Denon AVR-X4400H User manual

SOUND MODE
SOUND MODE
POWER
POWER
AVR CONTROL
AVR CONTROL
QUICK SELECT
QUICK SELECT
PURE
PURE
MOVIE
MOVIE
GAME
GAME
MUSIC
MUSIC
GAME
GAME
CB
CBL/
SAT
Blu-ray
Blu-ray
D
VD
VD
AUX1
AUX1
AUX2
AUX2
INTERNET
R
ADIO
ADIO
VOLUME
VOLUME
INFO
INFO
SETUP
SETUP
MENU
MENU
Z2
Z 3
Z 3
1
1 2 3 4
2 3
4 5 6
7 8 9
ENTER
ENTER0
+10
+10
GHI
GHI
JKL
JKL
MNO
MNO
PQRS
PQRS
TUV
TUV
ABC
ABC
. /
. /
DEF
DEF SLE
EP
EP
WXYZ
WXYZ
MAIN
MAIN
PHONO
PHONO
DE
V.
V. TV AVR
DEVICE
DEVICE TV
MED
IA
IA
PLAY
ER
ER
CD
CD
Bluetooth
Bluetooth
TUNER
TUNER
TV
AUDIO
AUDIO
MENU
MENU
INP
INPUT
MUTE
MUTE
ECO
ECO
ENTER
ENTER
TUNE
TUNE
TUNE
TUNE
CH/
PAGE
PAGE
BACK
BACK
OPTION
OPTION
RC-1219
USB
USB
uio p
ENTER SETUP
MAIN
BACK
Menu operations
1Press MAIN on the remote control unit to set the
operating zone to the MAIN ZONE.
The MAIN button lights.
2Press SETUP.
The menu is displayed on the TV screen.
3Use ui p to select the menu to be set or operated,
then press ENTER.
4Use o p to change to desired setting.
5Press ENTER to enter the setting.
0To return to the previous item, press BACK.
0Exiting the menu, press SETUP while the menu is displayed. The
menu display disappears.
Contents Connections Playback Settings Tips Appendix
169
Front panel Display Rear panel Remote Index

Audio
Make audio-related settings.
Dialog Level Adjust
This setting adjusts the output level to clarify the dialogue output from the
center channel.
oDialog Level Adjust
Set whether to adjust the dialog level or not.
On: Enables the adjustment of the dialog
level.
Off
(Default):
Disables the adjustment of the dialog
level.
oLevel
Adjusts the volume output from the center channel.
–12.0 dB – +12.0 dB (Default: 0.0 dB)
Subwoofer Level Adjust
This setting adjusts the volume level for the subwoofer.
oSubwoofer Level Adjust
Set whether to adjust the subwoofer level.
On: Enables the adjustment of the subwoofer
level.
Off
(Default):
Disables the adjustment of the subwoofer
level.
oSubwoofer 1 Level / Subwoofer 2 Level
Adjusts the volume level for the Subwoofer 1 and Subwoofer 2.
–12.0 dB – +12.0 dB (Default: 0.0 dB)
Contents Connections Playback Settings Tips Appendix
170
Front panel Display Rear panel Remote Index

Bass Sync
For contents recorded in multi-channel such as Blu-ray discs, the
recorded low frequency effects (LFE) may be out of synch and delayed.
This function corrects such a delay of low frequency effects (LFE).
0 ms – 16 ms (Default : 0 ms)
0How low frequency effects (LFE) are delayed differ according to the disc. Set this
to the desired value.
0“Bass Sync” settings are stored for each input source.
0This can be set when the LFE signal is included in the input signal.
0This cannot be set when the sound mode is “Direct” or “Pure Direct”.
Surround Parameter
You can adjust the surround audio sound field effects to match your
preferences.
The items (parameters) that can be adjusted depend on the signal being
input and the currently set sound mode. For details on the adjustable
parameters, see “Sound modes and surround parameters” (v p. 299).
0Some setting items cannot be set while playback is stopped. Make the settings
during playback.
0“Surround Parameter” settings are stored for each sound mode.
oCinema EQ
Gently softens the upper treble range of movie soundtracks to reduce
possible harshness and improve clarity.
On: “Cinema EQ” is used.
Off
(Default):“Cinema EQ” is not used.
Contents Connections Playback Settings Tips Appendix
171
Front panel Display Rear panel Remote Index

