Denver DVD-438 User manual

mp3
DVD / MPEG4 / MP3 / CD PLAYER
DVD-438
OPERATION MANUAL

2
The lightning flash with arrow-
head symbol, within an equilat-
eral triangle, is intended to alert
the user to the presence of
uninsulated "dangerous voltage"
within the product's enclosure
that may be of sufficient magni-
tude to constitute a risk of elec-
tric shock to persons.
The exclamation point within an
equilateral triangle is intended to
alert the user to presence of im-
portant operating and mainte-
nance (servicing) instructions in
the literature accompanying the
appliance.
RISK OF ELECTRIC SHOCK
DO NOT OPEN
WARNING: TO REDUCE THE
RISK OF ELECTRIC SHOCK,
DO NOT REMOVE COVER (OR
BACK). NO USER-SERVICE-
ABLE PARTS INSIDE, REFER
SERVICING TO QUALIFIED
SERVICE PERSONNEL.
PLEASE READ THE INSTRUCTION CAREFULLY BEFORE OPERATING THIS UNIT.
WARNING
To prevent fire or shock hazard, do not expose this appliance to rain or moisture.
IMPORTANT
Since the CD circuitry may cause interference to other radio tuners nearby, switch this unit off
when not in use or move it away from the affected radio tuner.
DANGER
LASER SAFETY
This unit employs an optical laser beam system in the CD mechanism,
designed with built -in safeguards. Do not attempt to disassemble,
refer to qualified service personnel. Exposure to this invisible laser
light beam may be harmful to the human eye.
THIS IS A CLASS-1 LASER PRODUCT. USE OF CONTROLS, OR
ADJUSTMENTS OR PROCEDURES OTHER THAN THOSE SPECI-
FIED HEREIN, MAY RESULT IN HAZARDOUS LASER LIGHT BEAM
EXPOSURE.
INVISIBLE LASER
RADIATION WHEN
OPEN AND INTER-
LOCK FAILED OR DE-
FEATED. AVOID DI-
RECTEXPOSURETO
LASER BEAM.

3
Getting Started
Before attempting to connect, operate or adjust this product, please read these instruction
completely and keep this manual for future reference.
Dear customers :
May we take this opportunity to thank you for purchasing this DVD Player.
We strongly recommend that you carefully study the operating instructions before operating
the unit.
Main Features
•Front loading DVD / MPEG 4 / MP3 / CD player.
•Built-in Dolby Digital.
Standards
Video : NTSC or PAL
Audio : PCM (48 or 96 kHz), 5.1 Channel MPEG layer 2, Dolby AC-3 & dts line out
Features of audio specifications
–DOLBY Digital 5.1 ch decoding output
–DTS for Digital (Coaxial & Optical) output
–Linear PCM output

4
* Player is CD-R, CD-RW, DVD±R, DVD±RW compatible.
Note: CD-R, CD-RW Discs recorded with writing device can only be used when they are
correctly treated.
Region Management Information
This DVD Player is disigned and manufactured to respond to the Region Management Infor-
mation that is recorded on a DVD disc. If the Region number described on the DVD disc does
not correspond to the Region number of this DVD Player, this DVD player cannot play that
disc.
This Region number of this DVD player is .
Disc manintenace
–Before playback, wipe the disc from the center hole toward the outer edge with a clean
cloth.
–Never use bezine, thinner, cleaning fluid, static electricity prevention liquids or any other
solvent.
Note : Dirty disc may cause bad picture.
Audio & Video
Audio
Audio
Disc size 12cm
single side, single layer / single side, double layer
PAL and NTSC DVD disc
Playback time 135min / 240min max.
Disc size 12cm / 8cm
CD disc
Playback time 74min/20min max.
MP3 format disc
Getting Started
Disc types
MP3
Correct
From the center to the edge
Incorrect

5
Safety precautions
Warning
To avoid electrical shock, do not open the
cabinet, refer servicing to qualified person-
nel only.
Warning
Keep the unit away from flower vases, tubs,
sinks, etc. If liquids are spilt into the unit,
serious damage could occur.
Warning
Do not expose this equipment to rain or
moisture.
Warning
Do not block ventilation holes of the unit so
that air can circulate freely.
Attention
If smoke, malodor or unrelated noise are
emitted from the unit, turn off the power and
disconnect the AC power cord.
Attention
Touching the unit is dangerous especially if
during thunder.
Attention
When left unused for a long period of time,
the unit should be unplugged from the house-
hold AC outlet.
Attention
Be sure to turn the unit off and disconnect the AC
power cord before cleaning the unit surface. If the
surface is dirty, wipe clean with a cloth which has
been dipped in a weak soap and water solution and
wrung out thoroughly, and then wipe again with a
dry cloth.
Note: This unit is a class 1 laser product and uses a visible laser beam which could
cause hazardous radiation exposure if directed. Be sure to operate it correctly as
instructed.

