Denon PMA-A110 User manual

Quick start guide
PMA-A110
Read
me
first
1.PMA-A110E3_QSG_ENG_00A_200623.indd 11.PMA-A110E3_QSG_ENG_00A_200623.indd 1 2020/06/29 19:37:262020/06/29 19:37:26
PrintingColor:表1 Read me firstのみPANTONE 10394C、その他Black

1
Welcome Before You Begin
Thank you for choosing a Denon amplifier.
This guide provides step-by-step instructions for setting up your amplifier.
What’s In the Box
Quick Start Guide Power cord
Safety Instructions Remote control unit
(RC-1237)
Warranty (for North
America model only) R03/AAA batteries
Integrated Amplifier
1.PMA-A110E3_QSG_ENG_00A_200623.indd 11.PMA-A110E3_QSG_ENG_00A_200623.indd 1 2020/06/29 19:37:272020/06/29 19:37:27
PrintingColor:Black

EN
FR
ES
2
Computer USB cable
CD player Speaker systems Speaker cables
Required for Setup
Optional
These drawings are for illustrative purposes only and
may not represent the actual product(s).
1.PMA-A110E3_QSG_ENG_00A_200623.indd 21.PMA-A110E3_QSG_ENG_00A_200623.indd 2 2020/06/29 19:37:272020/06/29 19:37:27
PrintingColor:Black

3
Setup
There are six steps to the setup process.
Batteries
1Install batteries in the
remote control unit
1Install batteries in the remote control unit
2Connect the speakers to PMA-A110
3Connect the CD player to PMA-A110
4Plug the power cord into a power outlet
5Begin CD playback
6
Listen to computer audio via USB-DAC
1) Install the Windows driver software
2) Connect to PC or Mac
3) Listen to audio from PC or Mac
1.PMA-A110E3_QSG_ENG_00A_200623.indd 31.PMA-A110E3_QSG_ENG_00A_200623.indd 3 2020/06/29 19:37:272020/06/29 19:37:27
PrintingColor:Black

EN
FR
ES
4
2Connect the speakers to PMA-A110
Connecting the speaker cables
q Peel o about 3/8 inch (10 mm) of sheathing
from the tip of the speaker cable, then either
twist the core wire tightly or apply solder to it.
wTurn the speaker terminal counterclockwise
to loosen it.
eInsert the speaker cable’s core wire to all
the way into the speaker terminal.
rTurn the speaker terminal clockwise to
tighten it.
w q
(R)
w q
(L)
1.PMA-A110E3_QSG_ENG_00A_200623.indd 41.PMA-A110E3_QSG_ENG_00A_200623.indd 4 2020/06/29 19:37:272020/06/29 19:37:27
PrintingColor:Black

5
3Connect the CD player to PMA-A110
AUDIO
R L
OUT
L
R
L
R
Your CD player
1.PMA-A110E3_QSG_ENG_00A_200623.indd 51.PMA-A110E3_QSG_ENG_00A_200623.indd 5 2020/06/29 19:37:272020/06/29 19:37:27
PrintingColor:Black

EN
FR
ES
6
Power cord (supplied)
Connect to household
power outlet
(AC 120 V, 60 Hz)
4Plug the power cord into a power outlet
1.PMA-A110E3_QSG_ENG_00A_200623.indd 61.PMA-A110E3_QSG_ENG_00A_200623.indd 6 2020/06/29 19:37:272020/06/29 19:37:27
PrintingColor:Black

7
5
1
2
3
Begin CD playback
Set the input source to “CD”.
“CD” is displayed on the display
of this unit.
Press the power operation button.
Turn VOLUME on the main unit to adjust the volume to
the lowest level before turning on the power.
Play the CD player.
4Adjust the volume.
1.PMA-A110E3_QSG_ENG_00A_200623.indd 71.PMA-A110E3_QSG_ENG_00A_200623.indd 7 2020/06/29 19:37:272020/06/29 19:37:27
PrintingColor:Black

