Dell Colour Laser Printer 3110cn User manual

1
Dell™ Color Laser Printer 3110cn
Owner’s Manual
Look Inside For:
• Print Media Guidelines
• Loading Paper
• Setting Up for Local and Network Printing
• Installing Printer Driver
• Using Your Printer
• Maintenance
• Contacting Dell

2
Order Printer Supplies
Dell™ Printer Supplies are available only through Dell. You can order Printer Supplies online at
www.dell.com/supplies or by phone.
US 877-INK-2-YOU Malaysia 1800 88 0553
Algeria Contact your distributor. Mexico 866-851-1754
Argentina Contact your distributor. Netherlands 020-674-4881
Australia 1300 303 290 Norway 231622 64
Austria 08 20-24 05 30 35 Oman Contact your distributor.
Belgium 02.713 1590 Paraguay Contact your distributor.
Canada 1-877-501-4803 Peru Contact your distributor.
Caribbean Islands Contact your distributor. Poland 022 579 59 65
Chile 800-202874
1230-020-3947
PRC 800-858-2425
Puerto Rico 866-851-1760
Colombia 01800-9-155676 Qatar Contact your distributor.
Czech Republic 420 225 372 711 Russia Contact your distributor.
Denmark 3287 5215 Saudi Arabia Contact your distributor.
Egypt Contact your distributor. Singapore 1800 394 7425
Finland 09 2533 1411 South Africa 0860 102 591
France 825387247 Spain 902 120 385
Germany 0800 2873355 Sweden 08 587 705 81
Ireland 1850 707 407 Switzerland 0848 335 599
Israel Contact your distributor. Tunisia Contact your distributor.
Italy 800602705 Turkey Contact your distributor.
Japan 044-556-3551 UAE Contact your distributor.
Jordan Contact your distributor. UK 0870 907 4574
Kuwait Contact your distributor. Uruguay Contact your distributor.
Lebanon Contact your distributor. Venezuela Contact your distributor.
Luxembourg 02.713 1590 Yemen Contact your distributor.

3
Dell™ Color Laser Printer 3110cn
For details on the optional 550-sheet tray module and other additional options, see the User's
Guide
.
1 Operator panel 9 Optional Duplexer
2 Front cover 10 Power cable connector
3 Standard 250-sheet tray 11 USB port
4 Optional 550-sheet feeder 12 Parallel port
5 Multipurpose feeder 13 Optional wireless printer adapter
6 Side button 14 Ethernet port
7 Belt unit 15 Power switch
8 Center output tray
5
7
15
10
14
6
8
1
3
2
11
12
4
9
13

4
Notes, Notices, and Cautions
NOTE: A NOTE indicates important information that helps you make better use of your printer
NOTICE: A NOTICE indicates either potential damage to hardware or loss of data and tells you how to
avoid the problem.
CAUTION: A CAUTION indicates a potential for property damage, personal injury, or death.
Information in this document is subject to change without notice.
©2006 Dell Inc. All rights reserved.
Reproduction in any manner whatsoever without the written permission of Dell Inc. is strictly forbidden.
Trademarks used in this text:
Dell and DELL logo are trademarks of Dell Inc.; Microsoft and Windows are registered
trademarks of Microsoft Corporation;
UNIX is a registered trademark of The Open Group in the United States and
other countries.
Other trademarks and trade names may be used in this document to refer to either the entities claiming the marks and
names of their products. Dell Inc. disclaims any proprietary interest in trademarks and trade names other than its own.
UNITED STATES GOVERNMENT RESTRICTED RIGHTS
This software and documentation are provided with RESTRICTED RIGHTS. Use, duplication or disclosure by the
Government is subject to restrictions as set forth in subparagraph (c)(1)(ii) of the Rights in Technical Data and
Computer Software clause at DFARS 252.227-7013 and in applicable FAR provisions: Dell Inc., One Dell Way, Round
Rock, Texas, 78682, USA.

