Denso BHT-700BB-CE Manual

BHT-700BB-CE
BHT-700BWB-CE
BHT-700BWBG-CE
Introduction
Preparation
Using the BHT
Charging
Troubleshooting
■Usage Precautions ..................................1
■Wireless Equipment.................................3
■Product Contents Check..........................4
■Proper Care of the BHT...........................6
■Components and Functions.....................7
■Input Method..........................................15
■Preparation ............................................16
■Step 1 Charging.....................................16
■Step 2 Attaching the Stylus ....................21
■Step 3 Turning ON the Power................22
■Scanning Barcodes ...............................25
■Turning ON/OFF the Backlight ..............27
■Changing the Default Settings ...............29
■Transmitting Data ..................................35
■Battery Power Level Indicator................41
■Replacing the Battery Cartridge.............42
■Using the BHT after Long Periods .........45
■Resetting and Full Resetting..................46
■Troubleshooting Guide...........................48
Operator’s Guide

Thank you for using the BHT-700BB-CE/BHT-700BWB-CE/BHT-700BWBG-CE
DENSO WAVE Barcode Handy Terminal. (BHT-700BB-CE and BHT700BWBG-CE
can't be used in North America)
Please read this manual thoroughly prior to operation to ensure full use of the
product’s functionality, and store safely in a convenient location for quick reference
even after reading.
This manual contains only the basic details required for operation.
Please refer to the User’s Manual for further details on general operation.
The User’s Manual can be downloaded free of charge from the DENSO WAVE Web
site (QBnet).
Microsoft, ActiveSync, Windows and the Windows logo are trademarks or registered
trademarks of Microsoft Corporation of the US or other countries.
Bluetooth®is a trademark owned by its proprietor. DENSO WAVE uses Bluetooth®
wireless technology under license.
Other company names or product names contained in this manual are trademarks or
registered trademarks of their respective holders.
The latest precision manufacturing technology yields LCD panels with an effective
resolution of 99.99% or higher. The downside, however, is that up to 0.01% of the
pixels can remain permanently dark or lit on today's state-of-the-art panels.
A thin Newton's ring (rainbow-like patterns) may appear on the touch panel.
This does not necessarily indicate a problem with the touch panel.

About this Manual
●Due to improvements and so on, the content of this manual may be subject to
change without prior notice.
●The reproduction or duplication of the whole or part of this manual is strictly
prohibited without prior consent.
●Please contact DENSO WAVE if this manual is lost.
●Every attempt has been made to ensure that the content of this manual is
thorough and up to date, however, we kindly ask that any questionable content,
mistakes, or omissions be reported to DENSO WAVE.
Related Manuals
The following manuals can all be downloaded free of charge from the DENSO WAVE
Web site (QBnet).
•BHT-710BB-CE/710BWB-CE/BHT-710BWB-CE User’s Manual
This manual contains detailed instructions for use of the
BHT-710BB-CE/710BWB-CE handy terminals and communication unit (CU-700).
•BHT-710-CE API Reference Manual
This manual contains instructions for developing application programs for the
handy terminal in Microsoft eMbedded Visual C++ 4.0.
•BHT-710-CE Class Library Reference Manual
This manual contains instructions for developing application programs for the
handy terminal in Microsoft Visual BASIC and Microsoft Visual C#.

Liability Limitations
•DENSO WAVE INCORPORATED does not assume any product liability (including
damages for lost profits, interruption of operations, or the loss of business-related
information) arising out of, or in connection with, the use of, or inability to use the
BHT system software or related manuals.
•DENSO WAVE INCORPORATED ("DENSO WAVE") takes reasonable precautions
to ensure its products do not infringe upon any patents or other intellectual property
rights of other(s), however, DENSO WAVE cannot be responsible for any patent or
other intellectual property right infringement(s) or violation(s) arising from any of
the following.
(1) The use of DENSO WAVE's products in connection or in combination with
other components, products, devices, data processing systems or software
not supplied by DENSO WAVE.
(2) The use of DENSO WAVE's products in a manner for which they were not
intended nor designed.
(3) The modification of DENSO WAVE's products by parties other than DENSO
WAVE.
•If it is judged by DENSO WAVE INCORPORATED that malfunction of the product
is due to the product having been dropped or subjected to impact, repairs will be
made at a reasonable charge even within the warranty period.

