Denso BHT-1600 User manual

Barcode/2D code Barcode/2D code
Handy Terminal Handy Terminal
Barcode/2D code
Handy Terminal
BHT-1600BHT-1600BHT-1600
Userʼs ManualUserʼs Manual

i
BHT-1600 Handy Terminal User Manual
Copyright 2017 Supplier of DENSO WAVE INCORPORATED
All rights reserved
The software contains proprietary information of its owner; it is provided under a license
agreement containing restrictions on use and disclosure and is also protected by copyright
law. Reverse engineering of the software is prohibited.
Due to continued product development, this information may change without notice. The
information and intellectual property contained herein is confidential between the owner
and the client and remains the exclusive property of the owner. If having any problems in
the documentation, please report them to us in writing. The owner does not warrant that
this document is error-free.
No part of this publication may be reproduced, stored in a retrieval system, or transmitted
in any form or by any means, electronic, mechanical, photocopying, recording or otherwise
without the prior written permission of the owner.
For product consultancy and technical support, please contact the local sales representative.
Also, visit our website for more information.
All brand, logo, product and service, and trademark names are the property of their
registered owners.
The editorial use of these names is for identification as well as to the benefit of the owners,
with no intention of infringement.
DENSO WAVE logo is a registered trademark of DENSO WAVE INCORPORATED. All other
brands, products and services, and trademark names are the property of their registered
owners. The editorial use of these names is for identification as well as to the benefit of the
owners, with no intention of infringement.
DENSO WAVE INCORPORATED
Website: http://www.denso-wave.com

ii
BHT-1600 Handy Terminal User Manual
PREFACE
Thank you for using the DENSO WAVE 2D Code Handy Terminals.
Please read this manual thoroughly prior to the operation to ensure full use of the product’s functionality,
and store safely in a convenient location for quick reference even after reading.
The BHT-1600 are developed as wireless stations for the low power data communication system and
have been given a certificate of technological conformance defined by the applicable radio law,
allowing users not to apply for or obtain a license to use a wireless station. Any modification or
reconstruction of the radio station is strictly banned by the radio law and anyone who has violated this
regulation is subject to penalties.
BHT, QR Code, and QBdirect are trademarks of DENSO WAVE INCORPORATED.
The Bluetooth®word mark is a registered trademark of Bluetooth SIG, Inc.

iii
BHT-1600 Handy Terminal User Manual
LIABILITY LIMITATIONS
•DENSO WAVE INCORPORATED does not assume any product liability (including damages for lost
profits, interruption of operations, or the loss of business-related information) arising out of, or in
connection with, the use of, or inability to use the BHT system software or related manuals.
•DENSO WAVE INCORPORATED (“DENSO WAVE”) takes reasonable precautions to ensure its
products do not infringe upon any patents or other intellectual property rights of other(s), however,
DENSO WAVE cannot be responsible for any patent or other intellectual property right infringement(s)
or violation(s) arising from any of the following.
1) The use of DENSO WAVE’s products in connection or in combination with other components,
products, devices, data processing systems or software not supplied by DENSO WAVE.
2) The use of DENSO WAVE’s products in a manner for which they were not intended nor
designed.
3) The modification of DENSO WAVE’s products by parties other than DENSO WAVE.
•If it is judged by DENSO WAVE INCORPORATED that malfunction of the product is due to the product
having been dropped or subjected to impact, repairs will be made at a reasonable charge even within
the warranty period.

iv
BHT-1600 Handy Terminal User Manual
CUSTOMER REGISTRATION
To allow us to provide our customers with comprehensive service and support, we request that all
customers complete a Member Registration Form. Registered members will be offered the following
privileges.
•The latest upgrade information
•Free exhibition and event information for new products
•Free Web-information service “QBdirect”.
QBdirect Service Contents
Information search
service (FAQ)
Offers detailed information on each product.
Download service
Offers downloads of repair modules for the latest BHT Series
systems or software, and sample programs.
E-mail inquiries
Product related queries can be sent in by e-mail.
* Please note that these privileges may be subject to change without prior notice.
−How to Register
Access the URL below and follow the instructions provided.
0Hhttp://www.qbdirect.net/
INQUIRIES
−Technical Inquiries (QBdirect)
•BHT product programming method
•Product setup method, usage
•Other technical questions
Inquires relating to the above can be made at our exclusive Web site for registered users
(QBdirect).
Access the link below to log on or register.
1Hhttp://www.qbdirect.net/
CUSTOMER REGISTRATION AND INQUIRIES

