Denver SW-162 User manual

SW-162SMARTWATCH
User’s Guide
www.denver-electronics.com
www.facebook.com/denverelectronics
ENGLISH
If the user manual is not printed in your local
language, then please visit our website tosee if it is
available online for the device you have. Our
website address is: www.denver-electronics.com

ENG-1
1. Quick start guide
Overview
1. Touch screen
2. Function button
3. Heart rate sensor
4. Charging plate
5. Temperature sensor
To charge the smart watch,
connect the charging clip of
the USB cable to the
charging plate on the back
of the smart watch. If
successfully connected, the

ENG-2
charging icon appears on
the screen.
Install “Denver Smart Life”
app on the phone
Search and install the
“Denver Smart Life” app
from Google Play or App
Store. Or scan the following
QR code to directly install
the app.
Android
IOS

ENG-3
Connect the smart watch
with the phone
1. Enable Bluetooth on your
smart phone.
2. Open the “Denver Smart
Life” app on your smart
phone, and then fill in all
the requested information
in the “Settings” menu.
3. Tap “Connect device” in
the “Settings” menu.
4. Select the smart watch
icon to connect.
5. Choose your device name
to connect it with your
phone.

ENG-4
Unbind the smart watch
with mobile phone
1. Open the “Denver Smart
Life” app on your smart
phone.
2. Tap “Disconnect device” in
the “Settings” menu and
confirm “OK”.
3. To disconnect your smart
watch with an iPhone,
click “Disconnect device”
in the “Settings” menu of
the “Denver Smart Life”
app, and go to the
Bluetooth settings on your
iPhone, then access and
select the “Forget This
Device” option.

ENG-5
Operation introduction
⚫You can raise your hand or
press the function button
to turn on the screen.
⚫Press and hold the watch
face screen, then slide left
or right to change the
watch face.
⚫Press and hold the
function button to turn on
the smart watch when
powered off.
2. How to use
⚫Turn on: Press and hold
the function button for 3
seconds.
⚫Go to menu screen: Slide
right or left in the watch

ENG-6
face screen.
⚫Select a function: Slide
up/ down or right/left in
the watch face and tap
the icon.
⚫Confirm: Tap the icon.
⚫Exit the menu: Slide the
screen from left to right.
⚫Return to the watch face:
Press briefly the function
button in any screen.
⚫Check messages: Slide
from down to up in the
watch face screen.

ENG-7
3. Menu navigation
After turning on the smart
watch, the watch face
screen is displayed.
When the watch face
screen is displayed:

ENG-8
1. Go to the menu screens
a. Slide right or left in the
watch face screen to enter
the menu screens.
b. Slide up and down or right
and left to switch the
menu screens.
c. Tap the icon to enter the
sub menu. Slide from left
to right to return to the
previous menu.
2. Go to the messages
shortcut screen
Slide from down to up in
the watch face screen.

ENG-9
3. Go to other shortcuts
screen
Slide up and down in the
watch face screen.
4. Functions
Watch face screen
You can press the function
button to go to the watch

ENG-10
face screen quickly.
If you want to change the
watch face of your smart
watch, press and hold the
current watch face for 3
seconds, then slide left or
right to go through the
different watch faces and
choose the one you like.
Shortcut
⚫Screen brightness
You can tap the brightness
icon to adjust (+/-) the
screen brightness.

ENG-11
⚫Find phone
If your smart watch is
connected with Denver
Smart Life app, you can find
your phone by tapping this
icon and your phone will
ring.
⚫Shut down
You can shut down your
smart watch by tapping this
icon.
⚫System
You can check the system
of your smart watch by
tapping this icon.

ENG-12
Multi-Sport
Tap this icon to enter the
multi-sport mode. The
smart watch has 6 sports
modes: walking, running,
cycling, indoor run, hiking
and swimming. Choose a
sport mode you want, and
then do sports. The smart
watch records your exercise
data.
If you want to end the

ENG-13
sports, slide the screen to
right and tap the “√” icon
to finish your sports and
save the data. The smart
watch displays your
exercise data. If you’ve
connected your smart
watch with the “Denver
Smart Life” app via
Bluetooth, you can also
check your exercise data in
the app.
Note: If the exercise time is
less than 5 minutes, the
data cannot be saved.

ENG-14
Body temperature monitor
Tap the body temperature
icon to monitor your
current surface
temperature and body
temperature. To exit the
body temperature monitor,
slide the screen to right.
Please notice –this is not
medical grade. If you are
unsure, always use a
standard thermometer.
Measurement tolerance 0.4
degrees Celsius.

ENG-15
Heart rate monitor
Tap this icon to monitor
your current heart rate. To
exit the heart rate monitor,
slide the screen to right.
If you’ve connected your
smart watch with the
“Denver Smart Life” app via
Bluetooth, and turn on
“Healthy detection”in
advanced settings of the
app, you can also check
your heart rate data in the
app.

ENG-16
Sleep monitor
The smart watch
automatically monitors
your sleep between 9:30
p.m. and 11a.m.
When you get up the next
day, the smart watch
displays your sleep report
about the time of total
sleep, light sleep and deep
sleep. If you’ve connected
your smart watch with the
“Denver Smart Life” app via
Bluetooth, you can also
check more detailed sleep

ENG-17
report in the app.
Alarm
You can set reminders in
the “Denver Smart Life”
app. When alarm time is up,
the alarm icon is animated
and the smart watch
vibrates.
Messages
Slide the watch face from

ENG-18
down to up, and then you
can check your phone calls,
SMS, QQ, WeChat,
Whatsapp, Facebook and
Twitter notifications, etc.
The messages will be
automatically deleted by
tapping the screen.
Weather
If you’ve connected your
smart watch with the
“Denver Smart Life” app via
Bluetooth, the smart watch
displays the weather
forecast.