oLoudness Management
This sets whether to output as specified in “Dynamic Compression” or
output directly without compressing the dynamic range of audio
recorded in the disc.
On
(Default):
Outputs are given based on enabling the
settings made in “Dynamic Compression”
and Dialogue normalization function.
Off:
“Dynamic Compression” settings and
Dialogue normalization are disabled, and
the signals on the disc are output as is.
0“Loudness Management” can be set when Dolby Digital, Dolby Digital Plus,
Dolby TrueHD and Dolby Atmos signal is input.
oDynamic Compression
Compress dynamic range (difference between loud and soft sounds).
Auto: Automatic dynamic range compression
on/off control according to source.
Low / Medium / High: These set the compression level.
Off: Dynamic range compression is always
off.
0“Dynamic Compression” can be set when Dolby Digital, Dolby Digital Plus,
Dolby TrueHD, Dolby Atmos or DTS signal is input.
0The default setting is “Off”. When the input signal is the Dolby TrueHD or
Dolby Atmos source, the default setting is “Auto”.
0“Auto” cannot be set when inputting a DTS signal.
Contents Connections Playback Settings Tips Appendix
172
Front panel Display Rear panel Remote Index

oDialog Control
Adjust the volume of dialog in movies, vocals in music, etc. so these
can be heard more easily.
0 – 6 (Default : 0)
0This can be set when a DTS:X signal that is compatible with the Dialog Control
function is input.
oLow Frequency Effects
Adjust the low frequency effects level (LFE).
-10 dB – 0 dB (Default: 0 dB)
0For proper playback of the different sources, we recommend setting to the
values below.
0Dolby Digital sources: 0 dB
0DTS movie sources: 0 dB
0DTS music sources: -10 dB
oCenter Spread
Center Spread expands the center channel signal to left and right front
speakers to create a wider frontal audio image for the listener. It is
optimized and designed primary for playback of stereo music content.
On: Use “Center Spread”.
Off
(Default):Do not use “Center Spread”.
0You can set this when sound mode is “Dolby Surround”.
oDTS Neural:X
DTS Neural:X Expands the non-object based audio signals and
optimizes them for your speaker configuration.
On
(Default):Use “DTS Neural:X”.
Off: Do not use “DTS Neural:X”.
0You can set this when sound mode is “DTS:X” or “DTS:X MSTR”.
Contents Connections Playback Settings Tips Appendix
173
Front panel Display Rear panel Remote Index

oAuro-Matic 3D Preset
Selects the Auro-Matic 3D Preset for fine tuning the Auro-3D
experience to specific audio material.
Small:
Small is ideal for pop and chamber music
or movies with a lot of dialog. (e.g.
comedy)
Medium
(Default):
Medium is best used on jazz music or
typical movies and TV shows.
Large:
Large is ideal for recordings that were
recorded in large spaces. (e.g. orchestral
recordings or action movies with big
explosions.)
Speech:
Speech is ideal for recordings which are
mostly dialog (e.g. news broadcast), and
that have virtually no inherent spatial
information.
0You can set this when the sound mode is set to Auro-3D.
0This cannot be set if the input signal contains Auro-3D signals containing a
Height channel.
oAuro-Matic 3D Strength
Changes the level of the up-mixed channels in relation to the original
input signal.
The value ranges from 1 (no up-mixing) to 16 (Maximum level,
providing maximum effect).
1 - 16 (Default:10)
0You can set this when the sound mode is set to Auro-3D.
0This cannot be set if the input signal contains Auro-3D signals containing a
Height channel.
Contents Connections Playback Settings Tips Appendix
174
Front panel Display Rear panel Remote Index