v
BHT-1600 Handy Terminal User Manual
SAFETY PRECAUTIONS
Be sure to observe all these safety precautions.
Please READ through this manual carefully. It will enable you to use the BHT and CU correctly.
Always keep this manual nearby for speedy reference.
Strict observance of these warnings and cautions is a MUST for preventing accidents that could result in
bodily injury and substantial property damage. Make sure you fully understand all definitions of these terms
and symbols given below before you proceed to the text itself.
WARNING
Alerts you to those conditions that could cause serious bodily injury or death if the
instructions are not followed correctly.
CAUTION
Alerts you to those conditions that could cause minor bodily injury or substantial
property damage if the
instructions are not followed correctly.
Meaning of Symbols
A triangle (
) with a picture inside alerts you to a warning of danger. Here you see the warning for
electrical shock.
A diagonal line through a circle (
) warns you of something you should
not do; it may or may not have a
picture inside. Here you see a screwdriver inside the circle, meaning that you should not disassemble.
A bl
ue circle ( ) with a picture inside alerts you to something you MUST do. This example shows that
you MUST unplug
the power cord.

vi
BHT-1600 Handy Terminal User Manual
WARNING
To system designers:
When introducing BHTs in those systems that could affect human lives, develop applications
carefully through redundancy and safety design which avoids the feasibility of affecting human
lives even if a data error occurs.
Handling the battery cartridge
Wrong handling of the battery cartridge may affect normal operation or result in a heat, smoke, or
scanner failure.
Be sure to observe the following.
Never put the battery cartridge in a microwave oven or high-pressure container.
Stop charging if the charging is not completed within the specified period of time.
Do not use different types of batteries nor mix new (unused) and old (used) batteries.
Handling the BHT
Wrong handling of the BHT may affect normal operation or result in vision disturbance. Be sure to
observe the following.
Never stare into the laser light.
Never point the code reading window at someone’s eyes.
Never disassemble or modify the BHT.
Do not insert any foreign materials into the battery cartridge.
Do not get the BHT wet or put it in water.
Never put the BHT in a microwave oven or high-pressure container.
Never put the BHT in places where there are excessively high temperatures, such as inside
closed-up automobiles, or in places exposed to direct sunlight.
Avoid using the BHT in extremely humid or dusty areas, or where there are drastic
temperature changes.
Stop using the BHT if its case is broken.
Do not use a battery cartridge or power source other than the specified one.
If the LCD screen is broken by mistake, care must be taken not to get the liquid crystal into
your eyes or mouth or drop it on your skin.
Reading window
(Laser light emission window)

vii
BHT-1600 Handy Terminal User Manual
If smoke, abnormal odor or noise comes from the BHT, immediately turn off the power and
remove the battery cartridge from the scanner case.
If the LCD screen is accidentally broken and liquid crystal gets into your eyes or mouth, wash it
off immediately with clean water and then seek medical care.
Or, if is attached to your skin or cloths, wipe it off immediately and then wash it using soap and
water. Failure to do so may lead to vision loss or cause trouble in the skin.
Be careful of broken glass if the LCD screen is accidentally cracked or broken. It may cause
bodily injury.
CAUTION
Handling the battery cartridge
Wrong handling of the battery cartridge may affect normal operation or result in a heat, smoke, or
scanner failure. Be sure to observe the following.
Never disassemble or modify the battery cartridge.
Do not connect the battery cartridge’s positive (+) and negative (-) terminals with metals such
as wires.
Do not carry or store the battery cartridge together with metallic ball-point pens, necklaces,
coins, hairpins, etc.
Do not get the battery cartridge wet or put it in water.
Do not heat up the battery cartridge or put it into fire.
Never charge or leave the battery cartridge near a fire or an electric heater (high temperature
places of more than 50°C) or under the scorching sun.
Never charge the battery cartridge in places where any inflammable gases may be emitted.
Do not drive a nail into the battery cartridge nor hit it with a hammer or otherwise stomp on it.
Do not let the battery cartridge undergo any strong shock or impact.
Do not use the battery cartridge that is damaged on the surface or in unstable conditions.
Do not solder the battery cartridge.
Do not use the battery cartridge for other purposes than the BHT.
If abnormal odor, heat, discoloration, deformation or any other abnormal conditions are
observed, immediately stop using the battery cartridge.
Do not use other than the dedicated charger when charging the battery cartridge.
If liquid leakage of the battery cartridge gets into your eyes, wash it off immediately with clean
water and then seek medical care. Be careful not rub your eyes at this time.
Failure to do so may cause damage to your eyesight.

