Denon AVR-1082 User manual

■Fully Discrete, Equal Power Seven Amplifier Channels
Front.................. 150 W + 150 W (6 ohms, 1 kHz, 0.7 % THD)
Center................ 150 W (6 ohms, 1 kHz, 0.7 % THD)
Surround............ 150 W + 150 W (6 ohms, 1 kHz, 0.7 % THD)
Surround back... 150 W + 150 W (6 ohms, 1 kHz, 0.7 % THD)
The AVR-1082 features an equal power 7-channel amplifier section,
with identical amplifier design on all 7 channels, with high current discrete
output devices on all channels. Each of the 7 amplifier channels is
rated at 150 watts, into 6 ohms.
■Hefty Power Transformer for Stable Supply of Power
A huge power transformer has been connected in the power section
where it is combined with a rectifier diode and a large block capacitor
to ensure a large, stable supply of electrical current. Accordingly, the
AVR-1082 boasts high output power of 150 W for each of the 7 channels.
■High Power Custom Transistor
When temperatures rise or fall inside the unit, bias current values supplied
to the power transistor tend to fluctuate, causing sound quality to deteriorate.
The high power custom transistor used in the AVR-1082 ensures that
the bias current is constantly uniform so that the sound you hear is of
consistently stable, high quality.
■DDSC-Digital, for High-quality Sound Reproduction
Featuring the Analog Devices SHARC 32-bit floating point DSP processor,
DENON’s DDSC-D circuitry faithfully recreates all the nuances of the
original performance. Compared to ordinary 24-bit fixed point DSP
processors, the Analog Devices SHARC 32-bit floating point DSP processor
features greatly increased computational dynamic range for superior
reproduction of stereo and multi-channel digital program sources.
■Featuring DTS-ES Discrete 6.1 Decoding
The AVR-1082 is equipped with the DTS-ES (true discrete) 6.1 decoder,
developed by DTS to provide dramatically improved surround sound
panoramic reproduction and superior surround sound localization.
■ Supports DTS-ES Matrix 6.1 Decoding
■ Supports DTS NEO:6 Surround Decoding
■Featuring Dolby Pro Logic II Decoding
Enjoy 2-channel stereo recordings in stunning 5.1-channel surround playback.
The Dolby Pro Logic II decoder reproduces dynamic 5.1-channel surround
sound not only from normal 5.1-channel DVD but from 2-channel sources
such as videos and CDs, too. Dolby Pro Logic II uses matrix decoding
technology that has been dramatically improved over Pro Logic. With Pro
Logic II, for instance, the Surround (Rear) channels are in stereo (only
mono with Pro Logic) and playback covers the full frequency range (only
up to 7 kHz with Pro Logic). These improvements let you enjoy a wide
variety of 2-channel sources with the exciting effects of 5.1-channel surround
sound. In Dolby Pro Logic II, there is a Movie mode that creates a sound
space suitable for movies, a Music mode that does the same for music,
and a Pro Logic emulation feature that reproduces sound effects in the
way that conventional Pro Logic does.
■Dolby Digital Decoding
■96 kHz, 24-bit Audio D/A Converters
AVR-1082
A/V Surround Receiver
NEW MODEL INFORMATION
DTS-ES Discrete 6.1 and Dolby Pro Logic II with 7 Power Amps and Multi-room Flexibility
The AVR-1082 provides two power amps for the Surround Back channels for a total of 7 fully-discrete amps of equal power.
This powerful configuration lets you take maximum advantage of the dynamic performance that today's DTS-ES, Dolby Digital EX,
DVD-Audio, and SACD program sources offer. The Dolby Pro Logic II features lets you hear 2-channel stereo sources in realistic
5.1-channel surround sound. The AVR-1082 includes Multi Zone Output and Power Amp Assign functions that let you output
different sources to more than one room.

■Adjustable Cross-Over Switching
The AVR-1082 supports subwoofer cross-over switching with a choice
of 3 cross-over frequencies: 80, 100, and 120. This lets you more
accurately match the performance characteristics of the subwoofer to
the main speaker system.
■Wide-Range Play Capability for DVD-Audio or SACD
■8-Channel Input For DVD-Audio or SACD
■Surround A/B Speaker Switching
■Support for Multi Zone Configurations
The AVR-1082 provides a Multi Zone Output function and a Select
function that let you output different sources to multiple zones. Sources
can be selected for output to up to 1 additional zone, in addition to the
main room. Multi-room Zone can have variable pre-amp output.
The AVR-1082’s Power Amplifier Assign function lets you assign the 2
Surround Back (SB L/R) amplifier channels to instead drive the Multi-
room Zone powered speaker outputs, with 110 Watts per channel
power output capability, while still providing 5 full amplifier channels to
drive the main and surround speakers in the home theater room.
■ Personal Memory Plus
■ On Screen Display
■Easy Operation with Programmable Remote Controller
• Dot Matrix LCD (10 characters)
Since the LC display on the remote controller is a dot matrix type, the
characters are easier to read, and up to 10 characters can be displayed
at any one time.
• System Call
System Call function to execute up to 29 successive pre-assigned
commands at the single touch of a button.
• Preset Memory (Over 100 Built-in Codes)
Since the remote controller is preprogrammed with more than 100
remote control codes, you can use the AVR-1082’s remote controller
to operate not only DENON equipment but components made by other
manufacturers as well. (Some components may not be supported by
Preset Memory.)