Contents 5
Contents
Dell™ Color Laser Printer 3110cn ....................................................................................3
1Print Media Guidelines ...............................................................11
Paper ....................................................................................................................................11
Paper Characteristics ..............................................................................................11
Recommended Paper ...............................................................................................12
Unacceptable Paper ................................................................................................12
Selecting Paper .........................................................................................................13
Selecting Preprinted Forms and Letterhead ........................................................14
Printing on Letterhead .............................................................................................14
Selecting Pre-punched Paper ................................................................................15
Transparencies ..................................................................................................................15
Selecting Transparencies .......................................................................................16
Envelopes ............................................................................................................................16
Labels ..................................................................................................................................17
Storing Print Media ...........................................................................................................18
Identifying Print Media Sources and Specifications .................................................18
Print Media Sizes and Support ...............................................................................18
Print Media Supported .............................................................................................19
Setup Paper Type ......................................................................................................20
2Loading Paper ...............................................................................21
Loading the Standard 250-Sheet Tray ............................................................................21
Loading the Multipurpose Feeder ..................................................................................24
Loading Envelopes ............................................................................................................26
3Setting Up for Local Printing .....................................................27
Installing Printer Drivers .................................................................................................27
Windows XP, XP x64, Server 2003, Server 2003 x64 and 2000 ...........................27

6Contents
Windows NT 4.0 ........................................................................................................27
4Setting up Network Printing ...................................................... 29
Network Set-Up .................................................................................................................29
Disable Microsoft®Windows®XP Firewall Before Printer Software
Installation .................................................................................................................29
Print and Check the Printer Settings Page ...........................................................29
Printer Setup ..............................................................................................................30
Determining the Wireless Network Settings .......................................................32
Wireless Installation using USB connection .......................................................32
Wireless Installation using wireless connection ................................................34
Wireless Installation using Dell Printer Configuration Web Tool .....................38
Wireless Setting through Dell Printer Configuration Web Tool -
Advanced setup ........................................................................................................44
5Installing the PPD File on Macintosh Computers .................. 51
Installing the PPD File ......................................................................................................51
Adding a Printer on Mac OS X 10.4.2 or Later Version(s) ..................................51
Adding a Printer on Mac OS X 10.3 or Earlier Version(s) ...................................53
Configure Settings ....................................................................................................54
6Using Your Printer ....................................................................... 57
Changing Printer Settings ................................................................................................57
Resetting Defaults ....................................................................................................58
Setting of Panel Lock ...............................................................................................58
Adjusting the Language ...................................................................................................58
Printing a Job .....................................................................................................................58
Canceling a Job From the Printer Operator Panel ......................................................59
Canceling a Job From a Computer .................................................................................59
Canceling a Job From the Taskbar ........................................................................59
Canceling a Job From the Desktop ........................................................................59
Software Overview ...........................................................................................................59
Printing Status Window ...........................................................................................59

Contents 7
Status Window ..........................................................................................................59
Status Monitor Console ...........................................................................................59
Dell Supplies Management System™ ...................................................................60
User Setup Disk Creating Tool ................................................................................60
Software Update .......................................................................................................60
7Maintenance .................................................................................61
Replacing Print Cartridges ..............................................................................................61
Removing the Used Print Cartridge .......................................................................61
Installing a New Print Cartridge .............................................................................62
Replacing the Fuser ..........................................................................................................65
Removing the Used Fuser ........................................................................................65
Installing a New Fuser .............................................................................................67
Replacing Separator Rollers ...........................................................................................69
Removing the Used Separator Roller in Tray .......................................................69
Installing the New Separator Roller in the Tray ..................................................71
Removing the Used Separator Roller Inside the Printer ....................................73
Installing the New Separator Roller Inside the Printer ......................................76
Replacing the Belt Unit ....................................................................................................77
Removing the Used Belt Unit ..................................................................................77
Installing a New Belt Unit ........................................................................................79
8Appendix .......................................................................................81
Technical Assistance .......................................................................................................81
Automated Order-Status Service ...................................................................................82
Contacting Dell ..................................................................................................................82
U.S. Terms and Conditions of Sale ...............................................................................100
Limited Warranties and Return Policy ........................................................................102
Limited Warranty for Dell-Branded Hardware Products (U.S. Only) .............102
Dell Return Policy (U.S. Only) ................................................................................106
Limited Warranty Terms for Dell-Branded Hardware Products
(Canada Only) ..........................................................................................................107
Total Satisfaction Return Policy (Canada Only) .................................................110
Dell™ Software and Peripherals (Canada Only) ...............................................110

