Denon DN-HC1000S - Serato Scratch Live Sub... User manual

Copyright 2009 D&M Holdings Inc. All rights reserved.
WARNING: Violators will be prosecuted to the maximum extent possible.
●For purposes of improvement, specifications and design are subject to change without notice.
●Please use this service manual with referring to the operating instructions without fail.
●Some illustrations using in this service manual are slightly different from the actual set.
SERVICE MANUAL
USB MIDI CONTROLLER
MODEL JP E3 E2 EK E2A E2C E1K EUT
DN-HC1000S
33
Ver. 2
S0013-1V02DM/DG0911
Please refer to the
MODIFICATION NOTICE.

2
Please heed the points listed below during servicing and inspection.
◎ Heed the cautions!
Spots requiring particular attention when servicing, such
as the cabinet, parts, chassis, etc., have cautions indicated
on labels or seals. Be sure to heed these cautions and the
cautions indicated in the handling instructions.
◎ Caution concerning electric shock!
(1) An AC voltage is impressed on this set, so touching in-
ternal metal parts when the set is energized could
cause electric shock. Take care to avoid electric shock,
by for example using an isolating transformer and
gloves when servicing while the set is energized, un-
plugging the power cord when replacing parts, etc.
(2)There are high voltage parts inside. Handle with extra
care when the set is energized.
◎ Caution concerning disassembly and
assembly!
Though great care is taken when manufacturing parts from
sheet metal, there may in some rare cases be burrs on the
edges of parts which could cause injury if fingers are
moved across them. Use gloves to protect your hands.
◎ Only use designated parts!
The set's parts have specific safety properties (fire resis-
tance, voltage resistance, etc.). For replacement parts, be
sure to use parts which have the same properties. In par-
ticular, for the important safety parts that are marked zon
wiring diagrams and parts lists, be sure to use the desig-
nated parts.
◎ Be sure to mount parts and arrange
the wires as they were originally!
For safety reasons, some parts use tape, tubes or other in-
sulating materials, and some parts are mounted away from
the surface of printed circuit boards. Care is also taken with
the positions of the wires inside and clamps are used to
keep wires away from heating and high voltage parts, so
be sure to set everything back as it was originally.
◎ Inspect for safety after servicing!
Check that all screws, parts and wires removed or discon-
nected for servicing have been put back in their original po-
sitions, inspect that no parts around the area that has been
serviced have been negatively affected, conduct an insu-
lation check on the external metal connectors and between
the blades of the power plug, and otherwise check that
safety is ensured.
(Insulation check procedure)
Unplug the power cord from the power outlet, disconnect
the antenna, plugs, etc., and turn the power switch on. Us-
ing a 500V insulation resistance tester, check that the in-
sulation resistance between the terminals of the power
plug and the externally exposed metal parts (antenna ter-
minal, headphones terminal, microphone terminal, input
terminal, etc.) is 1MΩor greater. If it is less, the set must
be inspected and repaired.
Concerning important safety
parts
Many of the electric and structural parts used in the set
have special safety properties. In most cases these prop-
erties are difficult to distinguish by sight, and using re-
placement parts with higher ratings (rated power and
withstand voltage) does not necessarily guarantee that
safety performance will be preserved. Parts with safety
properties are indicated as shown below on the wiring dia-
grams and parts lists is this service manual. Be sure to re-
place them with parts with the designated part number.
(1) Schematic diagrams ... Indicated by the zmark.
(2) Parts lists ... Indicated by the zmark.
Using parts other than the designated
parts could result in electric shock, fires or
other dangerous situations.
SAFETY PRECAUTIONS
The following check should be performed for the continued protection of the customer and service technician.
LEAKAGE CURRENT CHECK
Before returning the unit to the customer, make sure you make either (1) a leakage current check or (2) a line to chassis
resistance check. If the leakage current exceeds 0.5 milliamps, or if the resistance from chassis to either side of the
power cord is less than 460 kohms, the unit is defective.
CAUTION
CAUTION

3
DIMENSION
25 mm
250 mm
88 mm

4
HOW TO CHECK FIRMWARE VERSION?
(1) Press the Shift and FWD button at the same time, then connect HC1000S to PC with USB cord to check the light
buttons that represent Firmware version.
Firmware Version Leds (Ver X .YZ)
※The first release is "Ver 1.17".
(2) Press the Shift button to retrurn to Normal Mode.
FIRMWARE UPDATE
Use the procedure described below to update the firmware to a newer version.
(1) Press the BACK and FWD button at the same time, then connect DN-HC1000S to PC.
(2) DN-HC1000S will enter updating mode. CUE-1(A, B) will light to indicate "Update Ready."
(3) PC Operation System will pop-up a new hard disc, named DN-HC1000S.
(4) Copy updated file (EX: DN-HC1000S_v1.13.bin), and paste on "DN-HC1000S" hard disc.
(5) It will start updating. After updating successfully, DN-HC1000S will switch to Midi Controller automatically.
(6) Firmware updating State:
CUE-1(A, B): Update Ready
CUE-2(A, B): Update Data(0%)
CUE-3(A, B): Update Data(50%)
CUE-4(A, B): Update Data(100%)
CUE-5(A, B): Update Success (* If it doesn't light, it means "Updating Error")
ALL LED LIGHT UP
(1) Press the BACK and SHFT button at the same time, then connect DN-HC1000S to PC.
X: 1(Auto Loop), 2(IN), 3(OUT), 4(TAP)
Y: 1(CUE1), 2(CUE2),3(CUE3),4(CUE4),5(CUE5)
Z: 1(CUE1),2(CUE2),3(CUE3),4(CUE4),5(CUE5),
6(Auto Loop),7(IN),8(OUT),9(TAP)

