Delta 1748 User manual

COMPLIES WITH:
• ASME A112.18.1M-1996
• ASSE 1016-1996
• CSA B125-93
• Showerhead GSA A-A-240
Indicates ADA compliance to
CABO/ANSI A117.1-1992
• ASSE Seal Authorized
• City of L.A. approved
•
CSA Certified
• IAPMO Listed
BATH MIXING
VALVES
■Tub/Shower (1748 Series)
■Single Handle
■Monitor®with Scald-Guard®Valve
■Pressure Balance
■Volume Controlled with Lever Handle
■Temperature Controlled with Dial
Submitted Model No.: _____________________________________________
Specific Features: ________________________________________________
STANDARD SPECIFICATIONS:
• Requires 11⁄2" (38 mm) wall cavity.
• Back-to-back installation capability.
• Solid brass fabricated body.
• Monitor®with Scald-Guard®valve.
Maintains a balanced pressure of hot
and cold water even when a valve is
turned on or off elsewhere in the system.
• Lever volume control handle; temperature
adjustment dial.
• Field adjustable to limit dial rotation
into hot water zone.
• Maximum dial rotation adjustable
between 90° and 180°.
• Red and Blue graphics indicate
hot/cold temperature adjustment.
1748 1748-MDS
0
1
2
3
4
5
0 102030405060708090
Pressure (PSI)
Flow (U.S. Gallons Per Minute)
6
0 69 138 207 276 345 414 483 552 621
0
3.8
7.6
11.4
15.1
18.9
22.7
Pressure (kPa)
Flow (Liters Per Minute)
Showerhead
Tub Filler
2" (50.8 mm)
C/L Supply
Lines
If recessed, the escutcheon
screws may need to be shortened.
Plus or minus 1/2" (12.7 mm)
- B -
Cover must be removed prior
to installation of trim.
Inlets
8" (203 mm) Min.-
18" (457 mm) Max.
7 1/2"
(190.5 mm)
A
Dimensions A
I.P.S. or C.W.T. 2 1/2" (63.5 mm)
I.P.S. or C.W.T. w/stops 5 1/2" (139.7 mm)
®
®
UPC
UL Listed to US and Canadian
Safety Standards
21PL
Delta reserves the right (1) to make changes in specifications and materials, and (2) to change or discontinue models, both without notice or obligation. Dimensions are for reference only.
2.D.17

A72CL
A72, A72PB,
A72WH
Standard
Features
Washerless ◆◆◆◆◆◆◆◆◆◆◆◆◆◆◆◆◆
Scald-Guard®Valve ◆◆◆◆◆◆◆◆◆ ◆◆◆◆◆◆◆◆
Back-to-Back Installation ◆◆◆◆◆◆◆◆◆ ◆◆◆◆◆◆◆◆
1⁄2"
I.P.S. Inlets and Outlets ◆◆◆ ◆◆◆◆
1⁄2"
C.W.T. Sweat Inlets and Outlets
◆◆◆◆◆◆ ◆◆◆◆
Replaceable Cartridge ◆◆◆◆◆◆◆◆◆ ◆◆◆◆◆◆◆◆
Adjustment Rotational Limit Stop ◆◆◆◆◆◆◆◆◆ ◆◆◆◆◆◆◆◆
Matching Finish Temperature Adjustment Dial ◆◆◆◆◆◆◆◆◆ ◆◆◆◆◆◆◆◆
Volume Control Clear Lever Handle*
Chrome Volume Control Brass Lever Handle*
White Volume Control Brass Lever Handle*
Metal Shower Arm and Flange ◆◆◆◆◆◆◆◆◆◆◆◆◆◆◆◆◆
Non-Metallic Touch-Clean
®
Showerhead/1 Spray Pattern ◆◆◆◆◆ ◆ ◆◆◆◆◆ ◆
Non-Metallic Dual Spray Touch-Clean
®
Showerhead/2 Spray Patterns ◆◆ ◆ ◆◆
Non-Metallic Tub Filler w/Pull-Down Diverter ◆◆◆◆◆◆◆◆◆◆◆
Metal Tub Filler w/Pull-Down Diverter ◆◆
Metal Tub Filler w/Pull-Up Diverter ◆◆ ◆◆
Screwdriver Stops ◆◆◆ ◆◆◆ ◆
Chrome Finish ◆◆◆◆◆ ◆ ◆◆◆◆◆ ◆
Brilliance ™
Polished Brass Finish
◆◆ ◆
White Finish ◆◆
DSP-B-1748 Rev. A
1748
1748-BRS
1748-BRSMDS
1748-C
1748-CBRSMDS
1748-CPB
1748-CPBWS
1748-CSOS
1748-CWHBRS
1748-CWSBRS
1748-CWSMDS
1748-CWSSOS
1748-MDS
1748-PB
1748-WHBRS
Available Options for Field Conversion: ▲=Specify Finish
•Screwdriver Stops. Order two RP5876s for IPS or two RP6005s for C.W.T.