8Contents
Dell™ Printer Consumables Limited Warranties ......................................................111
Consumables Limited Warranty (U.S. and Canada Only) .................................111
Consumables Limited Warranty (Latin America Only) ......................................111
1-Year End-User Manufacturer Guarantee
(Latin America and the Caribbean Only) .............................................................112
Angreskjema For Norske Forbrukere ..................................................................113
Export Regulations ..........................................................................................................116
Dell Software License Agreement ...............................................................................116
Limited Warranty ....................................................................................................116
Open Source Software ..........................................................................................117
U.S. Government Restricted Rights .....................................................................117
General .....................................................................................................................117
Recycling Information ....................................................................................................118
Waste Electrical and Electronic Equipment (WEEE) Directive .......................118
Regulatory Notices .........................................................................................................121
FCC Notices (U.S. Only) ..........................................................................................121
FCC Class B ..............................................................................................................121
Industry Canada (Canada Only) ............................................................................122
Industry Canada (Canada uniquement) ..............................................................123
CE Notice (European Union) .................................................................................123
Información para NOM (únicamente para México) .........................................127
ENERGY STAR®Compliance .................................................................................127
Index ................................................................................................... 129

9
CAUTION: Safety Instructions
Use the following safety guidelines to help ensure your own personal safety and to
help protect your system and working environment from potential damage.
• Your product uses a laser.
CAUTION: Use of controls or adjustments or performance of procedures other than
those specified herein may result in hazardous radiation exposure.
• Your product uses a printing process that heats the print media, and heat can
cause certain media to release emissions. You must understand the section in
your operating instructions that discusses the guidelines for selecting
appropriate print media to avoid the possibility of harmful emissions.
CAUTION: If your product is not marked with this symbol , it must be connected to
an electrical outlet that is properly grounded.
• The power cord must be connected to an electrical outlet that is near the
product and easily accessible.
• Refer service or repairs, other than those described in the operating instructions,
to a professional service person.
• This product is designed to meet safety standards with the use of specific Dell-
authorized components. The safety features of some parts may not always be
obvious. Dell disclaims liability associated with use of non-Dell-authorized
components.
CAUTION: Do not use this product during a lightning storm.
CAUTION: Do not use any aerosol cleaners including dusters to clean printers as these
may contain flammable content.

10

Print Media Guidelines 11
1
Print Media Guidelines
Print media is paper, transparencies, labels, envelopes, coated paper among others. Your printer
provides high-quality printing on a variety of print media. Selecting the appropriate print media for
your printer helps avoid printing troubles. This section describes how to select print media, how to
care for print media, and how to load the print media in the standard 250-sheet tray or optional
550-sheet feeder.
Paper
For the best print quality in color, use 75 g/m
2
(20 lb) xerographic, grain long paper. For the best
print quality in black and white, use 90 g/m
2
(24 lb) xerographic, grain long paper. Before buying
large quantities of any print media, Dell recommends trying a sample first.
When loading paper, identify the recommended print side on the paper package, and load the
paper accordingly. See "Loading Print Media in Standard and Optional Trays" and "Loading the
Multipurpose Feeder" for detailed loading instructions.
Paper Characteristics
The following paper characteristics affect print quality and reliability. Dell recommends that you
follow these guidelines when evaluating new paper stock.
Weight
The tray automatically feeds paper weights from 60 to 216 g/m
2
(16 to 60 lb bond) grain long. The
multipurpose feeder automatically feeds paper weights from 60 to 216 g/m
2
(16 to 80 lb bond)
grain long. Paper lighter than 60 g/m
2
(16 lb) might not be stiff enough to feed properly, and could
cause paper jams. For best performance, use 75 g/m
2
(20 lb bond) grain long paper.
Curl
Curl is the tendency of print media to curve at its edges. Excessive curl can cause paper feeding
problems. Curl usually occurs after the paper passes through the printer, where it is exposed to high
temperatures. Storing paper unwrapped, even in the paper tray, can contribute to paper curling
prior to printing and cause feeding problems regardless of humidity. When printing on curled
paper, straighten the paper and then insert it into the multipurpose feeder.