EN
FR
ES
8
Install the Windows driver software
Windows OS
System requirements：Windows 8.1 or Windows 10
Download the dedicated driver from the “Download” section of the
PMA-A110 page of the Denon website (https://www.denon.com/)
onto your PC.
Install the driver.
qSelect the language to use for the installation.
wClick “OK”.
eThe wizard menu is displayed. Follow the instructions
on the screen.
rWhen the wizard is completed, click “Yes”.
Unzip the downloaded file, and double-click the exe file.
q
w
Please see the FAQ at www.denon.com if you experience any
issues getting audio to play from your computer through the
PMA-A110. You may also want to check the support pages for
audio player application.
r
The installation of the driver software is not necessary in the following cases.
• When you do not play back the music from a PC using USB-DAC of this unit.
• When using a macOS.
The driver software cannot be installed correctly if your PC is connected to the
unit by a USB cable. If the unit and your computer are connected by a USB
cable and the computer is switched on before installation, disconnect the USB
and restart the computer.
NOTE
NOTE
1
6Listen to computer audio via USB-DAC
1
2
3
1.PMA-A110E3_QSG_ENG_00A_200623.indd 81.PMA-A110E3_QSG_ENG_00A_200623.indd 8 2020/06/29 19:37:282020/06/29 19:37:28
PrintingColor:Black

9
Power on.
Press INPUT SELECT to switch the
input source to “USB-DAC”.
Set the audio signal destination to this unit on the computer.
Windows OS
qClick the “Start” button and click “Control Panel” on the PC.
• The control panel setting list is displayed.
wClick the “Sound” icon.
• The sound menu window is displayed.
Computer on which
the driver software
and audio player
software are installed
Type A
USB 2.0 cable
(Sold separately) Type B
Connect to PC or Mac
2Listen to audio from PC or Mac 3
1
2
3
1.PMA-A110E3_QSG_ENG_00A_200623.indd 91.PMA-A110E3_QSG_ENG_00A_200623.indd 9 2020/06/29 19:37:282020/06/29 19:37:28
PrintingColor:Black

EN
FR
ES
10
eCheck that there is a checkmark next to “Default Device” under
in “PMA-A110” of the “Playback” tab.
• When there is a checkmark for a dierent device, click “PMA-
A110” and “Set Default”.
rSelect “PMA-A110” and click “Properties”.
• The PMA-A110 Properties window is displayed.
PMA-A110
r
t
i
y
u
tClick the “Advanced” tab.
ySelect the sampling rate and bit rate to be applied to the D/A
converter.
• It is recommended that “2 channel, 32 bit, 192000 Hz (Studio
Quality)” is selected.
uClick “Apply”.
iClick “Test”.
• Check that audio from this unit is output from the PC.
1.PMA-A110E3_QSG_ENG_00A_200623.indd 101.PMA-A110E3_QSG_ENG_00A_200623.indd 10 2020/06/29 19:37:292020/06/29 19:37:29
PrintingColor:Black

11
rSelect the “PMA-A110” format.
• It is normally recommended to set the format to “384000.0 Hz”
and “2ch-32 bit Interger”.
tQuit Audio MIDI Setup.
PMA-A110
PMA-A110
r
PMA-A110
PMA-A110
e
System requirements: macOS 10.13, 10.14 and 10.15
qMove the cursor to “Go” on the computer screen, and then click
“Utilities”.
• The utility list is displayed.
wDouble-click “Audio MIDI Setup”.
• The “Audio Devices” window is displayed.
eCheck that “Use this device for sound output” is checked in
“PMA-A110”.
• If a dierent device is checked, select and “Secondary click”
on “PMA-A110”, and then select “Use this device for sound
output”.
macOS
1.PMA-A110E3_QSG_ENG_00A_200623.indd 111.PMA-A110E3_QSG_ENG_00A_200623.indd 11 2020/06/29 19:37:292020/06/29 19:37:29
PrintingColor:Black

EN
FR
ES
12
Online Manual
Additional settings to output audio to the PMA-A110 may have to be selected
in your advanced audio player application. Please refer to the user’s manual for
your application.
NOTE
Use your favorite music applications on your PC/Mac to play audio
through the PMA-A110.
• For high resolution audio playback you will need to obtain an
advanced audio player software such as JRiver Media Center or
Audirvana.
• Refer to the Online Manual for other functions information and
operation procedure details.
manuals.denon.com/PMAA110/NA/EN/
• For more information, visit www.denon.com
4
Owner’s Manual
1.PMA-A110E3_QSG_ENG_00A_200623.indd 121.PMA-A110E3_QSG_ENG_00A_200623.indd 12 2020/06/29 19:37:292020/06/29 19:37:29
PrintingColor:Black

www.denon.com
Printed in Japan 5411 11853 00AD
© 2020 Sound United. All Rights Reserved.
4.PMA-A110E3_QSG_BackPage_200623.indd 34.PMA-A110E3_QSG_BackPage_200623.indd 3 2020/06/29 19:38:322020/06/29 19:38:32
PrintingColor:Black