•Shower Arm. Order RP6023▲.
•Shower Flange. Order RP6025▲.
•Non-metallic Push-CleanTM showerhead/1 spray pattern. Order RP28599▲.
•Non-metallic Touch-Clean®showerhead/1 spray pattern. Order RP28600▲.
•Non-metallic Dual Spray Touch-Clean®showerhead/2 spray patterns. Order RP28601▲.
•Non-metallic Ultimate Touch-Clean®showerhead/3 spray patterns. Order RP28602▲.
•Brass shower arm diverter for hand shower. Order RP4239 (chrome only).
•Personal hand shower with 24" vertical bar, 60" hose. Order RP7245 (chrome only).
•Personal hand shower with 24" vertical bar, 60" hose, vacuum breaker and wall supply elbow. Order RPW1111HDF (chrome only).
•Personal handshower with 60" hose, vacuum breaker and wall supply elbow. Order RPW2222HDF (chrome only).
•Metallic tub filler with pull-down diverter for 1/2" C.W.T. or 1/2" I.P.S. Order RP17454▲.
•Non-metallic tub filler with pull-down diverter for 1/2" C.W.T. or 1/2" I.P.S. Order RP17453 (chrome only).
•Non-metallic slip-on tub filler with pull-down diverter for 1/2" C.W.T. Order RP5836 (chrome only).
•Metallic slip-on tub filler with pull-down diverter for 1/2" C.W.T. Order RP19581PB (Brilliance ™polished brass only).
•Metallic tub filler with pull-up diverter for 1/2" C.W.T. or 1/2" I.P.S. Order RP7533▲.
•Non-metallic tub filler with pull-up diverter for 1/2" C.W.T. or 1/2" I.P.S. Order RP5834(chrome only).
•Non-metallic slip-on tub filler with pull-up diverter for 1/2" C.W.T. Order RP19820 (chrome only).
•Metallic over-the-rim tub filler for 1/2" I.P.S. Order RP5833▲.
•Metallic over-the-rim slip-on tub filler for 1/2" C.W.T. Order RP5835 (chrome only).
•Bath waste assemblies and bath accessories also available separately.
2 1/2"
(64 mm)
2 1/2"
(64 mm)
5 1/4"
(133 mm)
5"
(127 mm)
2 1/2"
(64 mm)
5"
(127 mm)
2 1/2"
(64 mm)
4 3/4"
(121 mm)
RP5836
RP17453
RP17454▲
RP19581PB
RP5834
RP7533▲
RP5833▲
RP5835
RP19820
3 7/16"
(87 mm)
3 1/2"
(89 mm)
Full Spray Massage
Spray
Soft
Aerated
Spray
2"
(51 mm)
2 1/2"
(64 mm)
3 1/2"
(89 mm)
4 3/8"
(111 mm)
3 7/16"
(87 mm)
4"
(102 mm)
RP28600▲
Touch-Clean®Showerhead
RP28599▲
Push-CleanTM Showerhead
RP28602▲
Ultimate Touch-Clean®
Showerhead
RP28601▲
Dual Spray Touch-Clean®
Showerhead
1748-CWS
1748-WS
*Handle Accents
Indianapolis, Indiana 46280
A Division of Masco Corporation of Indiana
© 2001 Masco Corporation of Indiana