Denver WCL-8040MK2 User manual

WCL-8040MK2
denver.eu
June-2023

ENG 01

ENG 02

38pcs 940nm IR
30/24/20/16MP
2K/30fps(H.265),
1080P/ 720P/ VGA
Photo Transmission Yes
Video Transmission Yes
Date Time Imprint Yes
9-12V
Memory Micro SD Card up to 256GB
Accessories
MOV
ENG 03
2.31 inches
Antenna, Tweezers,
Belt, USB Type C Cable

LEDs
Photosensitive
LED
Indicator
Lens
Main
PIR
sensor
Side PIR sensor
Latch
ENG 04

Color Display Screen
Setup buttons 8*AA battery Depot
SIM
card slot
Micro SD card slot
USB
Type C Port
Mode
Switch
Stand knob Port
ENG 05

Open the battery cover insert 8*AA battery, following
to the positive and negative battery sign, then close
the battery cover to resist water and dust.
Or you can use an external power supply, a 9-
12V adapter.
ENG 06

2. Searching for TUYA Smart in App Store for
IOS and Google Play for Android
Open the APP and create an account by click on
“Sign Up”, enter to the registration screen and fill
out the requested information such as phone
number or email registered account. Completing
the registration and log in to the APP.
APP Download
1. Scan the QR code download the APP
Register and log in
ENG 07

Before adding the device make sure to turn on the
product and set it in “test mode” thereafter insert
SIM Card and SD card before entering the
connection stage in the app. The Camera will be
ready to be added when “Cloud” and “signal” icone
appear on the screen as showed on below pictures.
Add device
ENG 08

In the Tuya app push the Add Device key or +
key in upper right corner. Then go to Outdoor
Travel and find the 4G Camera OR push the
Scanning icon in top right corner.
ENG 09

Then take the camera, press on the menu button
and enter “Network”. Choose “Device ID” and a
QR code will appear. Scan the QR code with the
Tuya Smart App, and the product will connect.
When the product is connected you will see
“added successfully as on the picture below.
Afterwards please set the camera from “test-
mode” to “on” mode and the camera is
ready for use.
ENG 10

View & Setting
Click on the device and enter the camera
control preview interface to see the settings.
Here you have 5 main settings in the setting
menu which will be described below.
Basic function settings
Are the function you can use to set up the camera
as you prefer. Following settings are available;
“Mode”, “Video length”, “Video resolution”, “Audio
recording”, “Image size”, “interval”, “time laps”,
“multi shot” and “transfer frequency”
ENG 11

Detection alarm setting
For setting up the alarm functions you have
difference settings; “Motion detection alarm”
ON/OF and “alarm sensitivity level” where you
can adjust the sensitivity for the camera.
Power management
Information about battery level.
Store setting
Information about internal SD-card storage capacity.
Purchase of value-added services
Ability to buy cloud storage.
Video and pictures
Play back function
Will show you video recording when motion is
detected depending on mode setting.
Pictures
When the camera is activated, and “mode”
setting is set for pictures then go to Tuya smart
app main page and choose the “me” icon and
thereafter “message center” then picture will
be available to see.
ENG 12

SIM- and SD-Card
To get the full use of the camera both sim-card
and SD-card is needed.
SIM-card
For using the product you need a standard size
(the large one) 4G sim-card. Make sure there is
no pin-code on the sim-card.
SD-Card
The camera is compatible up to 256GB micro-
SD-Card. It needs to be formatted in fat32.
Notifications
When the camera are activated you will receive
notifications that it has been activated and
either video or picture will be available.
ENG 13

All APN providers should be preinstalled from
the start, if any chance the APN provider is not
added please contact [email protected] or
try to configure your self by using below
explanation.
If the camera does not recognize the APN
information on the sim-card, the screen on the
camera will show a cloud with a red marking
over. As showed below. To add APN user
please do as described below.
ENG 14

If the camera does not recognize the APN
information of the SIM card, please take out the
SD card from the camera. Put the SD card into
the computer, here you can see the file named
tmp_apnuser. Open it and fill in the Sim-card
information; IMSI and APN information into the
form. (You can see the Sim-card info in the top
corner on the camera screen). If the account
number and password are blank, you can leave
it blank but make sure to fill out IMSI and APN.
Afterwards please save the file put the SD card
into the camera and press restart. Please delete
"tmp_", but do not change the file format
ENG 15

ENG 16

Electric and electronic equipment
is marked with the crossed out
trash can symbol, seen above. This
symbol signifies that electric and
electronic equipment should not
be disposed of with other
household waste, but should be
disposed of separately.
All cities have established collection
points, where electric and electronic
equipment can either be submitted
free of charge at recycling stations
and other collection sites, or be
collected from the households.
Additional information is available
at the technical department of your
city.
ENG 17

Hereby, Denver A/S declares that the
radio equipment type WCL-8040 is in
compliance with Directive 2014/53/EU.
The full text of the EU declaration of
conformity is available at the following
internet address: denver.eu and then click
the search ICON on topline of website.
Write model number: WCL-8040MK2. Now
enter product page, and RED directive is
found under downloads/other
downloads.
Operating Frequency Range: 824-2690MHz
Max Output Power: 23dBm
ENG 18

GER 19