Denver DSB-4020 User manual

DSB-4020 IB20210503 PAGE:1
Soundbar User Manual
DENVER DSB-4020
Safety information
Please read the safety instructions carefully before using the product for the first time
and keep the instructions for future reference.
1. This product is not a toy. Keep it out of reach of children.
2. Keep product out of the reach of children and pets to avoid chewing and
swallowing.
3. Product operating and storage temperature is from 0 degree Celsius to 40
degrees Celsius. Under and over this temperature might affect the function.
4. Never open the product. Touching the inside electrics can cause electric
shock. Repairs or service should only be performed by qualified personnel.
5. Do not expose to heat, water, moisture, direct sunlight!
6. Please protect your ears against loud volume. Loud volume can damage your
ears and risk in hearing loss.
7. Bluetooth wireless technology operates within a range of about 10 m (30 feet).
The maximum communication distance may vary depending on the presence
of obstacles (people, metal objects, walls, etc.) or the electromagnetic
environment.
8. Microwaves emitting from a Bluetooth device may affect the operation of
electronic medical devices.
9. The unit is not waterproof. If water or foreign objects enter the unit, it may
result in fire or electric shock. If water or a foreign object enters the unit, stop
use immediately.
10. Only charge with supplied Adaptor. The direct plug-in adapter is used as
disconnect device, the disconnect device shall remain readily operable. So,
make sure there is space around the power outlet for easy access.
11. Do not use non original accessories together with the product as this can
make the product functionality abnormal.

DSB-4020 IB20210503 PAGE:2
What’s in the Box?
Remote Control Screws Power Supplies Aux Cable User Manual
Connecting Your Sound Bar to Your TV or other sources:
Illustration of the Soundbar connectors for different connections:
EN
EN
HDMI-ARC
HDMI-ARC
OPTICAL
OPTICAL
LINE IN
LINE IN
DC IN
DC IN
NOTE: All cables what you needed should be plugged in before Power Supplies connected.
2. Connect the Power Supplies to Sound Bar
then power Insert Power Supplies to an AC outlet.
3. Turn on your sound bar.
Placing the Soundbar on a flat and solid surface. Hold the Power button /MODE at the right side of the
sound bar or Press RED key on the remote control to turn it on. Selecting Mode (input source) as the following
instruction to enjoy your powerful sound. When the Soundbar is switched to standby, the red dot is turned on.
NOTE: 1. RESET: Hang up is solved by disconnecting and reconnected the power supplies.
2. It will be standby within 10 munities if no signal from Line In, BT, USB, ARC and Optical inputs. It also
will be standby if the low sound from Line In need to be heard within about 15cm distance.
Use HDMI cable (V1.4 above) to
connect the sound bar to the TV
ARC socket.
Use Optical cable to connect the
sound bar to the TV, DVD player or
set top box.
Connecting the sound bar
identified LINE IN to the TV with
the provided AUX cable.
A red LED will pulse on the
front of the sound bar
indicating boot up.
Sound bar
YES
NO
HD MI
TV
ARC
OPT IC AL
HD MI AUX
HEA DP HO NE
HDMI
TV
OPTIC ALHDMI AU X
HEA DP HO NE
HDMI
TV
ARC
OPTIC ALHDMI AU X
HEA DP HO NE
1a. Is an HDMI input jack on your TV labeled “ARC”?
1b. Don’t have ARC or Optical output
available on your TV?