6
Front Panel Control
1. Power On/Off
2. Display
3. Remote Sensor
4. Disc Tray
5. Standby Indicator
6. Open/Close Button
7. Skip Backward Button
8. Play/Enter Button
9. Skip Forward Button
10. Stop Button
Rear Panel Control
1. Digital Audio Output (Coaxial)
2. Digital Audio Output (Optical)
3. Analog Audio Output
4. Video Output (Composite)
5. S-Video Output
6Component Video Output (Scart)
7. AC Power Cord
Display
1. DVD Indicator
2. Dts Indicator
3. Dolby Digital Indicator
4. Multi-angle view Indicator
5. MP3 Indicator
6. Disc loading Indicator
7. PLAY Indicator
8. REPEAT Indicator
9. PAUSE Indicator
10. Track (CD) / Chapter (DVD) number
11. Play Time Display
1
25 7
34 6
1
67 8 9 1110
2 3 4 5
12345 678910

7
Getting Started
Battery installation (remote control unit)
1. Remove the battery cover.
2. Insert two batteries (AAA) making sure the polarity (+/-) matches the marks inside the unit.
3. Replace the cover.
–Do not attempt to recharge, short-circuit, disassemble,
heat or throw the batteries into the fire.
–Do not mix old and new batteries
Note : Weak batteries can leak and severely damage the re-
mote control unit.
Remote Control Unit
1. Power on/off
2. Numeric Buttons
3. PAL/MULTI/NTSC Button
4. Audio Button
5. Angle Button
6. DVD Menu Button
7. Subtitle Button
8. Direction Buttons
( Up / Down/ Left/ Right)
9. Previous Button
10. Step/Pause Button
11. Play Button
12. Stop Button
13. Search Button
14. Slow Button
15. Mute Button
16. Eject Button
17. Zoom Button
18. Set Up Button
19. Display Button
20. PBC Button
21. Volume + Button
22. Volume - Button
23. Enter Button
24. Next Button
25. Fast Backward Button
26. Fast Forward Button
27. Program Button
28. Repeat Button
29. Return Button
30. Cancel Button
31. Repeat A-B Button
+
—
+
—
MUTE
MUTE
3
2
14
6
58
7
0
9+10
+10
DISPLA
DISPLA
Y
PBC
PBC
AUDIO
UDIO
ANGLE
ANGLE
DVD MENU
VD MENU
VOL+
OL+
PREVIOUS
PREVIOUS
NEXT
NEXT
/STEP
/STEP
PLA
PLA
Y
REPEA
REPEA
T


RETURN
RETURN
A-B
A-B
SLO
SLO
W
SEARCH
SEARCH

ZOOM
ZOOM
SETUP
SETUP
PAL-MUL-NT
AL-MUL-NT
VOL-
OL-
SUBTITLE
SUBTITLE
PR
PR
OGRAM
OGRAM
CANCEL
CANCEL
1
2
3
4
5
6
7
8
9
10
11
12
13
14 31
30
29
28
27
26
25
24
23
22
21
20
19
18
17
16
15

8
Connect To TV
Caution : Turn off all the equipment before any installation.
This unit provides several types of video and audio signals output. They are :
•SCART Output
•RCA output
•S-Video Output
User can choose a suitable connection type to connect the player to TV.
1. SCART Version
2. Connection via Composite (RCA) Cable
In this type of connection, we have to connect the Left/RightAudio Cables (Red and White)
and a Video signal (Yellow).
Note : Go to part 4.
3. Connection via S-Video Cable
Video in
Audio in L
Audio in R
SCART (RGB)
S-Video in
Audio in L
Audio in R

9
4. Configure the TV System
The DVD Player supports PAL, NTSC and Multi-system TV type. In case there is no
picture output on the screen, please switch your player TV mode in the Setup menu for
proper TV System configuration.
1. Press SETUP on the remote control.
2. Choose SCREEN SETUP and press ENTER.
3. Choose TV SYSTEM.
4. Select the correct TV mode.
Connection to Amplifier
There are four different types of connection between the DVD player and an amplifier.
•Digital output via Optical Fiber (Connection 1).
•Digital output via Coaxial Cable (Connection 2).
•2Channels (Left/Right) Audio Output (Connection 3 - 4)
• 5.1 Channels Audio Output (Connection 3 - 8 )
NOTE: 1. The Digital/Optical output cut off, when Analog output was selected.
2. TheAnalog output cut off, when Digital/Optical output was selected.
12
34
56
78
3
4
7
8

10
Operation
TV Selection
Turn on the TV, the DVD player and the Audio Amplifier System (if any).
1. Press the “TV/VIDEO” button on the TV.
2. Select the Video Mode (TV).
Note: If there are more than 1 AV channel for the TV, select the channel you have con-
nected to the DVD player.
3. Select the CorrectAudio Input on the AV Amplifier (if any)
Setup Mode
•Setup Mode provides the menu for the configuration of LANGUAGE mode, SCREEN mode,
AUDIO mode .
•Item selection in the Setup Menu is done by using the Navigation Arrows and the ENTER
key.
•To exit the Setup Menu, choose the EXIT option in the Setup Menu and press ENTER.
OSD
There are 6OSD languages embedded in the DVD Player: English, Denish, German, Swed-
ish, French and Spanish.
•Press the SETUP button on the remote controller to enter the setup menu main page.
Play Discs
1. Press the OPEN/CLOSE button ( ) on the front panel and load the Disc on the tray. the
label side should be facing upwards. For a Double-sided DVD Disc, put the disc with label
A/1 up.
2. Press the OPEN/CLOSE button ( ) again to close the tray and the disc will be loaded.
3. The Disc will be loaded automatically.
•If it is a DVD disc, it will show the Menu / Title Page on the screen where you can access
to the Casting Information, Product History, Movie Introduction etc.
•Select the desired items from the Menu screen using the Navigation Arrows (  )
and pressing ENTER button on the remote control.
4. Press the STOP button ( ) if you want to stop the Disc playback. You can resume
playback by pressing the PLAY button and it will start at the location where you have
pressed stopped (Resume Play).
5. Press the STOP button twice to have the Disc really stopped.