5
TROUBLE SHOOTING
FLOW CHART NO.1䇭
(
MAIN UNIT
)
FLOW CHART No.2䇭
(
MAIN UNIT
)
FLOW CHART No.3䇭
(
MAIN䇭UNIT
)
The power cannot be turned on.
No
Yes
Is the USB cable or the USB terminal of the PC
side normal?
Is normal state restored when once unplugged USB cord is plugged
again?
Check JK101 and the periphery circuit, and replace it if defective.
+3.3V is not outputted.
Is the +5V line voltage normal?
Yes
Refer to FLOW CHART NO.1 [The power
cannot be turned on.]
Check IC105 and the periphery circuit, and replace it if defective.
The key operation is not functioning.
A
re the contact point and the installation state of the key switches
䋨SW101~SW146 䋩normal?
Yes
Re-install the switches (SW101~SW146)
correctly or replace the poor switch.
Does LED 䋨D101A䌾D118A䇮D101B䌾D118B䋩light correctly ? Check Q101䌾Q118 and the periphery circuit,
and replace it if defective.
When pressing each key switches, do the voltage of each pin of
IC101(shown below) decrease?
䇭SW143,SW144,SW145,SW146 : IC101 34pin
SW136,SW137,SW138,SW139,SW140,SW141,SW142 : IC101 35pin
SW129,SW130,SW131,SW132,SW133,SW134,SW135 : IC101 36pin
SW122,SW123,SW124,SW125,SW126,SW127,SW128 : IC101 37pin
SW115,SW116,SW117,SW118,SW119,SW120,SW121 : IC101 38pin
SW108,SW109,SW110,SW111,SW112,SW113,SW114 : IC101 39pin
SW101,SW102,SW103,SW104,SW105,SW106,SW107 : IC101 40pin
Yes
Replace IC101.
Yes
Check the key switches 䋨SW101䌾SW146䋩
and their periphery, and service it if detective.
No
No
No
No

6
SEMICONDUCTORS
Only major semiconductors are shown, general semiconductors etc. are omitted to list.
The semiconductor which described a detailed drawing in a schematic diagram are omitted to list.
1. IC’s
MC9S08JM32 (IC101)
PTF2/TPM1CH4
1
2
3
4
5
6
7
8
RESET
PTF0/TPM1CH2
PTF3/TPM1CH5
PTF4/TPM2CH0
PTC6
PTF7
VUSB33
USBDP
USBDN
VSS
VDD
PTE7/SS1
PTE6/SPSCK1
PTB7/ADP7
PTD0/ADP8/ACMP+
PTD1/ADP9/ACMP–
VDDAD
VREFH
PTB1/MOSI2/ADP1
PTB6/ADP6
PTD5 PTG2/KBIP6
PTC5/RxD2
PTG4/XTAL
BKGD/MS
PTG3/KBIP7
PTD2/KBIP2/ACMPO
PTD6
PTD7
43
42
41
40
39
38
18 19 20 21 22 23
505152535455
17 32
33
49
48
64
9
PTF5/TPM2CH1
10
PTF6
11
PTE0/TxD1
16
PTE3/TPM1CH1
PTG0/KBIP0
24
PTG1/KBIP1
25
PTA0
26
PTA1
27
PTB5/KBIP5/ADP5
37
PTB4/KBIP4/ADP4
36
PTB3/SS2/ADP3
35
PTB2/SPSCK2/ADP2
34
PTG5/EXTAL
56
VSSOSC
57
PTC0/SCL
58
PTC1/SDA
59
PTF1/TPM1CH3
12
PTE1/RxD1
13
14
15
PTE2/TPM1CH0
PTA2
28 29 30 31
VREFL
44
45
46
VSSAD
47
PTC3/TxD2
63 62 61
PTC2
60
PTC4
IRQ/TPMCLK
PTE4/MISO1 PTE5/MOSI1
PTA3 PTA4
PTB0/MISO2/ADP0
PTA5
PTD4/ADP11 PTD3/KBIP3/ADP10
64-Pin QFP/LQFP