Customer Registration
To allow us to provide our customers with comprehensive service and support, we
request that all customers complete a Member Registration Form. Registered
members will be offered the following privileges.
•The latest upgrade information
•Free exhibition and event information for new products
•Free Web-information service "QBnet."
QBnet Service Contents
Information searching
service (FAQ) Offers detailed information on each product.
Download service Offers downloads of repair modules for the latest BHT
Series systems or software, and sample programs.
E-mail inquiries Product related queries can be sent in by e-mail.
* Please note that these privileges may be subject to change without prior notice.
How to Register
Access the URL below and follow the instructions provided.
http://www.denso-wave.com/en/adcd/support/

SAFETY PRECAUTIONS
Be sure to observe all these safety precautions.
Strict observance of these warning and caution indications are a MUST for preventing
accidents which could result in bodily injury and substantial property damage. Make
sure you fully understand all definitions of these terms and related symbols given
below, before you proceed on to the text itself.
Alerts you to those conditions which could cause
serious bodily injury or death if the instructions are not
followed correctly.
Alerts you to those conditions which could cause
minor bodily injury or substantial property damage if
the instructions are not followed correctly.
Meaning of Symbols
A triangle ( ) with a picture inside alerts you to a warning of danger.
Here you see the warning for electrical shock.
A diagonal line through a circle ( ) alerts you to something you should
not do; it may or may not have a picture inside. Here you see a
screwdriver inside the circle, meaning that you should not disassemble.
A black circle ( ) with a picture inside alerts you to something you MUST
do. This example shows that you MUST unplug the power cord.

Handling the battery cartridge
•Never disassemble or heat the rechargeable battery cartridge, nor
put it into fire or water; doing so could cause battery-rupture or
leakage of battery fluid, resulting in a fire or bodily injury.
•Do not carry or store the battery cartridge together with metallic
ballpoint pens, necklaces, coins, hairpins, etc.
Doing so could short-circuit the terminal pins, causing the batteries to
rupture or the battery fluid to leak, resulting in a fire or bodily injury.
•Avoid dropping the battery cartridge or letting it undergo any shock or
impact.
Doing so could cause the batteries to break, generate heat, rupture
or burn.
•Never charge the rechargeable battery cartridge where any
inflammable gases may be emitted; doing so could cause fire.
•Only use the dedicated charger for charging the rechargeable battery
cartridge.
Using a different type of charger could cause battery-rupture or
leakage of battery fluid and result in a fire, bodily injury, or serious
damage to property.
Handling the BHT
• Do not poke at the eyes with the stylus that comes with the BHT.

Handling the rechargeable cartridge
•Never charge a wet or damp rechargeable battery cartridge.
Doing so could cause the batteries to break, generate heat, rupture
or burn.
Handling the BHT
•If smoke, abnormal odors or noises come from the BHT, immediately
turn off the power, pull out the battery cartridge, and contact your
nearest dealer.
Failure to do so could cause smoke or fire.
•If foreign material or water gets into the BHT, immediately turn off the
power, pull out the battery cartridge, and contact your nearest dealer.
Failure to do so could cause smoke or fire.
•If you drop the BHT so as to damage its housing, immediately turn off
the power, pull out the battery cartridge, and contact your nearest
dealer.
Failure to do so could cause smoke or fire.
•Do not use batteries or power sources other than the specified ones;
doing so could generate heat or cause malfunction.
Never
disas-
sembly
• Never disassemble or modify the BHT; doing so could result in an
accident such as break or fire.
• Never put the BHT in places where there are excessively high
temperatures, such as inside closed-up automobiles, or in places
exposed to direct sunlight.
Doing so could affect the housing or parts, resulting in a fire.
• Avoid using the BHT in extremely humid or dusty areas, or where
there are drastic temperature changes.
Moisture or dust will get into the BHT, resulting in malfunction, fire or
electrical shock.