oDelay Time
Adjust the audio delay time against video to extend the sound field
image.
0 ms – 300 ms (Default: 30 ms)
0You can set this when the sound mode is “Matrix”.
oEffect Level
Adjust the sound effect level of the current sound mode.
1 – 15 (Default: 10)
0Set to a lower level if the positioning and sense of phase of the surround
signals seems unnatural.
oRoom Size
Determine size of acoustic environment.
Small: Simulate acoustics of a small room.
Medium small: Simulate acoustics of a medium-small
room.
Medium
(Default):Simulate acoustics of a medium room.
Medium large: Simulate acoustics of a medium-large
room.
Large: Simulate acoustics of a large room.
0“Room Size” does not indicate the size of the room in which sources are
played.
Contents Connections Playback Settings Tips Appendix
175
Front panel Display Rear panel Remote Index

oSpeaker Select
Makes settings for the speakers outputting sound.
Floor: Plays back without height speakers.
Floor & Height
(Default):Plays back with height speakers.
0This can be set when the sound mode is the original sound mode.
oSubwoofer
Turn subwoofer output on and off.
On
(Default):The subwoofer is used.
Off: The subwoofer is not used.
0You can set this when the sound mode is “Direct” or “Stereo” and in the menu
“Subwoofer Mode” is set to “LFE+Main”. (v p. 231)
oSet Defaults
The “Surround Parameter” settings are returned to the default settings.
Contents Connections Playback Settings Tips Appendix
176
Front panel Display Rear panel Remote Index

Restorer
Compressed audio formats such as MP3, WMA (Windows Media Audio)
and MPEG-4 AAC reduce the amount of data by eliminating signal
components that are hard for the human ear to hear. The “Restorer”
function generates the signals eliminated upon compression, restoring the
sound to conditions near those of the original sound before compression.
It also restores the original bass characteristics for a rich and expanded
tonal range.
oMode
High:
Optimized mode for compressed sources
with very weak highs (64 kbps and
under).
Medium:
Apply suitable bass and treble boost for
all compressed sources (96 kbps and
under).
Low: Optimized mode for compressed sources
with normal highs (96 kbps and over).
Off: Do not use “Restorer”.
0This item can be set with analog signals or PCM signal (Sample Rate =
44.1/48 kHz) is input.
0This item default setting for “HEOS Music” is “Low”. All others are set to “Off”.
0This cannot be set when the sound mode is set to “Direct” or “Pure Direct”.
0“Restorer” settings are stored for each input source.
Contents Connections Playback Settings Tips Appendix
177
Front panel Display Rear panel Remote Index

Audio Delay
Compensates for incorrect timing between video and audio.
0Audio Delay for game mode can be set when “Video Mode” is set to “Auto” or
“Game”. (v p. 193)
0“Audio Delay” settings are stored for each input source.
oAuto Lip Sync
Automatically adjusts the audio processing time to compensate for
delays in audio/video timing from TV compatible with Auto Lip Sync.
On
(Default):Correct automatically.
Off: Do not correct automatically.
0Automatic correction may not be performed depending on the specifications of
your TV even when “Auto Lip Sync” is set to “On”.
oAdjust
The timing mismatch between the picture and sound needs to be
corrected manually.
0 ms – 500 ms (Default : 0 ms)
0You can also finely adjust the delay correction value set by “Auto Lip Sync”.
0Adjust for game mode can be set when “Video Mode” is set to “Auto” or
“Game”. (v p. 193)
Contents Connections Playback Settings Tips Appendix
178
Front panel Display Rear panel Remote Index