12 Print Media Guidelines
Smoothness
The degree of paper smoothness directly affects print quality. If the paper is too rough, the toner
does not fuse to the paper properly, resulting in poor print quality. If the paper is too smooth, it can
cause paper feeding problems. Smoothness between 150 and 250 Sheffield points produces the
best print quality.
Moisture Content
The amount of moisture in the paper affects both print quality and the ability of the printer to feed
the paper properly. Leave the paper in its original packaging until you are ready to use it. This
limits the exposure of the paper to moisture changes that can degrade its performance.
Grain Direction
Grain refers to the alignment of the paper fibers in a sheet of paper. Grain is either grain long, running
the length of the paper, or grain short, running the width of the paper. For 60 to 135 g/m
2
(16 to 36 lb
bond) paper, grain long fibers are recommended. For papers heavier than 135 g/m
2
(36 lb bond), grain
short is preferred.
Fiber Content
Most high-quality xerographic paper is made from 100% chemically pulped wood. Paper containing
fibers such as cotton possess characteristics that can result in degraded paper handling.
Recommended Paper
To ensure the best print quality and feed reliability, use 75 g/m
2
(20 lb) xerographic paper. Business
papers designed for general business use also provide acceptable print quality. Only use paper able
to withstand high temperatures without discoloring, bleeding, or releasing hazardous emissions.
The laser printing process heats paper to high temperatures. Check with the manufacturer or
vendor to determine whether the paper you have chosen is acceptable for laser printers.
Always print several samples before buying large quantities of any type of print media. When
choosing any print media, you should consider the weight, fiber content, and color.
Unacceptable Paper
The following paper types are not recommended for use with the printer:
• Chemically treated papers used to make copies without carbon paper, also known as
carbonless papers, carbonless copy paper (CCP), or no carbon required (NCR) paper
• Preprinted papers with chemicals that may contaminate the printer
• Preprinted papers that can be affected by the temperature in the printer fuser
• Preprinted papers that require a registration (the precise print location on the page) greater
than ±0.09 in., such as optical character recognition (OCR) forms

Print Media Guidelines 13
In some cases, you can adjust registration with your software program to successfully print on
these forms.
• Coated papers (erasable bond), synthetic papers, thermal papers
• Rough-edged, rough or heavily textured surface papers or curled papers
• Recycled papers containing more than 25% post-consumer waste that do not meet DIN 19
309
• Multiple-part forms or documents
• Print quality may deteriorate (blank spaces or blotches may appear in the text) when printing
on talc or acid paper.
Selecting Paper
Proper paper selection helps prevent jams and ensures trouble-free printing.
To help avoid jams or poor print quality:
• Always use new, undamaged paper.
• Before loading the paper, identify the recommended print side of the paper. This information
is usually indicated on the paper package.
• Do not use paper that you have cut or trimmed yourself.
• Do not mix print media sizes, weights, or types in the same source. This may result in a paper
jam.
• Do not remove trays while a job is printing or
Printing is displayed on the operator panel.
• Make sure the
Paper Type setting is correct. (See "Tray Settings" for detailed information
about these settings.)
• Make sure the paper is properly loaded in the tray.
• Flex paper back and forth, and then fan them. Straighten the edges of the stack on a level
surface.

14 Print Media Guidelines
Selecting Preprinted Forms and Letterhead
When selecting preprinted forms and letterhead paper for the printer:
• Use grain long papers for best results.
• Use only forms and letterhead printed using an offset lithographic or engraved printing
process.
• Select papers that absorb ink, but do not bleed.
• Avoid papers with rough or heavily textured surfaces.
• Use papers printed with heat-resistant inks designed for use in xerographic copiers. The ink
must withstand temperatures of 225°C (437°F) without melting or releasing hazardous
emissions.
• Use inks that are not affected by the resin in toner or the silicone in the fuser. Inks that are
oxidation-set or oil-based should meet these requirements; latex inks might not. If you are in
doubt, contact your paper supplier.
Printing on Letterhead
Check with the manufacturer or vendor to determine whether the preprinted letterhead you have
selected is acceptable for laser printers.
Page orientation is important when printing on letterhead. Use the following table for help when
loading letterhead in the print media sources.
Print media source Print side Page orientation
Standard 250-sheet tray
Optional 550-sheet feeder
Face up Letterhead enters
the printer last

Print Media Guidelines 15
Selecting Pre-punched Paper
Pre-punched paper brands can differ in the number and placement of holes and in manufacturing
techniques. However, it may not be possible to print on the paper to depending on the placement
of holes on the paper.
To select and use pre-punched paper:
• Test paper from several manufacturers before ordering and using large quantities of pre-
punched paper.
• Paper should be punched at the paper manufacturer and not drilled into paper already
packaged in a ream. Drilled paper can cause jams when multiple sheets feed through the
printer. This may result in a paper jam.
• Pre-punched paper can include more paper dust than standard paper. Your printer may
require more frequent cleaning and feed reliability may not be as good as standard paper.
• Weight guidelines for pre-punched paper are the same as non-punched paper.
Transparencies
You can load up to 75 sheets of transparencies in the multipurpose feeder for a single print job.
Before buying large quantities of any print media, Dell recommends trying a sample first.
When printing on transparencies:
• Set the paper type to
Transparency from the printer driver to avoid damaging your printer.
• Use transparencies designed specifically for laser printers. Do not use regular transparencies.
Transparencies must be able to withstand temperatures of 205°C (401°F) without melting,
discoloring, offsetting or releasing hazardous emissions.
Multipurpose feeder Face down Letterhead enters
the printer first
Print media source Print side Page orientation