viii
BHT-1600 Handy Terminal User Manual
Handling the BHT
Wrong handling of the BHT may affect normal operation or result in vision disturbance. Be sure to
observe the following.
When using the hand strap or neck strap, exercise due care to avoid getting them caught in
other objects or entangled in rotating machinery.
Failure to do so could result in accident or injury.
The battery cartridge may be warmed up after it is charged or immediately after it is used.
Do not use the BHT near a wireless transmitter such as a personal radio or ham radio. Doing
so could result in malfunction or mechanical failure.
Keep magnetic cards such as a cash card or a credit card away from the BHT. Failure to do so
could cause loss of magnetic data.
Do not move your ear close to the speaker while the Buzzer is beeping. Doing so could lead to
hearing difficulty.
Do not use excessive force when inserting or removing the battery cartridge. Doing so could
result in malfunction or mechanical failure.
Do not operate the BHT in environments where static electricity can build into significant
charges. Doing so could result in malfunction or mechanical failure.
Avoid dropping the battery cartridge or letting it undergo any strong shock or impact. Doing so
could result in malfunction or mechanical failure.
When condensation forms on the external surfaces of the BHT, make sure that the BHT is left
unwiped and unused until external condensation dries out naturally. Condensation on external
surfaces indicates existence of internal condensation which may cause problems for electronic
components.
Do not listen at high volume levels for long periods to prevent possible hearing damage.
Do not operate this device while walking, cycling or car driving.
Do not insert the handy terminal to a charging cradle if water or drippings are staying on the
device.
Not Charging could be the result of battery damage, battery’s failure to touch the connector or
AC plug coming off.
If you want to put away the handy terminal for a period of time, download the collected data to
a host computer, and then remove the battery pack from the handy terminal’s battery
compartment. Store the handy terminal and battery pack separately.

ix
BHT-1600 Handy Terminal User Manual
PREFACE .................................................................................................. II
Liability Limitations................................................................................iii
CUSTOMER REGISTRATION AND INQUIRIES ...................................................IV
Customer Registration............................................................................iv
Inquiries ............................................................................................iv
Safety Precautions.....................................................................................v
CONTENTS ................................................................................................IX
INTRODUCTION........................................................................................... 1
Features.................................................................................................2
Inside the Package ....................................................................................2
Accessories .............................................................................................2
QUICK START............................................................................................. 3
1.1. Overview ..............................................................................4
1.1.1. Installing Battery.....................................................................6
1.1.2. Installing SIM Card, SAM Card and Memory Card................................8
1.1.3. Power On/Off Handy Terminal .................................................. 10
1.1.4. Homescreen Selection............................................................. 11
1.1.5. Using Hardware Buttons .......................................................... 12
1.1.6. Connecting Headset ............................................................... 12
1.2. Charging & Communication ...................................................... 13
1.2.1. Charge Handy Terminal........................................................... 13
1.2.2. Wired Data Transmission.......................................................... 17
1.2.3. Using Wireless Networks.......................................................... 17
USING THE BHT-1600 HANDY TERMINAL...........................................................18
2.1. Battery............................................................................... 19
2.1.1. Battery Status Indicators ......................................................... 20
2.1.2. Monitor Battery Level ............................................................. 22
2.1.3. Replace Main Battery.............................................................. 26
2.1.4. Power Management................................................................ 28
2.2. Memory .............................................................................. 29
2.2.1. Check Memory Usage.............................................................. 30
2.2.2. Manage Storage Space............................................................. 31
2.3. Touch Screen ....................................................................... 39
2.3.1. Screen Brightness .................................................................. 39
2.3.2. Screen rotation..................................................................... 40
2.3.3. Screen Timeout Settings.......................................................... 42
2.3.4. Text Size ............................................................................ 43
2.4. Notifications ........................................................................ 44
2.4.1. Status LED........................................................................... 44
2.4.2. Audio................................................................................. 44
C
ONTENTS