Dell PowerEdge C6220 Manual

FILE LOCATION: D:\Projects\Service Guide\Server\2011_Scorpion\RIS\BMC
Manual\BMC\C6220_BMC_HOM_tp.fm
Template Last Updated -03/06/2010
Dell PowerEdge C6220
Using the Baseboard
Management Controller

FILE LOCATION: D:\Projects\Service Guide\Server\2011_Scorpion\RIS\BMC Manu-
al\BMC\C6220_BMC_HOM_tp.fm
NOTE: A NOTE indicates important information that helps you make better use of
your computer.
CAUTION: A CAUTION indicates potential damage to hardware or loss of data if
instructions are not followed.
WARNING: A WARNING indicates a potential for property damage, personal
injury, or death.
____________________
Information in this publication is subject to change without notice.
© 2012 Dell Inc. All rights reserved.
Reproduction of these materials in any manner whatsoever without the written permission of Dell Inc.
is strictly forbidden.
Trademarks used in this text: Dell™, the DELL logo, and PowerEdge™ are trademarks of Dell Inc.
Microsoft®, Windows®, Windows Server®, MS-DOS®, Windows Vista®, and Internet Explorer®are
either trademarks or registered trademarks of Microsoft Corporation in the United States and/or other
countries. Red Hat®and Red Hat®Enterprise Linux®are registered trademarks of Red Hat, Inc. in
the United States and/or other countries. Oracle and Java are registered trademarks of Oracle and/or
its affiliates. Intel is a registered trademark of Intel Corporation in the U.S. and other countries.
Other trademarks and trade names may be used in this publication to refer to either the entities claiming
the marks and names or their products. Dell Inc. disclaims any proprietary interest in trademarks and
trade names other than its own.
2012 - 03 Rev. A00

FILE LOCATION: D:\Projects\Service Guide\Server\2011_Scorpion\RIS\BMC
Manual\BMC\C6220_BMC_HOM_bk0TOC.fm
Contents 3
Contents
Intelligent Platform Management
Interface . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Baseboard Management Controller. . . . . . . . . . . . 5
Supported Platform . . . . . . . . . . . . . . . . . . . . 5
BMC Key Features and Functions . . . . . . . . . . . . . 5
Using the Web User Interface . . . . . . . . . . . . . . . 6
Logging in to the Web User Interface . . . . . . . . . . . 7
Remote Management Controller . . . . . . . . . . . . . 9
Properties. . . . . . . . . . . . . . . . . . . . . . 10
Chassis . . . . . . . . . . . . . . . . . . . . . . . 11
Configuration . . . . . . . . . . . . . . . . . . . . 12
Sessions . . . . . . . . . . . . . . . . . . . . . . 21
Update . . . . . . . . . . . . . . . . . . . . . . . 22
Utilities . . . . . . . . . . . . . . . . . . . . . . . 24
Server Information . . . . . . . . . . . . . . . . . . . . 25
Power . . . . . . . . . . . . . . . . . . . . . . . . 25
Thermal . . . . . . . . . . . . . . . . . . . . . . . 31
System Event Log. . . . . . . . . . . . . . . . . . . . . 35
Event Management . . . . . . . . . . . . . . . . . 36
Serial Over LAN . . . . . . . . . . . . . . . . . . . . . 42
vKVM & vMedia . . . . . . . . . . . . . . . . . . 43

FILE LOCATION: D:\Projects\Service Guide\Server\2011_Scorpion\RIS\BMC
Manual\BMC\C6220_BMC_HOM_bk0TOC.fm
4Contents
Using the Video Viewer . . . . . . . . . . . . . . . . . 47
Video Viewer Menu . . . . . . . . . . . . . . . . . 48
IPMI 1.5/2.0 Command Support List . . . . . . . . . . . 51
Sensor Summary . . . . . . . . . . . . . . . . . . . . . 61
Threshold Settings and Converting Formulas . . . . . . 66