16 Print Media Guidelines
• Avoid getting fingerprints on the transparencies. This may result in poor print quality.
• Before loading transparencies, fan the stack to prevent sheets from sticking together.
• Non-white transparencies are not supported with the printer.
Selecting Transparencies
The printer can print directly on transparencies designed for use in laser printers. Print quality and
durability depend on the transparency used. Before buying large quantities of any print media, Dell
recommends trying a sample first.
The paper type setting for the multipurpose feeder should be set to
Transparency to help
prevent jams. (See "Tray Settings" for detailed information about this setting.) Check with the
manufacturer or vendor to determine whether your transparencies are compatible with laser
printers that reach temperatures as high as 205°C (401°F). Only use transparencies that are able to
withstand these temperatures without melting, discoloring, offsetting, or releasing hazardous
emissions.
Envelopes
You can load a stack of envelopes up to 15 mm (0.59 in.) in height in the multipurpose feeder for a
single print job. Depending on the type of envelope and how they have been stored, loading a large
quantity of envelopes, within the maximum range, may not feed into the printer. If this happens,
reduce the number of envelopes in the stack. Depending on the choice of envelopes, it is possible
to expect variable levels of light wrinkling. Before buying large quantities of any print media, Dell
recommends trying a sample first. See "Loading the Multipurpose Feeder" for instructions on
loading an envelope.
When printing on envelopes:
• Use only high-quality envelopes that are designed for use in laser printers.
• Set the print media source to the multipurpose feeder. Set the paper type to
Envelope , and
select the correct size of envelope from the printer driver.
• For best performance, use envelopes made from 75 g/m
2
(20 lb bond) paper. You can use up
to 105 g/m
2
(28 lb bond) weight for the envelope feeder as long as the cotton content is 25%
or less. Envelopes with 100% cotton content must not exceed 90 g/m
2
(24 lb bond) weight.
• Use only new, undamaged envelopes.
• For best performance, do not use envelopes that:
• Have excessive curl or twist
• Are stuck together or damaged in any way
• Contain windows, holes, perforations, cutouts, embossing
• Use metal clasps, string ties, or metal folding bars
• Have an interlocking design

Print Media Guidelines 17
• Have postage stamps attached
• Have any exposed adhesive when the flap is in the sealed or closed position
• Have nicked edges or bent corners
• Have rough, cockle, or laid finishes
• Use envelopes that can withstand temperatures of 205°C (401°F) without sealing, excessive
curling, wrinkling, or releasing hazardous emissions. If you have any doubts about the
envelopes you are considering, check with the envelope supplier.
• Adjust the width guide to fit the width of the envelopes.
• To load envelope in the multipurpose feeder, insert the envelopes with the flaps closed and
the short-edge of the envelopes facing into the printer. The print side must be facing down.
• See "Loading the Multipurpose Feeder" for instructions on loading an envelope.
• Use one envelope size during a print job.
• Make sure the humidity is low because high humidity (more than 60%) and the high printing
temperatures may seal the envelopes.
Labels
Your printer can print on many labels designed for use with laser printers. Label adhesives, face
sheet (printable stock), and topcoats must be able to withstand temperatures of 205°C (401°F) and
pressure of 25 pounds per square inch (psi). Before buying large quantities of any print media, Dell
recommends trying a sample first.
When printing on labels:
• Set the paper type to
Label in the Tray Settings . Set the paper type to Label from the
printer driver.
• Do not load labels together with paper or transparencies in the same tray. This may result in a
jam.
• Do not use label sheets with a slick backing material.
• Do not print within 1 mm (0.04 in.) of the die cut.
• Use full label sheets. Partial sheets may cause labels to peel off during printing, resulting in a
jam. Partial sheets also contaminate your printer and your cartridge with adhesive, and could
void your printer and cartridge warranties.
• Use labels that can withstand temperatures of 205°C (401°F) without sealing, excessive
curling, wrinkling, or releasing hazardous emissions.
• Do not print within 1 mm (0.04 in.) of the edge of the label, of the perforations, or between
die-cuts of the label.