7
MC9S08JM32 Block Diagram
PTD4/ADP11
PTD5
PTD6
PTC1/SDA
PTC0/SCL
VSS
VDD
PTE3/TPM1CH1
PTE2/TPM1CH0
PTA5– PTA0
PTE0/TxD1
PTE1/RxD1
PTD1/ADP9/ACMP–
PTD0/ADP8/ACMP+
PTC6
PTC5/RxD2
PTC4
PTC3/TxD2
PTC2
PORT A
PORT C
PORT D
PORT E
8-BIT KEYBOARD
INTERRUPT MODULE (KBI)
IIC MODULE (IIC)
8-/16-BIT SERIAL PERIPHERAL
INTERFACE MODULE (SPI1)
USER Flash (IN BYTES)
USER RAM (IN BYTES)
ON-CHIP ICE AND
DEBUG MODULE (DBG)
MC9S08JM60 = 60,912
HCS08 CORE
CPUBDC
NOTES:
1. Port pins are software configurable with pullup device if input port.
2. Pin contains software configurable pullup/pull-down device if IRQ is enabled
(IRQPE = 1). Pull-down is enabled if rising edge detect is selected (IRQEDG = 1)
3. IRQ does not have a clamp diode to V
DD
. IRQ must not be driven above V
DD
.
4. Pin contains integrated pullup device.
5. When pin functions as KBI (KBIPEn = 1) and associated pin is configured to enable the
pullup device, KBEDGn can be used to reconfigure the pullup as a pull-down device.
2-CHANNEL TIMER/PWM
MODULE (TPM2)
PTB5/KBIP5/ADP5
PORT B
PTE5/MOSI1
PTE4/MISO1
PTE6/SPSCK1
PTE7/SS1
HCS08 SYSTEM CONTROL
RESETS AND INTERRUPTS
MODES OF OPERATION
POWER MANAGEMENT
VOLTAGE
REGULATOR
COP IRQ LVD
LOW-POWER OSCILLATOR
MULTI-PURPOSE CLOCK
GENERATOR (MCG)
RESET
VSSAD
VDDAD
VREFH
ANALOG-TO-DIGITAL
CONVERTER (ADC)
6-CHANNEL TIMER/PWM
MODULE (TPM1)
PTD7
6
PTB4/KBIP4/ADP4
PTG3/KBIP7
PTG2/KBIP6
PORT G
12-CHANNEL, 12-BIT
BKGD/MS
PTF3/TPM1CH5
PTF2/TPM1CH4
PTF0/TPM1CH2
PTF1/TPM1CH3
PORT F
PTF5/TPM2CH1
PTF4/TPM2CH0
PTF6
PTF7
INTERFACE MODULE (SCI1)
SERIAL COMMUNICATIONS
INTERFACE MODULE (SCI2)
SERIAL COMMUNICATIONS
PTG0/KBIP0
PTG1/KBIP1
MC9S08JM32 = 32,768
VREFL
PTG4/XTAL
PTG5/EXTAL
IRQ/TPMCLK RxD2
TxD2
SDA
SCL
8
KBIPx
KBIPx
TPMCLK
SPSCK1
SS1
MISO1
MOSI1
TPMCLK
TPM1CH1
TPM1CH0
RxD1
TxD1
EXTAL
XTAL
4
4
USB SIE
USB ENDPOINT
RAM
FULL SPEED
USB
TRANSCEIVER
USBDP
USBDN
MISO2
SS2
SPSCK2
MOSI2 PTB1/MOSI2/ADP1
PTB0/MISO2/ADP0
PTB7/ADP7
PTB6/ADP6
8-/16-BIT SERIAL PERIPHERAL
INTERFACE MODULE (SPI2)
REAL-TIME COUNTER
(RTC)
PTB3/SS2/ADP3
PTB2/SPSCK2/ADP2
TPM1CHx
4
TPM2CH1
TPM2CH0
4
ANALOG COMPARATOR
(ACMP)
SYSTEM
USB 3.3-V VOLTAGE REGULATOR
VUSB33
MC9S08JM60 = 4096
MC9S08JM32 = 2048
ACMPO
ACMP+
ACMP–
PTD3/KBIP3/ADP10
PTD2/KBIP2/ACMPO
V
SSOSC

8
74AHC595DR (IC102, 103, 104)
handbook, halfpage
MNA553
15
9
1
2
3
4
5
6
7
1D 2D
C1/
10
11
14
C2
12
13 EN3
SRG8
R
3
Fig.3 IEC logic symbol.
handbook, halfpage
MNA554
3-STATE OUTPUTS
8-BIT STORAGE REGISTER
8-STAGE SHIFT REGISTER
Q0Q1Q2Q3Q4Q5Q6Q7
Q7'
14
151234567
9
DS
SHCP
STCP
OE
11
10
12
13
MR
Fig.4 Functional diagram.
handbook, full pagewidth
STAGE 0 STAGES 1 TO 6 STAGE 7
FF0
D
CP
Q
R
LATCH
D
CP
Q
FF7
D
CP
Q
R
LATCH
D
CP
Q
MNA555
DQ
Q1Q2Q3Q4Q5Q6Q7
Q7'
Q0
DS
STCP
SHCP
OE
MR
Fig.5 Logic diagram.