Volume
Set the MAIN ZONE (room where the unit is located) volume setting.
oScale
Set how volume is displayed.
0 - 98
(Default):Display in the range 0 (Min) to 98.
–79.5 dB – 18.0 dB: Display ---dB (Min), in the range –79.5 dB
to 18.0 dB.
0“Scale” settings are reflected in all the zones.
oLimit
Make a setting for maximum volume.
60 (–20 dB) / 70 (–10 dB) / 80 (0 dB)
Off (Default)
0The dB value is displayed when the “Scale” setting is “ –79.5 dB – 18.0
dB”. (v p. 179)
oPower On Level
Define the volume setting that is active when the power is turned on.
Last
(Default):
Use the memorized setting from the last
session.
Mute: Always use the muting on condition when
power is turned on.
1 – 98 (–79 dB – 18 dB) : The volume is adjusted to the set level.
0The dB value is displayed when the “Scale” setting is “ –79.5 dB – 18.0
dB”. (v p. 179)
oMute Level
Set the amount of attenuation when muting is on.
Full
(Default):The sound is muted entirely.
–40 dB : The sound is attenuated by 40 dB down.
–20 dB : The sound is attenuated by 20 dB down.
Contents Connections Playback Settings Tips Appendix
179
Front panel Display Rear panel Remote Index

Audyssey®
Set Audyssey MultEQ® XT32, Audyssey Dynamic EQ®, Audyssey
Dynamic Volume® and Audyssey LFC™. These can be selected after
Audyssey® Setup has been performed.
For additional information on Audyssey technology, please see
“Explanation of terms” (v p. 305).
0“MultEQ® XT32”, “Dynamic EQ”, “Reference Level Offset”, “Dynamic Volume”,
“Audyssey LFC™” and “Containment Amount” settings are stored for each input
source.
0When the sound mode is in the “Direct” or “Pure Direct” mode, “MultEQ® XT32”,
“Dynamic EQ”, “Dynamic Volume” and “Audyssey LFC™” settings cannot be
configured.
oMultEQ® XT32
MultEQ® XT32 compensates for both time and frequency
characteristics of the listening area based on Audyssey® Setup
measurement results. Selection is done from three types of
compensation curves. We recommend the “Reference” setting.
Reference
(Default):
Selects the default calibrated setting with
a slight roll off at high frequencies, which
is optimized for movies.
L/R Bypass:
Selects the reference setting, but
bypasses MultEQ® XT32 on the front left
and right speakers.
Flat:
Selects the calibrated setting which is
optimized for small rooms where your
listening position is closer to the
speakers.
Off: Do not use “MultEQ® XT32”.
0When using headphones, “MultEQ® XT32” is automatically set to “Off”.
Contents Connections Playback Settings Tips Appendix
180
Front panel Display Rear panel Remote Index

oDynamic EQ
Solves the problem of deteriorating sound quality as volume is
decreased by taking into account human perception and room
acoustics.
Works with MultEQ® XT32.
On
(Default):Use Dynamic EQ.
Off: Do not use Dynamic EQ.
0When the menu “Dynamic EQ” setting is “On”, it is not possible to do “Tone”
adjustment. (v p. 133)
oReference Level Offset
Audyssey Dynamic EQ® is referenced to the standard film mix level. It
makes adjustments to maintain the reference response and surround
envelopment when the volume is turned down from 0 dB. However,
film reference level is not always used in music or other non-film
content. Dynamic EQ Reference Level Offset provides three offsets
from the film level reference (5 dB, 10 dB, and 15 dB) that can be
selected when the mix level of the content is not within the standard.
Recommended setting levels for content are shown below.
0 dB (Film Reference)
(Default):Optimized for content such as movies.
5 dB :
Select this setting for content that has a
very wide dynamic range, such as
classical music.
10 dB :
Select this setting for jazz or other music
that has a wider dynamic range. This
setting should also be selected for TV
content as that is usually mixed at 10 dB
below film reference.
15 dB :
Select this setting for pop/rock music or
other program material that is mixed at
very high listening levels and has a
compressed dynamic range.
0Setting is enabled when “Dynamic EQ” is “On”. (v p. 181)
Contents Connections Playback Settings Tips Appendix
181
Front panel Display Rear panel Remote Index

