Denver BTS-30C User manual

Bluetooth speaker
with handsfree function
BTS-30C
GB

- 1 -
Know your speaker
A: POWER ON/OFF
B: LINE IN (Aux in)
C: USB DC 5V
D: CHARGING INDICATOR LIGHT
E: VOLUME -
F:
"BUTTO "(bluetooth status:
Pause & Play / Hands free answer
/ Hands free hang up / MIC

- 2 -
GB
G: VOLUME +
H: STATUS INDICATOR LIGHT
(BLUETOOTH STATUS: BLUE
LIGHT, AUX IN STATUS: RED
LIGHT)
Product Specications
- Dimension & Weight
- Dimension:
Diameter: 60mm x H57mm
- Weight: 228g± 5% for speaker body
- Standard Battery: Built in
rechargeable450mAh Lithium
battery
- Music playtime: Max 3-4
hrs(based on50%-70%) voice
volume)
- Charge condition:
Charge time: 3-4 hours
Power input: DC 5V/500mA.
Speaker Specications
- Diameter: 2 inch
- Impedance: 4Ω

- 3 -
- Power output: 3W
- dBSPL: 80 ± 3dB 1W/M
Package & accessories
- Bluetooth Speaker
- USB cable
- Audio cable
- Instruction manual
Operation Instructions
1: Bluetooth speaker
Switch power on, and speaker
will have a response ring, the
blue indicator light flash and
the blue indicator also light on,
Bluetooth function is available.
The Bluetooth speaker user
name is: BTS30

- 4 -
GB
2: Aux in Switch power on,
connect 3.5mm cable to line in
port, the red indicator light on,
and the speaker is in Aux in
function.
3: Making and Answer calling
Once the bluetooth is linked with
your phone:
a)
Dial the number on your phone
b) To answer the phone, short
press the "
" button
c)
Press the " " Button to end the call.

- 5 -
4: Charging
When connect to the USB cable
(included) in, red indicator light
on, charge mode work.
The speaker can be charged
when it’s in ON or OFF status.
(We suggest to turn off speaker
when charge it.)
5.The Bluetooth speaker will
turn into snooze mode after 5
minutes unused (means do not
connect with bluetooth), and
speaker will have a continuous
warning tone. Turn on the ON/
OFF switch again, and the
speaker will turn into the normal
working mode.

- 6 -
GB
6.Long press “+“, volume up;
Short press”-”, volume down.
NOTICE:
1.The Bluetooth speaker can
only match to one signal per
time, the connection cannot be
deleted when matching. It can
only be deleted in disconnection
model.
2.It‘s not allow to show the
same equipment name in the
Bluetooth connection list, or it
will make the one in same name
can not be connected.
Points to keep your Bluetooth
energetic
- The hands free function can only
be worked in the Bluetooth mode.
- The Bluetooth speaker has a
anti signal disturb design, but
it will still be interrupted by the
high frequency device or within

- 7 -
electromagnetic eld.
Avoid to put it in such kind of
environment.
- Different user port will make
difference on the transmission
distance. Please use the qualify
Bluetooth port.
- Some cell phone music player
device does not have smooth
cache, and it will be a slightly
“POP“ tone when pause, it‘s a
normal sound.
- The disconnection of Bluetooth
is not a real time operation, and
it will be a few seconds delay
from the cell phone operation.
- When Bluetooth match is failed,
delete other Bluetooth device in
the connection list, restart the
Bluetooth speaker and search
the signal again.
- If speaker makes a loud electronic
noise, or when charging by USB
port, the red, green, blue
indicator

- 8 -
GB
light flashes in turn, please
check for the battery shrapnel,
or if any damage in the battery.
- It must install a Bluetooth
media player in the computer
when PC using the Bluetooth
speaker.
- Please pull out the AUX-in
cable before connecting to the
Bluetooth speaker, to make sure
the connection is correct.
- The speaker sound effect is
affected by battery capacity, cell
phone performance and input
media source quality. If noise,
user can download some ““0dB”
music for test in AUX-in mode, in
the distance of 1m.
- If speaker will not be used for
a long time, please keep charge
once per month, to avoid the
overconsumption of the battery
to damage the speaker.
- Do not put the
speaker in an

- 9 -
extreme cold, hot, wet or dusty
environment, or it will be damage
to the function and device.
- Do not use the speaker in an
extreme dry environment, to
avoid the static damage.
- Do not put the speaker into
water or re.
- Do not scratch the speaker to
protect the interface and battery.