9
BLOCK DIAGRAM
MCU
ENCODER
LED
LED DRIVER
74595
USB JACK
MC9S08JM32
KEY
1 2

10
PRINTED WIRING BOARD
CONTROL PWB UNIT
COMPONENT SIDE
FOIL SIDE

11
NOTE FOR PARTS LIST
Parts for which "nsp" is indicated on this table cannot be supplied.
When ordering of part, clearly indicate "1" and "I" (i) to avoid mis-supplying.
Ordering part without stating its part number can not be supplied.
Not including General-purpose Carbon Chip Resistor in the P.W.Board parts list. (Refer to the Schematic Diagram for those parts.)
Parts marked with this symbol zhave critical characteristics.
Use ONLY replacement parts recommended by the manufacturer.
Not including General-purpose Carbon Film Resistor in the P.W.Board parts list. (Refer to the Schematic Diagram for those parts.)
Part indicated with the mark "★" is not illustrated in the exploded view.
WARNING:
1.
2.
3.
4.
5.
6.
●Resistors
RD : Carbon
RC : Composition
RS : Metal oxide film
RW: winding
RN : Metal film
RK : Metal mixture
P : Pulse-resistant type
NL : Low noise type
NB : Non-burning type
FR : Fuse-resistor
F : Lead wire forming
2B : 1/8 W
2E : 1/4 W
2H : 1/2 W
3A : 1 W
3D : 2 W
3F : 3 W
3H : 5 W
F:±1%
G:±2%
J:±5%
K:±10%
M:±20%
Ex.: RN
Type
14K
Shape
and per-
formance
2E
Power
182
Resist-
ance
G
Allowable
error
FR
Others
*Resistance
1800ohm=1.8kohm18 2
Indicates number of zeros after effective number.
2-digit effective number.
1.2ohm1R 2
2-digit effective number, decimal point indicated by R.
1-digit effective number.
: Units: ohm
●Capacitors
CE : Aluminum foil
electrolytic
CA : Aluminium solid
electrolytic
CS : Tantalum electrolytic
CQ : Film
CK : Ceramic
CC : Ceramic
CP : Oil
CM: Mica
CF : Metallized
CH : Metallized
HS : High stability type
BP : Non-polar type
HR : Ripple-resistant type
DL : For change and discharge
HF : For assuring high requency
U : UL part
C : CSA part
W : UL-CSA part
F : Lead wire forming
0J : 6.3 V
1A : 10 V
1C : 16 V
1E : 25 V
1V : 35 V
1H : 50 V
2A : 100 V
2B : 125 V
2C : 160 V
2D : 200 V
2E : 250 V
2H : 500 V
2J : 630 V
F:±1%
G:±2%
J:±5%
K:±10%
M:±20%
Z:±80%
: - 20%
P : +100%
C:±0.25pF
D:±0.5pF
= : Others
Ex.: CE
Type
04W
Shape
and per-
formance
1H
Dielectric
strength
3R2
Capacity
M
Allowable
error
BP
Others
･Units:μF.
2200μF22 2
Indicates number of zeros after effective number.
2-digit effective number.
･Units:μF.
2.2μF2R 2
2-digit effective number, decimal point indicated by R
1-digit effective number.
*Capacity (electrolyte only)
･When the dielectric strength is indicated in AC,"AC" is included after the dieelectric strength value.
*Capacity (except electrolyte)
･Units:pF
2200pF=0.0022μF22 2
Indicates number of zeros after efective number.
(More than 2)
2-digit effective number.
･Units:pF
220pF22 1
2-digit effective number.
Indicates number of zeros after effective numver.
(0 or 1)