oDynamic Volume
Solves the problem of large variations in volume level between TV,
movies and other content (between quiet passages and loud
passages, etc.) by automatically adjusting to the user’s preferred
volume setting.
Works with MultEQ® XT32.
Heavy: Most adjustment to softest and loudest
sounds.
Medium: Medium adjustment to loudest and
softest sound.
Light: Least adjustment to loudest and softest
sounds.
Off
(Default):Do not use Dynamic Volume.
0If “Dynamic Volume” is set to “Yes” in “Audyssey® Setup”, the setting is
automatically changed to “Medium”. (v p. 204)
oAudyssey LFC™
Adjusts the low frequency band to prevent bass and vibration from
being conveyed to neighboring rooms.
Works with MultEQ® XT32.
On: Use “Audyssey LFC™”.
Off
(Default):Do not use “Audyssey LFC™”.
oContainment Amount
Adjusts the amount of low frequency containment. Use higher settings
if you have close neighbors.
1 – 7 (Default : 4)
0This can be set when “Audyssey LFC™” in the menu is set to “On”.
Contents Connections Playback Settings Tips Appendix
182
Front panel Display Rear panel Remote Index

Graphic EQ
Uses the graphic equalizer to adjust the tone of each speaker.
0Speakers for which “Graphic EQ” can be set differ according to the sound mode.
0This can be set when “MultEQ® XT32” setting is “Off”. (v p. 180)
0This cannot be set when the sound mode is set to “Direct” or “Pure Direct”.
0If you are using headphones, you can set the equalizer for headphones.
(v p. 183)
oGraphic EQ / Headphone EQ
Set whether to use the graphic equalizer or not.
On: Use the graphic equalizer.
Off
(Default):Do not use the graphic equalizer.
0“Headphone EQ” is set in the menu when headphones are used.
oSpeaker Selection
Select whether to adjust tones for individual speakers or for all
speakers.
All: Adjust all speaker tones together.
Left/Right
(Default):
Adjust the left and right speaker tones
together.
Each: Adjust the tone for each speaker.
oAdjust EQ
Adjust tonal balance for each frequency band.
1. Select the speaker.
2. Select the adjustment frequency band.
63 Hz / 125 Hz / 250 Hz / 500 Hz / 1 kHz / 2 kHz / 4 kHz / 8 kHz /
16 kHz
3. Adjust the level.
–20.0 dB – +6.0 dB (Default: 0.0 dB)
0Front Dolby, Surround Dolby and Back Dolby speakers can only be set when
63 Hz/125 Hz/250 Hz/500 Hz/1 kHz.
Contents Connections Playback Settings Tips Appendix
183
Front panel Display Rear panel Remote Index

oCurve Copy
Copy the Flat correction curve created in Audyssey® Setup.
0“Curve Copy” is displayed after Audyssey® Setup has been performed.
0“Curve Copy” cannot be used when using headphones.
oSet Defaults
The “Graphic EQ” settings are returned to the default settings.
Contents Connections Playback Settings Tips Appendix
184
Front panel Display Rear panel Remote Index

Video
Make video-related settings.
Picture Adjust
Picture quality can be adjusted.
0Can be set when the “Video Conversion” setting is “On”. (v p. 193)
0Can be set when “HDMI”, “COMP” or “VIDEO” is assigned for each input source.
(v p. 200)
0“Contrast”, “Brightness”, “Saturation”, “Noise Reduction” and “Enhancer” can be
set when “Picture Mode” is set to “Custom”. (v p. 185)
0“Picture Adjust” settings are stored for each input source.
0“Picture Adjust” cannot be set when 4K signals are input.
oPicture Mode
Select the desired picture mode according to the video content and
your viewing environment.
Standard: The standard mode suited for most living
room viewing environments.
Movie: A mode suited for watching movies in a
dark room such as a theater room.
Vivid: A mode that makes graphic images for
games, etc. brighter and more vivid.
Streaming: A mode suited for low bit rate video
sources.
ISF Day: A mode suited for watching movies in a
bright room during the day.
ISF Night: A mode suited for watching movies in a
dark room at night.
Custom: Adjusts the picture quality manually.
Off
(Default):
No picture quality adjustment is done with
this unit.
Contents Connections Playback Settings Tips Appendix
185
Front panel Display Rear panel Remote Index