• Back light
■Frequency Synthesis Tuning
• 40-station AM/FM Random Preset Memory Tuning
• Auto Preset Memory
■Other Features
• Cinema Equalizer
• Music Surround Modes Including 7/5-Channel Stereo
• “S” and Composite Video Switching
• Component Video Switching (2 inputs, 1 output)
• Tone Control
Input/Output Terminals For Every A/V System
■ Audio Inputs
9 Sets Analog Input ....................... PHONO, CD, TUNER, DVD, VDP, TV/DBS,
VCR-1, VCR-2/V.AUX, CDR/TAPE
1 Set 8-ch Analog EXT. Input FRONT L/R, CENTER, SURROUND L/R,
SURROUND BACK L/R, SUBWOOFER
3 Sets Digital (Optical) Input .......... OPTICAL X 3
1 Set Digital (Coaxial) Input ........... COAXIAL
■ Audio Outputs
8 Sets Analog PRE Output ............ FRONT L/R, CENTER, SURROUND L/R,
SURROUND BACK L/R, SUBWOOFER,
3 Sets Analog REC Output ............ VCR-1, VCR-2/V.AUX, CDR/TAPE
1 Set Analog Multi Zone Output ....... L/R
1 Set Digital (Optical) Output ......... OPTICAL
■ Video Inputs
2 Sets Component Video Input....... DVD, TV/DBS
5 Sets Composite Input ................. DVD, VDP, TV/DBS, VCR-1, VCR-2/V.AUX
5 Sets S-Video Input ...................... DVD, VDP, TV/DBS, VCR-1, VCR-2/V.AUX
■ Video Outputs
1 Set Component Video Output ..... MONITOR
3 Sets Composite Output ............... VCR-1, VCR-2/V.AUX, MONITOR
3 Sets S-Video Output ................... VCR-1, VCR-2/V.AUX, MONITOR
Specifications
■Power Amplifier Section
Rated output *THD figures are power amp stage values.
Front ................................. 150 W + 150 W (6 ohms, 1 kHz, 0.7 % THD)
110 W + 110 W (8 ohms, 20Hz - 20kHz, 0.05 % THD)
Center............................... 150 W (6 ohms, 1 kHz, 0.7 % THD)
110 W (8 ohms, 20Hz - 20kHz, 0.05 % THD)
Surround........................... 150 W + 150 W (6 ohms, 1 kHz, 0.7 % THD)
110 W + 110 W (8 ohms, 20Hz - 20kHz, 0.05 % THD)
Surround back.................. 150 W + 150 W (6 ohms, 1 kHz, 0.7 % THD)
110 W + 110 W (8 ohms, 20Hz - 20kHz, 0.05 % THD)
■Preamplifier Section
Input sensitivity/impedance
PHONO(MM)....................... 2.5 mV/47 kohms
CD, DVD, VDP, TV/DBS, VCR-1, VCR-2/V.AUX, CDR/TAPE
FRONT L/R, CENTER, SURROUND L/R,
SURROUND BACK............. 200 mV/47 kohms
SUBWOOFER..................... 200 mV/15 kohms
Output level/Load impedance
FRONT L/R, CENTER, SURROUND L/R, SURROUND BACK L/R, SUBWOOFER
MULTI ZONE L/R................ 1.2 V/10 kohms
VCR-1, VCR-2/V.AUX,
CDR/TAPE .......................... 200 mV/47 kohms
Frequency response............ 10 Hz - 100 kHz; +0, -3 dB
Signal-to-noise ratio ............ 102 dB
RIAA deviation..................... ±1 dB (20 Hz - 20 kHz)
Tone control ........................ Treble: ±10 dB at 10 kHz, Bass: ±10 dB at 100 Hz
■FM Section
Tuning frequency range........ 87.5 - 107.9 MHz
Usable sensitivity................. 1.0 µV (11.2 dBf)
■AM Section
Tuning frequency range ...... 522 - 1710 kHz
Usable sensitivity................. 18 µV
■General
Power supply....................... AC 120 V, 60 Hz
Power consumption............. 7.1 A
Dimensions.......................... 434 (W) x 171 (H) x 416 (D) mm
17.1” (W) x 6.7” (H) x 16.4” (D)
Weight ................................. 16.5 kg, 36.4lbs
NEW MODEL INFORMATION
AVR-1082
*Design and specifications are subject to change without notice.
*“Dolby”, “Dolby Digital”, “Pro Logic II”, and the double-D device are registered trademarks of
Dolby Laboratories Licensing Corporation.
*DTS”, “DTS-ES Extended Surround” and “Neo:6” are trademarks of Digital Theater System, Inc.
DENON ELECTRONICS (USA), INC.
19 CHAPIN ROAD, P.O. BOX 867, PINE BROOK, NJ 07058-9777 USA
TEL: [phone] www.denon.com
DENON CANADA INC.
505 APPLE CREEK BLVD. UNIT 5 MARKHAM, ONTARIO L3R 5B1 CANADA
TEL: [phone] www.denon.ca
DENON, LTD.
3-16-11 YUSHIMA, BUNKYO-KU, TOKYO 113-0034 JAPAN
12751201 A Printed in Japan