12
PARTS LIST OF P.W.B. UNIT
＊Parts for which "nsp" is indicated on this table cannot be supplied.
＊The parts listed below are for maintenance only, might differ from the parts used in the unit in appearances or dimensions.
CONTROL PWB ASS'Y
Ref. No. Part No. Part Name Remarks Q'ty New
SEMICONDUCTORS GROUP
IC101 941243003250P CONTROL IC ASS'Y
IC(MC9S08JM32,LQFP-64P)
704-HC1000-8757
IC102-IC104 00D9587058709 IC(74AHC595DR,SOP-16) 417-HDJ9800-643 *
IC105 00D9587058204 IC(BA033FP-E2,TO-252-3)
417-CTB200-500 *
IC106 941239003100S IC(BD4740G)
417-9000-740 *
Q101-Q118 00D9587057700 TRANSISTOR(DTC114EKAT146,SMT3)
416-HDJ2460-234
D101A 941263002620S CHIP LED(JA-3020YG,3*2,YELLOW/GREEN) 410-MIX101-374 *
D101B 941263002620S CHIP LED(JA-3020YG,3*2,YELLOW/GREEN)
410-MIX101-374 *
D101-D107 nsp SWITCHING DIODE(1SS355,UMD2,SMD,TAPING)
414-CD1000-075
D102A,D103A 941263002610S CHIP LED(YELLOW,JA-3020Y,3*2) 410-F300-377 *
D102B,D103B 941263002610S CHIP LED(YELLOW,JA-3020Y,3*2)
410-F300-377 *
D104A 941263003110S CHIP LED(JA-3020R,3*2,RED)
410-MIX101-373 *
D104B 941263003110S CHIP LED(JA-3020R,3*2,RED)
410-MIX101-373 *
D105A-D113A 941263002610S CHIP LED(YELLOW,JA-3020Y,3*2)
410-F300-377 *
D105B-D113B 941263002610S CHIP LED(YELLOW,JA-3020Y,3*2)
410-F300-377 *
D108-D111 nsp ESD DIODE(EDZCTE616.8B,150MW/6.93V,EMD2)
414-RMP3-285
D114A 941263003110S CHIP LED(JA-3020R,3*2,RED) 410-MIX101-373 *
D114B 941263003110S CHIP LED(JA-3020R,3*2,RED)
410-MIX101-373 *
D115A 941263002610S CHIP LED(YELLOW,JA-3020Y,3*2)
410-F300-377 *
D115B 941263002610S CHIP LED(YELLOW,JA-3020Y,3*2)
410-F300-377 *
D116A 941263002620S CHIP LED(JA-3020YG,3*2,YELLOW/GREEN)
410-MIX101-374 *
D116B 941263002620S CHIP LED(JA-3020YG,3*2,YELLOW/GREEN)
410-MIX101-374 *
D117A,D118A 941263002610S CHIP LED(YELLOW,JA-3020Y,3*2)
410-F300-377 *
D117B,D118B 941263002610S CHIP LED(YELLOW,JA-3020Y,3*2)
410-F300-377 *
D119 nsp SWITCHING DIODE(1SS355,UMD2,SMD,TAPING)
414-CD1000-075
D120 nsp DIODE(SMAJ6.0A,400W/6.0V,DO-214AC) 414-UDJ200-284
D121-D172 nsp SWITCHING DIODE(1SS355,UMD2,SMD,TAPING) 414-CD1000-075
RESISTORS GROUP
R101 nsp CHIP RESISTOR(10K OHM,1/10W,J,TP ,50V)
412-CDVD2001-534
R104,R105 nsp CHIP RESISTOR(10 OHM,1/10W,J,TP,50V) 412-810-966
R106 nsp CHIP RESISTOR(0 OHM,1/10W3,J,TP,50V) 412-CDVD2001-552
R107 nsp CHIP RESISTOR(1M OHM,1/10W,J,TP ,50V) 412-CDVD2001-546
R108 nsp CHIP RESISTOR(10K OHM,1/10W,J,TP ,50V) 412-CDVD2001-534
R110A nsp CHIP RESISTOR(100 OHM,1/10W,J,TP,50V) 412-CDVD2001-530
R110B nsp CHIP RESISTOR(100 OHM,1/10W,J,TP,50V) 412-CDVD2001-530
R111A,R112A nsp CHIP RESISTOR(150 OHM,1/10W,J,TP ,50V) 412-CD900-795
R111B,R112B nsp CHIP RESISTOR(150 OHM,1/10W,J,TP ,50V) 412-CD900-795
R113A nsp CHIP RESISTOR(270 OHM,1/10W,J,TP ,50V) 412-007USB-698
R113B nsp CHIP RESISTOR(270 OHM,1/10W,J,TP ,50V) 412-007USB-698
R114A-R122A nsp CHIP RESISTOR(150 OHM,1/10W,J,TP ,50V) 412-CD900-795
R114B-R122B nsp CHIP RESISTOR(150 OHM,1/10W,J,TP ,50V) 412-CD900-795
R123A nsp CHIP RESISTOR(270 OHM,1/10W,J,TP ,50V) 412-007USB-698
R123B nsp CHIP RESISTOR(270 OHM,1/10W,J,TP ,50V) 412-007USB-698
R124A nsp CHIP RESISTOR(150 OHM,1/10W,J,TP ,50V) 412-CD900-795
R124B, nsp CHIP RESISTOR(150 OHM,1/10W,J,TP ,50V) 412-CD900-795
R125A nsp CHIP RESISTOR(100 OHM,1/10W,J,TP,50V) 412-CDVD2001-530
R125B nsp CHIP RESISTOR(100 OHM,1/10W,J,TP,50V) 412-CDVD2001-530
R127A,R128A nsp CHIP RESISTOR(150 OHM,1/10W,J,TP ,50V) 412-CD900-795

13
R127B,R128B nsp CHIP RESISTOR(150 OHM,1/10W,J,TP ,50V) 412-CD900-795
R129 nsp CHIP RESISTOR(10K OHM,1/10W,J,TP ,50V) 412-CDVD2001-534
R130-R143 nsp CHIP RESISTOR(100 OHM,1/10W,J,TP,50V) 412-CDVD2001-530
CAPASITORS GROUP
C101-C103 nsp CHIP CAPACITOR(0.1uF/50V,Z)
413-DCM280-773
C104 941134000520S E.C.(4.7uF/25V,MINI) 413-SMX701-712
C105 nsp CHIP CAPACITOR(0.47uF/16V,Z) 413-U101-928
C106 nsp CHIP CAPACITOR(0.1uF/50V,Z) 413-DCM280-773
C107 941134001550S ELEC. CAPACITOR(10uF/25V,M)(Cd,Pb,Hg,Cr) 413-DV300-5155
C108 nsp CHIP CAPACITOR(0.1uF/50V,Z) 413-DCM280-773
C109 00D9587054907 ELEC. CAPACITOR(100uF/10V,M)(Cd,Pb,Hg,Cr) 413-HMA2200-5017
C110,C111 nsp CHIP CAPACITOR(30pF/50V,J) 413-007USB-783
C112-C117 nsp CHIP CAPACITOR(0.01uF/50V,K) 413-DCM280-771
C118-C121 nsp CHIP CAPACITOR(0.1uF/50V,Z) 413-DCM280-773
C122 941134001550S ELEC. CAPACITOR(10uF/25V,M)(Cd,Pb,Hg,Cr) 413-DV300-5155
C123 00D9587054907 ELEC. CAPACITOR(100uF/10V,M)(Cd,Pb,Hg,Cr) 413-HMA2200-5017
C124 00D9587030701 ELEC. CAPACITOR(2.2uF/50V,M)(Cd,Pb,Hg,Cr) 413-DV300-5156
OTHER PARTS GROUP
JK101 941643003230S MINI USB JACK(B TYPE)
420-HC1000S-337 *
L101 nsp INDUCTOR(10uH,AL0204ST-100K-S-A,TAPING)
415-HMD5000-097
L102 nsp BEAD CORE(TB36-863445NP T-26mm) 415-HV3500K-090
L103 nsp CHIP BEAD(ACM2012-900-2P-T) 415-FU800-305
SW101-SW143 941662001160S TACT SW(H=5mm,TAPING) 403-DCM270X-101A
SW144-SW146 941663003240S ENCODE SW(RE111F-41B1-15F-20P) 403-TU3-319 *
X101 nsp CRYSTAL(12MHz)
427-KMD3500-047 *
nsp NUT
601-1000S-043
nsp SCREW(DIA. 2*5 P=0.4) 602-DD2220-301
Ref. No. Part No. Part Name Remarks Q'ty New

