
General
Power Supply AC 120V, 60kHz
Power Consumption 60W
Maximum Dimensions 11” x 12.6” x 4.1” (W x D x H)
Weight 12.3 LBS
Technical Information
Number of Power Amps
Power Output 35W per channel (8ohms, 1 kHz,
THD 0.1%, 1 ch driven)
70W per channel (4ohms, 1kHz,
THD 0.1%)
Speaker Impedance 4 - 16 Ω/ohms
Sample Rate Digital In 192 kHz / 24-bit
Input Sensitivity 470 mV / 25 kOhm
SN Ratio 112dB
Bluetooth Yes
Compatible Bluetooth
Profiles
2.0/3.0/4.0/4.1
Supported Codecs SBC
Radio Yes
FM / AM Yes / Yes
Ports
IN Digital Optical x 2
Digital Coaxial x 1
USB-A x 1
USB-B x 1
AUX In x 2
OUT Subwoofer Preout x 1
Speaker Output Terminal x 1
Headphones x 1
UPC PMA150HSPE3 883795004893 Black
|V01|
The Bluetooth®word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by D&M Holdings Inc. is under license.
Other trademarks and trade names are those of their respective owners.
Denon is a trademark or registered trademark of D&M Holdings, Inc.
* All specs can be subject to change
High Power Integrated Amplifier
This integrated amplifier provides all the power you need for most
bookshelf and small floor standing speakers. Engineered to provide
a purer digital amplification, the PMA-150H delivers a robust 70
Watts of power-per-channel (THD 0.1%, 1 ch driven), and supports
both 4- and 8-ohm speakers.
Digital Amplifier with Next-Generation DDFA Technology
Enjoy dynamic high-fidelity sound with next-generation Direct
Digital Feedback Amplification (DDFA) technology, which helps this
amplifier keep its outputs free of internal or external analog noise.
With the fully digital PMA-150H, all you’ll hear is uninfluenced
music, in an even purer form.
Built with Best-in-Class Electrical Components
Every electrical component in the PMA-150H was carefully
selected and custom-designed by Denon sound engineers to fine-
tune audio performance and meet the highest quality standards.
Enjoy the highly detailed sound of Denon with precision and power.
Advanced AL32 Processing Plus
Advanced AL32 Processing Plus is the latest in analog waveform
reproduction technology from Denon. This creates a highly
detailed audio experience, free of interference, richly expressive
in the lower range and beautifully faithful to the original sound. It
supports high-resolution audio sources, with the algorithms adding
in the points that should exist before and after large quantities of
data. This smoothens out the waveform and restores information
that was lost during the digital recording.
High-Resolution Audio
Enjoy music with superior detail and precision.
Through HEOS Built-in, this amplifier decodes Hi-Res audio ALAC,
FLAC and WAV lossless files up to 192kHz/24-bit, as well as DSD
2.8MHz and 5.6MHz tracks (the audiophile format of SACD).
Optical, Coaxial Digital, USB-A and USB-B Input
The PMA-150H features two Optical inputs, one Coaxial input, and a
USB-A port to enjoy improved sound from any source. These digital
inputs help to improve sound and visual quality of your TV audio,
Blu-ray, media players and more. You can even use it to input high-
resolution sound from an audio source on your computer. Now
with USB-B DAC support, the PMA-150H powers PCM signals up to
384kHz/32bit and DSD11.2MHz.
Elevated Sound Quality with USB-B DAC
Now with advanced networking and noise isolation circuit for USB-B
DAC, enjoy PCM 384kHz/32bit and DSD file native playback (DSD
2.8/5.6/11.2MHz) played directly from your computer, all working in
asynchronous mode.
Bluetooth, Wi-Fi Connectivity and Bluetooth OFF mode
Stream your favorite audio tracks wirelessly via Wi-Fi and Bluetooth.
The PMA-150H is equipped with 2.4GHz(11b/g/n), 5GHz(11a/n)
technology for compatibility with the widest range of smart devices.
You can also turn off Bluetooth mode to remove any unwanted
frequencies while listening to other sources.
Compact Chassis with Clear OLED
The stylish, elegant compact chassis features deluxe finishes,
including soft aluminum matte with bright silver tone accents and
glossy and matte black surfaces. The OLED shows the source
selected via graphical icons and text, as well as the sampling
frequency and data format of digital sources.
Hi-Fi Oriented Sound Development
With an internal structure built to optimize high-fidelity audio, the
PMA-150H features separate circuit boards to allow for incredibly
detailed, highly refined sound.
HEOS Built-in Multi-Room Streaming
HEOS Built-in technology lets you enjoy your favorite music in any
room of your home for a wireless, whole-home audio experience.
Play the same song in every room, or select a different song for
each connected room — the choice is yours. Enjoy music from
Spotify Premium and free, Pandora, TIDAL, TuneIn Internet Radio,
SoundCloud, Amazon Music, Napster, Deezer or your local music
file libraries. With additional HEOS components like the HEOS
speaker range or other HEOS-capable receivers, easily play all
your music in multiple rooms.
High Quality Headphone Output
For exceptional audio fidelity, the PMA-150H is equipped with a
dedicated headphone amplifier circuit that features a high-speed,
ultra-low distortion wideband op amp that’s paired with a fully
discrete final output stage. In order to accommodate the widest
range of headphone types, the PMA-150H features an adjustable
headphone impedance control, with three settings for low, medium
and high impedance headphones. The headphone jack offers
a 6.3mm connector for compatibility with premium home and
professional studio headphone models.
Ergonomic Remote Control
The supplied remote control features an ergonomically designed
layout that includes a cursor keypad, source select and volume
controls, setup menu buttons, a Bluetooth button and a display
dimmer button.
IR Learning and Digital Input Sensing
The PMA-150H powers up automatically when sensing a digital
input from your TV, enabling you to control the PMA-150H with
your TV remote. The PMA-150H features IR Learning, enabling you
to turn volume up, down, on or off with your TV remote.
Denon
1 Viper Way
Vista, CA 92081
www.denon.com