Template Last Updated - 2/7/2007 5
Intelligent Platform Management
Interface
The Intelligent Platform Management Interface (IPMI) defines a set of
standardized, message-based interfaces that monitor system hardware health
(fan speed, temperature, voltage, power supply, and so on.), control system
components, and store data about important system events in a system event
log (SEL) for later examination. IPMI provides the foundation for remote
platform management.
NOTE: To learn more about IPMI, see intel.com/design/servers/ipmi/.
Baseboard Management Controller
The key component in the IPMI system is the baseboard management
controller (BMC), a microcontroller located on the server’s system board.
BMC is the “intelligence” within the IPMI architecture, responsible for
monitoring and controlling the server’s manageable devices.
BMC is connected to the various sensors through the Intelligent Platform
Management Bus (IPMB), a subset of the I2C bus. System software
communicates with BMC using a keyboard controller style (KCS) interface.
Supported Platform
PowerEdge C6220
BMC Key Features and Functions
The features supported by BMC are as follows:
• Support for IPMI v1.5 and v2.0
• Out-of-band monitoring and control for server management over LAN
• Dedicated NIC for remote management via network
• FRU information report, which includes system board part number,
product name, and manufacturer.
• Health status/hardware monitoring report
• View and clear events log
• Event notification by lighting chassis LED indicator and Platform Event
Trap ( PET)

6
FILE LOCATION: D:\Projects\Service Guide\Server\2011_Scorpion\RIS\BMC
Manual\BMC\C6220_BMC_HOM_section1.fm
• Platform Event Filtering (PEF) to take selected action for selected events
• Chassis management, which includes power control, status report, front
panel buttons, and LEDs control
• Watchdog and auto server re-start and recovery
• Multi-session user and alert destination for LAN channel
Using the Web User Interface
The BMC firmware features an embedded web server, enabling users to
connect to the BMC using an Internet browser (Windows Internet Explorer)
without needing to install KVM and virtual storage software on a remote
console.
Web-based GUI is supported on the following browsers:
• Microsoft Windows:
– Internet Explorer 6, 7, 8, 9
– Mozilla Firefox 7, 8, 9
– Google Chrome 3.0 (optional)
•Linux:
– Mozilla Firefox 7, 8, 9
•MacOS
* :
– Safari V5.X
* Default Java Machine — Java Runtime Environment (JRE) is not yet supported.
Open Java Development Kit (OpenJDK) is supported and recommended. For more
information, see openjdk.java.net.

7
FILE LOCATION: D:\Projects\Service Guide\Server\2011_Scorpion\RIS\BMC
Manual\BMC\C6220_BMC_HOM_section1.fm
Logging in to the Web User Interface
Users must enter the PowerEdge C6220 embedded server IP address or URL
(default DHCP\static IP address) into the address bar of the web browser.
When connecting to the PowerEdge C6220 using a web browser, Secure
Sockets Layer (SSL) is automatically activated and the display user login form
is displayed prompting for the username and password. This authentication
with SSL protection prevents unauthorized intruders from gaining access to
the PowerEdge C6220 web server. If authentication is passed, you can manage
the server by privilege.
A security certificate warning displays, choose Continue to this website (not
recommended) to continue.
The user authentication web page is displayed. Enter the default user name
and password, and click OK.

8
FILE LOCATION: D:\Projects\Service Guide\Server\2011_Scorpion\RIS\BMC
Manual\BMC\C6220_BMC_HOM_section1.fm
NOTE: The default username and password are in lowercase characters. It is
advised to change the root password once you have logged in.
Click the Help button on the top right corner for assistance. Click Logout to
exit.
The Remote Management Controller’s web UI is divided into two areas. On
the left is the multi-level navigation menu bar, which is divided into four
categories and each category is subdivided into several submenus. On the
right is the information pane, which displays list of information, commands
or configuration options that are associated with the category selected from
the navigation menu bar.
Table 1-1. Default User Name and Password
Field Default
User Name root
Password root

9
FILE LOCATION: D:\Projects\Service Guide\Server\2011_Scorpion\RIS\BMC
Manual\BMC\C6220_BMC_HOM_section1.fm
Remote Management Controller
The Remote Management Controller menu provides general information
about the server including the BMC firmware and network information.
Administrators and operators can use this menu to check the sled server
health and access all network configuration options. It also provides options
for managing security, user access, session status, updating the BMC
firmware, and performing remote system shutdown or reboot.
The remote management controller menu provides access to the following
configuration options:
• Properties
•Chassis
• Configuration
• Sessions
•Update
• Utilities

10
FILE LOCATION: D:\Projects\Service Guide\Server\2011_Scorpion\RIS\BMC
Manual\BMC\C6220_BMC_HOM_section1.fm
Properties
The Properties option enables you to view the remote sled server BMC
firmware information.
Table 1-2. Firmware Summary
Item Description
Product Name Sled server system board model name
Product Information Remote Management Controller firmware
Firmware Version Remote Management Controller firmware version
Building Time Date the firmware was last flashed in the following
format:
MM DD YYYY HH: MM: SS
ASIC Type Application-specific integrated circuit (ASIC) type
Refresh Button Use this button to refresh the firmware information