14
EXPLODED VIEW
A
Parts marked with this symbol have critical
characteristics.
Use ONLY replacement parts recommended by
the manufacturer.
WARNING:

15
PARTS LIST OF EXPLODED VIEW
＊Parts for which "nsp" is indicated on this table cannot be supplied.
＊
P.W.B. ASS'Y for which "nsp" is indicated on this table cannot be supplied. When repairing the P.W.B. ASS'Y, check the board parts table and order replacement parts .
＊The parts listed below are for maintenance only, might differ from the parts used in the unit in appearances or dimensions.
Ref. No. Part No. Part Name Remarks Q'ty New
A nsp CONTROL PWB ASS'Y
704-HC1000-8755 1*
1 nsp SHIPPING LABEL-DATE LABEL(24*7mm,t=01mm)
701-H1000SEM-3655 1
2 nsp LABEL(24*8mm,t=01mm)
701-H1000SEM-3655 1
3-1 nsp GROUND PLATE
300-1000S-1775 1
3-2 nsp NUT
601-1000S-043 2
3-3 nsp SCREW(DIA. 2*5 P=0.4)
602-DD2220-301 2
4nspFRAME
100-1000S-2735 1
5 941412003130P JOG TUNING KNOB
100-1000S-2736 3*
6 941402003120P FRONT PANEL
300-1000S-1773 1*
7 nsp BASE
300-1000S-1774 1*
8 nsp USB SIGNAL WIRE
408-HC1000S-102 1
9 941411003160P SOFT KNOB
604-1000S-529 1*
10 941411003170P SOFT KNOB L
604-1000SL-530 1*
11 941411003180P SOFT KNOB R
604-1000SR-530 1*
12 nsp FOOT(PORON,BLACK, ∮15*3t)
612-HV3500K-055 4
13 nsp FIBROUS
612-1000S-348 3*
SCREWS
14 nsp SCREW(SAE1018,PTP,M2.6*L8)
602-SL24F-099 16
15 nsp SCREW(BTF2.6*9)
602-BTF2609-685B 16
16 nsp SCREW(FM2*5)
602-ISOF2005-686B 1

16
PACKING VIEW
PARTS LIST OF PACKING & ACCESSORIES
＊Parts for which "nsp" is indicated on this table cannot be supplied.
＊The parts listed below are for maintenance only, might differ from the parts used in the unit in appearances or dimensions.
Ref. No. Part No. Part Name Remarks Q'ty New
1 941533003200P POLYFOAM
506-1000S-573 2*
2 941535003210S SOFT BAG
509-1000S-267 1*
3-1 941541003220P INSTRUCTION MANUAL
502-DHC1000-2824A 1*
3-2 nsp PE BAG
505-DJ2500H-014 1
4-1 nsp USB SIGNAL WIRE
408-HC1000S-102 1
4-2 nsp POLYBAG
505-HM500A-049 1
5 941531003190P GIFT BOX
507-1000S-3126 1*
6 nsp BAR CODE
701-H1000SEM-4697 1
3-1
1
16
6
5
24-1
4-2
3-2
s

17
---MEMO---

18
NOTE FOR SCHEMATIC DIAGRAM
WARNING:
Parts marked with this symbol zhave critical characteristics.
Use ONLY replacement parts recommended by the manufacturer.
CAUTION:
Before returning the unit to the customer, make sure you
make either (1) a leakage current check or (2) a line to chassis
resistance check. If the leakage current exceeds 0.5 milliamps,
or if the resistance from chassis to either side of the
power cord is less than 460 kohms, the unit is defective.
WARNING:
DO NOT return the unit to the customer until the problem is
located and corrected.
NOTICE:
ALL RESISTANCE VALUES IN OHM. k=1,000 OHM
M=1,000,000 OHM
ALL CAPACITANCE VALUES IN MICRO FARAD.
P=MICRO-MICRO FARAD
EACH VOLTAGE AND CURRENT ARE MEASURED AT
NO SIGNAL INPUT CONDITION.
CIRCUIT AND PARTS ARE SUBJECT TO CHANGE
WITHOUT PRIOR NOTICE.