• In environments where static electricity can build into significant
charges (e.g., if you wipe off the plastic plate with a dry cloth), do not
operate the BHT. Doing so will result in malfunction or machine
failure.
• Touch (tap) the LCD only with the stylus that comes with the BHT.
Using the tip of a pen or any pointed object will result in a damaged
or broken LCD.
电子信息产品中有毒有害物质或元素的名称及含量
有毒有害物质或元素
部件名称 铅
(Pb)
汞
(Hg)
镉
(Cd)
六价铬
(Cr(VI))
多溴
联苯
(PBB)
多溴二
苯醚
(PBDE)
实装电路板 × ○ ○ ○ ○ ○
镜头 × ○ ○ ○ ○ ○
LCD面板 × ○ ○ ○ ○ ○
内部线路 × ○ ○ ○ ○ ○
○：表示该有毒有害物质在该部件所有均质材料中的含量均在SJ/T 11363-2006 标准
规定的限量要求以下。
×：表示该有毒有害物质至少在该部件的某一均质材料中的含量超出SJ/T 11363-2006
标准规定的限量要求。
使用欧盟RoHS指令的免除条款中指定的有毒有害物质。
该标志适用于在中华人民共和国境内销售的电子信息产品，标志中央的数字表示
环保使用期限的年数。

Declaration of Conformity (For European Union)
Hereby, DENSO WAVE INCORPORATED, declares that this BHT-700BB-CE ，
BHT-700BWB-CE ，BHT-700BWBG-CE is in compliance with the essential
requirements and other relevant provisions of Directive 1999/5/EC. (BHT700BB-CE
and BHT700BWBG-CE can't be used in North America)
CE marking:
LABELING:
For European Union

This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to
correct the interference by one of the following measures:
＊Reorient or relocate the receiving antenna.
＊Increase the separation between the equipment and receiver.
＊Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
＊Consult the dealer or an experienced radio/TV technician for help.
FCC Caution:
Any changes or modifications not expressly approved by the party responsible
for compliance could void the user's authority to operate this equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may
cause undesired operation.
This device and its antenna(s) must not be co-located or operating in
conjunction with any other antenna or transmitter.
This device is going to be operated in 5.15 ~ 5.25GHz frequency range and it
is restricted in indoor environment only.
RF Exposure Information (SAR)
This model device meets the government’s requirements for exposure to radio
Federal Communication Commission Interference

waves.
This device is designed and manufactured not to exceed the emission limits for
exposure to radio frequency (RF) energy set by the Federal Communications
Commission of the U.S. Government.
The exposure standard for wireless mobile devices employs a unit of
measurement known as the Specific Absorption Rate, or SAR. The SAR limit set by
the FCC is 1.6W/kg. *Tests for SAR are conducted using standard operating
positions accepted by the FCC with the device transmitting at its highest certified
power level in all tested frequency bands. Although the SAR is determined at the
highest certified power level, the actual SAR level of the device while operating can
be well below the maximum value. This is because the device is designed to
operate at multiple power levels so as to use only the poser required to reach the
network. In general, the closer you are to a wireless base station antenna, the lower
the power output.
The highest SAR value for the model device as reported to the FCC when
tested for use when worn on the body, as described in this user guide, is 0.232 W/kg
(Body-worn measurements differ among device models, depending upon available
enhancements and FCC requirements.)
While there may be differences between the SAR levels of various devices
and at various positions, they all meet the government requirement.
The FCC has granted an Equipment Authorization for this model device with
all reported SAR levels evaluated as in compliance with the FCC RF exposure
guidelines. SAR information on this model device is on file with the FCC and can be
found under the Display Grant section of http://www.fcc.gov/oet/fccid after searching
on FCC ID: PZWBHT710BWB.
For body worn operation, this device has been tested and meets the FCC RF
exposure guidelines for use with an accessory that contains no metal and the
positions the handset a minimum of 1.5 cm from the body. Use of other