DSB-4020 IB20210503 PAGE:3
The control panel on the Soundbar:
Symbol
Operation
Hold
Press
/MODE
Power On/
Standby
Toggle the Mode change: LINE IN

Bluetooth  USB Drive  ARC  Optical
/MUTE
Pause/Play (USB/Bluetooth Mode)
Mute / No Mute
VOL+ /
Volume up
Next USB Drive/Bluetooth Song
VOL- /
Volume down
Next USB Drive/Bluetooth Song.
Remote control buttons
Switch the product on or to standby
Mute or restore volume
EQ
Equalizer: Eq0: Normal, Eq1: Rock, Eq2: Pop, Eq3: Classic,
Eq4: Jazz, Eq5: Country, Eq6: Music
Decrease volume
Increase volume
Skip to previous audio file during USB/BT play
Pause or play USB/BT audio file
Skip to next audio file during USB/BT play
Repeat audio during USB play
MODE
Select an audio source *
*MODE (source) selection shown on the LED display.
Line In source
Bluetooth source
 Flashes if the Soundbar is not paired or connected to a
bluetooth device.

Lights up if the Soundbar is paired.
USB source when connecting to a USB drive
HDMI-ARC source
Optical In source

DSB-4020 IB20210503 PAGE:4
Importance Notice for soundbar mounting on the wall:
1) Wall-mounted installation must be carried out by qualified personnel only.
Incorrect assembly can result in severe personal injury and property damage! (If you intend to install this
product yourself, you must check for installations such as electrical wiring and plumbing, which may be
hidden inside or behind the wall.)
2) It is the installer’s responsibility to verify and confirm that the wall will safely support the total load of the
unit and wall brackets.
3) Additional tools (not included) are required for the installation.
4) Do not overtighten screws.
5) Use an electronic stud finder to check the wall type before drilling and mounting
6) The proposed height on the wall is 1.0~1.5meters
7) The strain relief (<23mm) of HDMI cable is recommended for more space during mounting.
Technical Specifications
Power consumption: 40W
Max output power: 45 W
Bluetooth version: 5.1
Operating frequency range: 2402-2480Mhz
Soundbar measurement: 80cm * 6cm * 6cm
Bluetooth name: DSB-4020
Power Supplies Information:
Manufacturer: SHENZHEN FIT-POWER TECHNOLOGY CO., LTD.
Commercial registration number: 91440300577672653M
Address: 201, NO.7 RIFU ROAD, EAST DISTRICT, BAISHIXIA COMMUNITY,
FUYONG, BAOAN SHENZHEN
Trade mark FIT-POWER
Model: TP04-180200E
Input voltage: 100-240V~
Input AC frequency: 50/60Hz
Output voltage: DC18V
Output current: 2.0A
Output power 36W
Max output power: 54W
Average active efficiency: 87%
Efficiency at low load (10%): 82%
No-load power consumption: 0.1W or less

DSB-4020 IB20210503 PAGE:5
Please notice - All products are subject to change without any notice. We take reservations for errors and omissions
in the manual.
ALL RIGHTS RESERVED, COPYRIGHT DENVER ELECTRONICS A/S
Electric and electronic equipment and included batteries contains materials, components and substances that can
be hazardous to your health and the environment, if the waste material (discarded electric and electronic equipment
and batteries) is not handled correctly.
Electric and electronic equipment and batteries is marked with the crossed out trash can symbol, seen above. This
symbol signifies that electric and electronic equipment and batteries should not be disposed of with other
household waste, but should be disposed of separately.
As the end user it is important that you submit your used batteries to the appropriate and designated facility. In this
manner you make sure that the batteries are recycled in accordance with legislature and will not harm the
environment.
All cities have established collection points, where electric and electronic equipment and batteries can either be
submitted free of charge at recycling stations and other collection sites, or be collected from the households.
Additional information is available at the technical department of your city.
Hereby, Inter Sales A/S declares that the radio equipment type DSB-4020 is in compliance with Directive
2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address:
www.denver-electronics.com and then click the search ICON on topline of website. Write model number: DSB-
4020. Now enter product page, and red directive is found under downloads/other downloads.
Operating Frequency Range: 2402-2480Mhz
Max Output Power: 40W
DENVER ELECTRONICS A/S
Omega 5A, Soeften
DK-8382 Hinnerup
Denmark
www.facebook.com/denverelectronics