DB 6 DB 5 DB 3 DB 2
KR6
DB 1
KR5
KR4
DB 0
D108A
CUE4-A
Q1
1
Q2
2
Q3
3
Q4
4
Q5
5
Q6
6
Q7
7
GND
8DSO 9
MR 10
SHCP 11
STCP 12
OE 13
DS 14
Q0 15
VCC 16
IC102
74595
R 111A
150
R 115A
150
R 114A
150
R 113A
270
R 112A
150
C118
0.1
D103A
OUT-A
D104A
AUTO LOOP-A AUTO LOOP-A
D105A
CUE1-A
D106A
CUE2-A
D107A
CUE3-A
/O E STCP SHCP DS
D102A
IN-A
C103
0.1
C108
0.1
C123
100/10
VBUS
R107
1M
X101
12M
C110
30 P
C111
30P
R108
10K
C101 0.1
R106
0
L 101
10u H
R103
NC
R102
NC
C109
100/10
B KGD
1 2
3 4
5 6
CN101
HEADER 3X2(LPP- >NC)
/URS T
AD
R 110A
100
R 116A
150
R 117A
150
D101A
TAP-A
DB 4
SW115
BPM-A
SW116
SAMP1-3
SW117
CUE3-A
SW118
PREPARE
SW108
IN-A
SW109
L OOP -A
SW110
CUE2-A
SW111
FWD
SW112
CUE2-B
SW113
IN-B
SW114
LOOP-B
SW101
ROLL-A
SW102
AUTO LOOP-A
OOP
SW103
CUE1-A
D
SW121
BPM-B
SW119
CUE3-B
SW120
SAMP4-6
VBUS
SW104
BACK
SW105
CUE1-B
Q1
1
Q2
2
Q3
3
Q4
4
Q5
5
Q6
6
Q7
7
GND
8DS O 9
MR 10
SHCP 11
STCP 12
OE 13
DS 14
Q0 15
VC C 16
IC104
74595
R 128A
150
C120
0.1
/O E STCP SHCP
D118A
CUE5-B
R 127A
150
D117A
CUE5-A
C105
0.47
C104
4.7/10
R105
30
R104
30
CHASSIS
PTC4
1
IRQ/TPMCLK
2
RESET
3
PTF0/TPM1CH2
4
PTF1/TPM1CH3
5
PTF2/TPM1CH4
6
PTF3/TPM1CH5
7
PTF4/TPM2CH0
8
PTC6
9
PTF7
10
PTF5/TPM2CH1
11
PIF6
12
PTE0/TxD1
13
PTE1/RxD1
14
PTE2/TPM1CH0
15
PTE3/TPM1CH1
16
PTE4/MISO1
17
PTE5/MOSI1
18
PTE6/SPSCK1
19
PTE7/SS1
20
VDD
21
VSS
22
USBDN
23
USBDP
24
VUSB33
25
PTG0/KBIP0
26
PTG1/KBIP1
27
PTA0
28
PTA1
29
PTA2
30
PTA3
31
PTA4
32
PTA5
33
PTB0/MISO2/ADP0
34
PTB1/MOSI2/ADP1
35
PTB2/SPSCK2/ADP2
36
PTB3/SS2/ADP3
37
PTB4/KBIP4/ADP4
38
PTB5/KBIP5/ADP5
39
PTB6/ADP6
40
PTB7/ADP7
41
PTD0/ADP8/ACMP+
42
PTD1/ADP9/ACMP–
43
VDDAD
44
VREFH
45
VREFL
46
VSSAD
47
PTD2/KBIP2/ACMPO
48
PTD3/KBIP3/ADP10
49
PTD4/ADP11
50
PTD5
51
PTD6
52
PTD7
53
PTG2/KBIP6
54
PTG3/KBIP7
55
BKGD/MS
56
PTG4/XTAL
57
PTG5/EXTAL
58
VSSOSC
59
PTC0/SCL
60
PTC1/SDA
61
PTC2
62
PTC3/TxD2
63
PTC5/RxD2
64
IC101
MC9S08JM32
VUSB
1
D-
2
D+
3
ID
4
DGND
5
CHASSIS
6
CHASSIS
7
JK101
MINI B TYPE USB JACK
1
2 3
4
L 103
ACM201 2
L 102
BEAD
C106
0.1
C107
10/16
KR3
KR2
SW129
SEARCH F.-A
SEARCH F.-B
SW130
B.SKIP-A
SW131
CUE5-A
SW132
BROWSE
SW122 SW123
F.SKIP-A
SW124
CUE4-A
SW125
HISTORY
SW126
CUE4-B
SW127
SEARCH B.-B
SW128
SKIP F.-B
SW135
SKIPB.-B
SW133
CUE5-B
SW134
SEARCH F.-B
KR1
KR 0
SW143
SHIFT
SW136
TAP-A
SW137
OUT-A
SW138
L OAD-A
SW139
FILES
SW140
L OAD-B
SW141
OUT-B
SW142
TAP-B
SW107
AUTO LOOP-B
SW106
ROLL-B
RA1B RA1A TI1B TI1A TK1B TK1A
C 117
0.01
C 116
0.01
C 115
0.01
C 114
0.01
C 113
0.01
C 112
0.01
1 2 34
5
SW 146
LOOP OUT-B
1 2 34
5
SW 145
FILE SELECT
1 2 34
5
SW 144
