
a. For first use, take the earbuds out of the packa e. Then press and hold the touch panel
of the left and ri ht earbuds simultaneously to power on the earbuds. The LEDs of the
earbuds li ht up, and the voice prompt of ‘Power on’ occurs from the earbuds.
If you remove the earbuds from the char in case after char in , the left and ri ht earbuds
turn on automatically.
b. The left and ri ht earbuds connect each other automatically. The voice prompt of ‘Left
channel’ and ‘Ri ht channel’ occurs from the left earbud and ri ht earbud respectively.
c. The LED of the left earbud flashes blue and red alternatively, indicatin that the earbuds
are ready to connect with smartphone.
d. Turn on Bluetooth on your smartphone to search for the earbuds named ‘TWE-60_L’.
e. Select ‘TWE-60_L’ to pair your smartphone with the earbuds. Enter ‘0000’ if prompted
for password. When successfully paired, the voice prompt of ‘connected’ occurs.
The earbuds re-connect with your smartphone automatically after pairin .
Notes:
- The left earbud is the main earbud, and the ri ht earbud is the slave earbud.
- When puttin the ri ht earbud back into the char in case, the ri ht earbud turns off
automatically, and the left earbud remains on and connected with your smartphone.
- When puttin the left earbud back into the char in case, the left earbud turns off
automatically, and the ri ht earbud is disconnected with your smartphone.
- When puttin the left and ri ht earbuds back into the char in case simultaneously, both
earbuds turn off automatically, and are disconnected with your smartphone.
- The left or ri ht earbud can be used alone to connect with your smartphone, and thus only
mono sound is available. Stereo sound is only available usin the left and ri ht earbuds in
pair.
Page 4
2. Charging earbuds
a. Put the earbuds into the char in case, and the earbuds are char ed automatically until fully
char ed.
b. Durin char in , press once the ON/OFF button on the char in case to display the battery
capacity level.
c. Durin char in , press twice the ON/OFF button on the char in case. The LED on the
char in case turns off and the earbuds char in stops.