18 Print Media Guidelines
• Do not use label sheets that have adhesive to the edge of the sheet. Dell recommends zone
coating of the adhesive at least 1 mm (0.04 in.) away from edges. Adhesive material
contaminates your printer and could void your warranty.
• If zone coating of the adhesive is not possible, a 3 mm (0.125 in.) strip should be removed on
the leading and driver edge, and a non-oozing adhesive should be used.
• Remove a 3 mm (0.125 in.) strip from the leading edge to prevent labels from peeling inside
the printer.
• Portrait orientation is preferred, especially when printing bar codes.
• Do not use labels that have exposed adhesive.
Storing Print Media
For proper print media storage, the following guidelines help avoid media feeding problems and
uneven print quality.
• For best results, store print media in an environment where the temperature is approximately
21°C (70°F) and the relative humidity is 40%.
• Store cartons of print media on a pallet or shelf, rather than directly on the floor.
• If you store individual packages of print media out of the original carton, make sure they rest
on a flat surface so that the edges do not buckle or curl.
• Do not place anything on top of the print media packages.
Identifying Print Media Sources and Specifications
The following tables provide information on standard and optional print media sources.
Print Media Sizes and Support
Multipurpose feeder Standard 250-sheet tray Optional 550-sheet
feeder
Optional duplexer
A4 Y Y Y Y
A5 Y Y Y Y
B5 Y Y Y Y
Letter Y Y Y Y
Folio
(8.5 x 13 in.)
YYYY
Legal
(8.5 x 14 in.)
YYYY
Executive Y Y Y Y

Print Media Guidelines 19
*1 The tray supports user-specified print media that are 76.2 mm (3.00 in.) to 220 mm (8.66 in.) wide and 98.4 mm
(3.87 in.) to 355.6 mm (14.00 in.) long.
*2 The tray supports user-specified print media that are 148.5 mm (5.85 in.) to 215.9 mm (8.50 in.) wide and 210 mm
(8.27 in.) to 355.6 mm (14.00 in.) long.
*3 The duplexer supports user-specified print media that are 148.5 mm (5.85 in.) to 215.9 mm (8.50 in.) wide and 210
mm (8.27 in.) to 355.6 mm (14.00 in.) long.
Print Media Supported
COM-10
Envelope
YNNN
MonarchYNNN
C5 YNNN
DL YNNN
Yokeisize2YNNN
Yokeisize3YNNN
Yokeisize4YNNN
Yochokeisize3YNNN
Chokeisize3YNNN
Japanese Post
Card
YNNN
User-specified
print size
Y*1 Y*2 Y*2 Y*3
Multipurpose feeder Standard 250-sheet
tray
Optional 550-sheet
feeder
Optional duplexer
Plain Paper
(60–80 gsm)
YYYY
Plain Paper -Side2
(60–80 gsm)
YNNN
Plain Thick Paper
(81–105 gsm)
YYYY
Plain Thick Paper -
Side2 (81–105 gsm)
YNNN
Covers
(106–163 gsm)
YYYY
Covers -Side2
(106–163 gsm)
YNNN
Covers Thick
(164–216 gsm)
YYYN
Multipurpose feeder Standard 250-sheet tray Optional 550-sheet
feeder
Optional duplexer

20 Print Media Guidelines
Setup Paper Type
Covers Thick -Side2
(164–216 gsm)
YNNN
Transparency Y N N N
Label YYYN
Coated
(106–163 gsm)
YYYY
Coated -Side2
(106 –163 gsm)
YNNN
Coated Thick
(164–216 gsm)
YYYN
Coated Thick -Side2
(164 –216 gsm)
YNNN
JPN Coated S2
(95-105 gsm)
YNNN
Envelope YNNN
Japanese Post Card Y N N N
Recycled YYYY
Paper type Weight (gsm) Remarks
Plain Paper 60-80 -
Plain Thick Paper 81-105 -
Covers 106-163 -
Covers Thick 164-216 -
JPN Coated 95-105 BJP (Bubble Jet Printer) paper
cannot be used.
Coated 106-163 BJP (Bubble Jet Printer) paper
cannot be used.
Coated Thick 164-216 BJP (Bubble Jet Printer) paper
cannot be used.
Transparency - BJP (Bubble Jet Printer) paper
cannot be used.
Label - BJP (Bubble Jet Printer) paper
cannot be used.
Envelopes - -
Multipurpose feeder Standard 250-sheet
tray
Optional 550-sheet
feeder
Optional duplexer