0The two special adjustment modes, “ISF Day” and “ISF Night”, should be used
by a certified technician to adjust the color calibration to match the installation
conditions.
We recommend that the settings and adjustments be carried out by an ISF-
certified technician.
0These settings can also be configured using “Picture Mode” in the option
menu. (v p. 185)
oContrast
Adjust picture contrast.
-50 – +50 (Default : 0)
oBrightness
Adjust picture brightness.
-50 – +50 (Default : 0)
oSaturation
Adjust picture chroma level (color saturation).
-50 – +50 (Default : 0)
oNoise Reduction
Reduce overall video noise.
Low / Medium / High / Off (Default : Off)
oEnhancer
Emphasize picture sharpness.
0 – +12 (Default : 0)
Contents Connections Playback Settings Tips Appendix
186
Front panel Display Rear panel Remote Index

HDMI Setup
Make settings for HDMI Audio Out, HDMI Pass Through and HDMI
Control settings.
NOTE
0When “HDMI Pass Through” and “HDMI Control” is set to “On”, it consumes more
standby power. (“HDMI Pass Through” (v p. 187), “HDMI Control” (v p. 189))
If you are not using this unit for an extended period, it is recommended that you
unplug the power cord from the power outlet.
oHDMI Audio Out
Select HDMI audio output device.
AVR
(Default):
Play back through speakers connected to
the unit.
TV: Play back through TV connected to the
unit.
0When the HDMI Control function is activated, priority is given to the TV audio
setting. (v p. 149)
0When the power of this unit is on and “HDMI Audio Out” is set to “TV”, audio is
output as 2-channel from the HDMI OUT connector.
oHDMI Pass Through
Selects how this unit will transmit HDMI signals to the HDMI output in
standby power mode.
On
(Default):
Transmits the selected HDMI input
through this unit’s HDMI output when this
unit is in standby power mode.
Off:
No HDMI signals are transmitted through
this unit’s HDMI output in standby power
mode.
Contents Connections Playback Settings Tips Appendix
187
Front panel Display Rear panel Remote Index

oPass Through Source
Sets the HDMI connector that inputs HDMI signals when in standby.
Last: The most recently used input source will
go into standby mode.
CBL/SAT / DVD /
Blu-ray / Game /
AUX1 / AUX2 /
Media Player / CDz
(Default : CBL/SAT):
Pass through the selected input source.
z“Pass Through Source” can be set when any of the HDMI
connectors is assigned to “CD” for the input source in the “Input
Assign” setting. (v p. 199)
0“Pass Through Source” can be set when “HDMI Control” is set to “On” or
“HDMI Pass Through” is set to “On”. (“HDMI Pass Through” (v p. 187),
“HDMI Control” (v p. 189))
oRC Source Select
Set whether to allow this unit to be turned on by the input source select
button on the remote control when this unit is on standby.
Power On + Source
(Default):
The power of this unit is turned on and
the input source changes.
Source Select Only:
The HDMI input source changes while
this unit is on standby. The power display
of this unit blinks when the input source
select button of the remote control is
pressed.
0“RC Source Select” can be set when “HDMI Control” is set to “On” or “HDMI
Pass Through” is set to “On”. (“HDMI Pass Through” (v p. 187), “HDMI
Control” (v p. 189))
Contents Connections Playback Settings Tips Appendix
188
Front panel Display Rear panel Remote Index