enhancements may not ensure compliance with FCC RF exposure guidelines. If
you do no t use a body-worn accessory and are not holding the device at the ear,
position the handset a minimum of 1.5 cm from your body when the device is
switched on.
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe B conforme á la norme NMB-003 du Canada.
Operation is subject to the following two conditions: (1) this device may not cause
interference, and (2)this device must accept any interference, including interference
that may cause undesired operation of the device.
For WLAN 2.4G device available in the USA/Canada market, only channel 1~11 can
be operated. Selection of other channels is not possible.
This device and its antenna(s) must not be co-located or operation in conjunction
with any other antenna or transmitter which is not certified together with this device.
To reduce potential radio interference to other users, the antenna type and its gain
should be so chosen that the equivalent isotropic radiated power (e.i.r.p) is not more
than that permitted for successful communication.
The device for the band 5150-5250 MHz is only for indoor usage to reduce potential
for harmful interference to co-channel mobile satellite systems.
IMPORTANT NOTE:
IC Radiation Exposure Statement
This EUT is compliance with SAR for general population/uncontrolled exposure limits
Industry Canada Interference Stent

in IC RSS-102 and had been tested in accordance with the measurement methods
and procedures specified in IEEE 1528. This equipment should be installed and
operated with minimum distance 1.5cm between the radiator and your body.
MEMO

1
Introduction
Usage Precautions
If the BHT is left with the battery cartridge discharged or with no battery cartridge
loaded, or if the battery cartridge is replaced incorrectly, data stored in the BHT may
be lost.
By performing a full reset (refer to “Resetting and Full Resetting”), all data stored in
the RAM will be lost. It is therefore recommended that important data be either saved
to the “FLASH” folder or backed up at the computer.

2
Introduction
Usage environment restrictions
●Do not use the BHT where it may be exposed to fire, high temperatures, or
direct sunlight.
(Failure to observe this may result in damage, overheating, explosion, or fire.)
* When the BHT is stored in a high-temperature, high-humidity environment of 50 to 60°C,
leave to sit in a location at room temperature and normal humidity for at least 1 day prior to
use. Failure to observe this may cause a scanning failure or damage the BHT.
●Do not use the BHT in places with extreme temperature variations.
(Failure to observe this may lead to BHT malfunction due to condensation.)
* Leave the BHT for a short while prior to use when moved from a cold to a warm
environment.
●Do not use the BHT in places where it may be exposed to strong impact or
significant static electricity.
Keep the BHT away from electromagnetic waves and
metallic objects.
Wireless communication may not be possible in the following locations.
●In the vicinity of the following devices operating on a 2.4/5.0GHz waveband
(Communication may not be possible due to electromagnetic interference.)
•Industrial, scientific, or medical equipment such as microwave ovens
•Wireless LAN devices
•Logistics systems in places such as plants or warehouses
•Wireless devices such as personal or amateur radio stations
●In the vicinity of household appliances emitting electromagnetic waves such
as computers or televisions
(Communication may not be possible due to electromagnetic noise.)
●In the vicinity of metallic objects, in places with high levels of metallic dust,
or in places surrounded my metal walls
(Communication may not be possible due to the presence of metallic objects.)
Avoid light interference.
Infra-red communication may not be possible due to light interference.
Ensure to observe the following when performing infra-red communication.
●Do not operate remote control units for televisions and so on nearby.
●The BHT should not be exposed to light interference such as strong
illumination (especially the inverter fluorescent lamp) or sunlight.
Usage Precautions

