya, dari komputer Anda.
5 Lepaskan sambungan semua perangkat dan periferal yang terpasang,
seperti keyboard, mouse, monitor, dan sebagainya, dari komputer Anda.
6 Lepaskan semua kartu media dan cakram optik dari komputer Anda, jika
ada.
Safety instructions
Use the following safety guidelines to protect your computer from potential
damage and ensure your personal safety.
WARNING: Before working inside your computer, read the safety
information that shipped with your computer. For more safety best
practices, see the Regulatory Compliance home page at
www.dell.com/regulatory_compliance.
8

WARNING: Disconnect all power sources before opening the
computer cover or panels. After you finish working inside the
computer, replace all covers, panels, and screws before connecting to
the electrical outlet.
CAUTION: To avoid damaging the computer, ensure that the work
surface is flat and clean.
CAUTION: To avoid damaging the components and cards, handle
them by their edges, and avoid touching pins and contacts.
CAUTION: You should only perform troubleshooting and repairs as
authorized or directed by the Dell technical assistance team. Damage
due to servicing that is not authorized by Dell is not covered by your
warranty. See the safety instructions that shipped with the product or
at www.dell.com/regulatory_compliance.
CAUTION: Before touching anything inside your computer, ground
yourself by touching an unpainted metal surface, such as the metal at
the back of the computer. While you work, periodically touch an
unpainted metal surface to dissipate static electricity, which could
harm internal components.
CAUTION: When you disconnect a cable, pull on its connector or on
its pull tab, not on the cable itself. Some cables have connectors with
locking tabs or thumb-screws that you must disengage before
disconnecting the cable. When disconnecting cables, keep them
evenly aligned to avoid bending any connector pins. When connecting
cables, ensure that the ports and connectors are correctly oriented
and aligned.
CAUTION: Press and eject any installed card from the media-card
reader.
Alat bantu yang direkomendasikan
Prosedur dalam dokumen ini memerlukan alat bantu sebagai berikut:
• Obeng Philips
• Obeng pipih
• Pencungkil plastik
9

After working inside your
computer
CAUTION: Leaving stray or loose screws inside your computer may
severely damage your computer.
1 Replace all screws and ensure that no stray screws remain inside your
computer.
2 Connect any external devices, peripherals, or cables you removed before
working on your computer.
3 Replace any media cards, discs, or any other parts that you removed
before working on your computer.
4 Connect your computer and all attached devices to their electrical
outlets.
5 Turn on your computer.
10

Melepaskan penutup bawah
PERINGATAN: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before working inside your computer. After working inside your
computer, follow the instructions in After working inside your
computer. For more safety best practices, see the Regulatory
Compliance home page at www.dell.com/regulatory_compliance.
Procedure
1 Close the display and turn the computer over.
2 Using a plastic scribe, remove the screw cap from the base-cover
assembly.
1 screw cap 2 plastic scribe
11

3 Remove the screws that secure the base-cover assembly to the palm-
rest and keyboard assembly.
1 screws (9) 2 base-cover assembly
12

4 Pry loose the left side of the base-cover assembly from the palm rest and
keyboard assembly.
1 palm-rest and keyboard
assembly 2 base-cover assembly
13

5 Slide the base-cover assembly to the right and release it from the HDMI
and USB ports.
1 base-cover assembly 2 USB port
3 HDMI port
14

6 Carefully turn over the base-cover assembly.
1 base-cover assembly 2 palm-rest and keyboard
assembly
7 Remove the I/O board.
15

Memasang kembali penutup
bawah
PERINGATAN: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before working inside your computer. After working inside your
computer, follow the instructions in After working inside your
computer. For more safety best practices, see the Regulatory
Compliance home page at www.dell.com/regulatory_compliance.
Procedure
1 Replace the I/O board.
CAUTION: To avoid damage to the computer, ensure that the USB
and HDMI port cut-outs on the base-cover assembly is correctly
aligned with the USB and HDMI ports on the palm rest and
keyboard assembly.
2 Place the base-cover assembly on the palm rest and keyboard assembly
while aligning the USB and HDMI port cut-out on the base-cover
assembly with the USB and HDMI ports.
3 Slide the tabs on the base-cover assembly into the slots on the palm rest
and keyboard assembly and snap the base-cover assembly into place.
4 Replace the screws that secure the base-cover assembly to the palm rest
and keyboard assembly .
5 Replace the screw cap on the base-cover assembly.
16

Melepaskan baterai
PERINGATAN: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before working inside your computer. After working inside your
computer, follow the instructions in After working inside your
computer. For more safety best practices, see the Regulatory
Compliance home page at www.dell.com/regulatory_compliance.
Prerequisites
Follow the procedure from step 1 to step 6 in “Removing the base cover”.
Procedure
1 Disconnect the battery cable from the system board.
17

2 Remove the screws that secure the battery to the palm rest and keyboard
assembly.
1 battery cable 2 screws (3)
3 battery 4 palm rest and keyboard
assembly
3 Tilt the battery (applicable for configuration with hard drive only) to
release the tab on the battery from the hard-drive bracket.
18

4 Lift the battery off the palm rest and keyboard assembly.
1 battery 2 palm rest and keyboard
assembly
3 tab 4 hard-drive bracket
5 Follow the step 1 procedure in “Removing the I/O board”.
19

6 Turn the computer over, open the display, and press the power button
for five seconds to ground the system board.
1 display 2 power button
20