LOOP OUT-A
D116A
TAP- B
Q1
1
Q2
2
Q3
3
Q4
4
Q5
5
Q6
6
Q7
7
GND
8DS O 9
MR 10
SHCP 11
STCP 12
OE 13
DS 14
Q0 15
VC C 16
IC103
74595
R119A
150
R123A
270
R122A
150
R121A
150
R120A
150
C119
0.1
D111A
IN-B
D112A
CUE2 -B
D 113A
CUE1 -B
D114A
AUTO L OOP-B
D115A
OUT-B
/O E STCP SHCP
D110A
CUE3 -B
R118A
150
R124A
150
R125A
100
D109A
CUE4-B
D116B
TAP- B
D111B
IN-B
D112B
CUE2 -B
D113B
CUE1 -B
D114B
AUTO L OOP-B
D115B
OUT-B
D110B
CUE3 -B
D109B
CUE4 -B
D108B
CUE4-A
D103B
OUT-A
D104B
D105B
CUE1-A
D106B
CUE2-A
D107B
CUE3-A
D102B
IN-A
D101B
TAP-A
D118B
CUE5-B
D117B
CUE5-A
3.3V
C122
10/16
I
G
O
IC105
BA33T
C121
0.1
VBUS
3.3V
R 110B
100
R 111B
150
R 112B
150
R 113B
270
R 114B
150
R 115B
150
R 116B
150
R 117B
150
R118B
150
R119B
150
R120B
150
R121B
150
R122B
150
R123B
270
R124B
150
R125B
100
R 127B
150
R 128B
150
KR 0
KR 1
KR 2
KR 3
KR 4
KR 5
KR 6
DB0
DB1
DB2
DB3
DB5
DB 4
DB6
TK1 A
TK1 B
TI1 A
TI1 B
RA1A
RA1B
STCP
DS SHCP /O E
R101
10K
C102 0.1
D108
EDZC6.8B
D109
EDZC6.8B
D110
EDZC6.8B
D111
EDZC6.8B
C124
2.2/50
NC 1
SUB 2
GND 3 VO
4
VCC
5
IC106
BD4740G
R129
10K
Q101
C114ES
Q102
C114ES
Q103
C114ES
Q104
C114ES
Q105
C114ES
Q106
C114ES
Q108
C114ES
Q107
C114ES
Q109
C114ES
Q110
C114ES
Q111
C114ES
Q112
C114ES
Q113
C114ES
Q114
C114ES
Q115
C114ES
Q116
C114ES
Q117
C114ES
Q118
C114ES
LED2 LED3 LED4 LED5 LED6 LED7 LED8
L ED1
L ED9
L ED10
L ED11
LED12 LED13 LED14 LED15 LED16 LED17 LED18
LED1 LED2 LED3 LED4 LED5 LED6 LED7 LED8 LED9 LED10
LED11 LED12 LED13 LED14 LED15 LED16 LED17 LED18
R 130 100 R 131 100 R 132 100 R 133 100 R 134 100 R 135 100 R 136 100 R 137 100
R138
100
R139
100
R140
100
R141
100
R142
100
R143
100
D0
D1
D2
D3 D4 D5 D6 D7A0
A1 A2 A3 A4
A5
A0 A1 A2 A3 A4 A5 D0 D1
D2 D3 D4 D5 D6 D7
DB 7
D119
1SS355
DB7
D120
SMAJ-6.0A
D121
1SS355
D122
1SS355
D123
1SS355
D124
1SS355
D125
1SS355
D126
1SS355
D127
1SS355
D128
1SS355
D129
1SS35 5
D130
1SS355
D131
1SS355
D132
1SS355
D133
1SS35 5
D134
1SS355
R109
10K(L PP- >0)
D135
1SS355
D101
1SS355
D142
1SS355
D149
1SS355
D156
1SS355
D163
1SS355
D102
1SS355
D136
1SS355
D143
1SS355
D150
1SS355
D157
1SS355
D164
1SS355
D165
1SS35 5
D103
1SS35 5
D137
1SS355
D144
1SS355
D151
1SS355
D158
1SS355
D170
1SS35 5
D171
1SS355
D172
1SS355
D166
1SS355
D159
1SS355
D152
1SS355
D145
1SS355
D138
1SS355
D104
1SS355
D167
1SS355
D160
1SS355
D153
1SS355
D146
1SS355
D139
1SS355
D105
1SS355
D168
1SS355
D161
1SS355
D154
1SS355
D147
1SS355
D140
1SS355
D106
1SS355
D107
1SS355
D141
1SS355
D148
1SS355
D155
1SS355
D162
1SS355
D169
1SS35 5
87654321
A
B
C
D
E
F
DN-HC1000S
SCHEMATIC DIAGRAMS (1/1)
CONTROL UNIT