Denver MET-100 User manual

DENVER MT-100
Quick Start Guide
1. TURN ON: Turn DISCRIMINATION knob until red LED lights shortly up and then set to
MIN
2. TUNE: Keep holding RED button do n and at the same time rotate TUNE knob until the
dial in the display is set at “0” (Yello part of display)
3. HOW TO USE: Move slo ly in side ays motions close over ground until display dial
sho s reading (either to left/red side or to right/green side)
4. READING TO LE T/RED COLOR SIDE O DISPLAY (AND NO SOUND) means smaller
iron article (ferrous) (for example iron nail).
5. READING TO RIGHT/GREEN COLOR SIDE O DISPLAY (AND SOUND) means other
metal (could be coin or gold ring) but can also be big iron article (ferrous). You need to dig
up to see hat it is.
6. IMPORTANT: You have to use RED color button to reset TUNE to “0” after each reading!
(keep the round disc close to ground and here there is no metal)
7. CAUTION: Before starting to use the metal detector please take most care not to use the
metal detector in any area hich might contain dangerous items such as explosives from
a ar or po er cables or gas lines or any other dangerous items.”

ALL RIGHTS RESERVED, COPYRIGHT DENVER ELECTRONICS A/S
Electric and electronic equipment contains materials, components and substances that can
be hazardous to your health and the environment, if the aste material (discarded electric
and electronic equipment) is not handled correctly.
Electric and electronic equipment is marked ith the crossed out trash can symbol, seen
belo . This symbol signifies that electric and electronic equipment should not be disposed of
ith other household aste, but should be disposed of separately.
All cities have established collection points, here electric and electronic equipment can
either be submitted free of charge at recycling stations and other collection sites, or be
collected from the households. Additional information is available at the technical department
of your city.
Imported by:
DENVER ELECTRONICS A/S
Stavneagervej 22
DK-8250 Egaa
Denmark
.facebook.com/denverelectronics