3
Introduction
Wireless Equipment
●Precautions relating to the frequency used by this device
In addition to industrial, scientific, and medical equipment such as microwave ovens,
static wireless stations (permit required) used for mobile identification in places
such as plant manufacturing lines and specified low-power wireless stations (no
permit required) operate on the same frequency band as this device.
1.Before using this device, ensure that no static wireless stations or specified
low-power wireless stations for mobile identification are being used in the vicinity.
2.In the event of instances of electromagnetic interference from this device to a
static wireless station being used for mobile identification, either promptly alter the
usage frequency, or halt the electromagnetic discharge
3. If other problems arise due to reasons such as electromagnetic interference from
this device to a specified low-power wireless station being used for mobile
identification, please contact DENSO WAVE through QBnet (see page iv).
4. This device is equipped with an international roaming function (IEEE802.11a/b/g)
that allows suitable channels to be selected within specific countries (excludes
the BHT-710BB-CE).
5. Set the country using the access point prior to use. Setting to a country other
than that in which the device is used may be considered a violation of the law
(excludes the BHT-710BB-CE).
●Requests to system designers
•Communication may not be possible depending on the environment in which the
device is being used. Ensure that problem-free communication is possible prior to
use.
•Use a program capable of retransmitting data if communication fails.
•If the BHT is introduced into an environment in which a device using 2.4/5.0GHz
waveband electromagnetic waves is operating, or if a another device using
2.4/5.0GHz waveband electromagnetic waves is introduced following introduction
of the system, run all devices and ensure that communication with the BHT is
possible prior to use.
•Check communication once again prior to use if any changes are made to the
usage environment (addition of household appliances, movement or addition of
shelves, equipment and so on) following introduction of the system.

4
Introduction
Product Contents Check
Ensure you have all of the following items prior to use. Contact your dealer in the
event that any items are missing or damaged.
(BB and BWBG can’t be used
In North America)
Refer to page ii for details of related manuals such as the User’s Manual.
Operator’s Guide
(this manual)
Handy terminal
(BHT-700BB-CE)
(BHT-700BWB-CE)
(BHT-700BWBG-CE)
User’s Manual
(for BT-700L/700LL)
Soft case for charger
Stylus Adapter cable Cable holder Screw
For BHT-700BWBG-CE
BT-700LLBT-700L
Charger (lithium-ion battery): Option
or

5
Introduction
●Handling the headset jack (option) (BHT-700BWBG-CE only)
(BWBG can’t be used In North America)
When using the optional headset jack, connect the adapter cable provided using the
cable holder and screw as shown below.
Request
Avoid inserting the connector at an angle or pulling the adapter cable strongly.
Product Contents Check

6
Introduction
Proper Care of the BHT
Ensure to turn OFF the BHT before cleaning.
●BHT terminal, charger terminal dirt
Periodically wipe any dirt from the BHT or battery terminals with a cotton swab and
so on.
●Housing dirt
Wipe any dirt from the housing with a dry, soft
cloth.
If excessively dirty, wipe with a soft cloth that
has been soaked in soapy water (always use
neutral detergent) and wrung out thoroughly.
Never use substances such as benzene or
alcohol, as this may cause the housing to be
marred or paint to peel off.
●LCD screen dirt
Never rub or strike the LCD screen with anything hard, as this may result in
scratches on the screen or breakage.
●Keypad dirt
When cleaning the keypad, do not scrub the surface too hard or pull on the keys, as
this may break the keys.
●Barcode reading window dirt
Any dirt or dust adhering to the clear plate of the barcode reading window will
adversely affect reading performance.
When using in dusty areas, perform periodic inspections to check whether any dust
has accumulated on the clear plate of the barcode reading window, and if so, first
blow the dust away with an airbrush, and then gently wipe the plate with a cotton
swab or similar soft object.
If sand or hard particles have accumulated, rubbing the plate will result in scratches.
Blow the particles away with an airbrush or wipe with a soft brush.