Denver BFH-150 User manual

BFH-150 FITNESS BAND
User’s Guide
www.denver-electronics.com
www.facebook.com/denverelectronics ENGLISH
If the user manual is not printed in your local language, then please
enter our website to see if it is found online under the model you have.
The website address is: www.denver-electronics.com

ENG-1
1. Features
0.42" OLED Display
Built-in HR sensor, monitor your heart rate
Monitor your daily activity and sleep
Built-in sedentary reminder
Reminder of SMS, emails, calendar events and social media
activity
Smart wake-up, raise or shake your arm to wake up the device
Built-in 55mAh Li-poly battery, up to 7 days standby time
Compatible with iOS8 or above and Android 5.0 or above
2. Download Denver Smart Life app
The fitness band needs to pair with the smart phone through app.
Search for Denver Smart Life APP on Apple App Store or Google
Play store for android version, or scan below QR code to install
Denver Smart Life APP.
Android
iOS
This device is enabled with Bluetooth 4.2, and support phone
with Android5.0/ iOS8 or above
3. Pair the device
Please make sure the Bluetooth is ON in your smart phone
settings and then open app “Denver Smart Life”. Tap “Connect the
device”on Settings --> Select the image of “BFH-150”for

ENG-2
connection.
When searching and pairing device, please press on the touch
area of device and activate the device (screen on). App will search
the device automatically, select the device name in the smart
phone searching list and connect the device to the app.
After binding successfully, all information on device will sync on
APP, including time, steps, heart rate and notifications reminder.
4. Device Activate & Charge
Make sure the device is charged before initial use. In case device
is low on battery, connect the device to the charger clip and
connect USB cable to your PC. The device will automatically boot
up (please clamp the charging clip to the back 2 points position of
bracelet as below)
5. How to use
Touch Area
Short press: function switch
Long press: Turn on/off, reset

ENG-3
Once the device connected to the app successfully, it will sync
your activities and sleep data automatically, please press the
touch area on the device to switch into different display modes as
following:
Time Mode
Steps
Distance
Calories
Sleep Monitor
The fitness band can record your
sleep from 22:00 to 9:00. Sleep data
can be found in “Denver Smart Life”.
Heart rate Monitor
Bluetooth on
Note: Long press touch area:

ENG-4
Turn on
Reset
Turn off

ENG-5
Please notice - All products are subject to change without any
notice. We take reservations for errors and omissions in the
manual.
ALL RIGHTS RESERVED, COPYRIGHT DENVER ELECTRONICS A/S
Electric and electronic equipment and included batteries contains
materials, components and substances that can be hazardous to
your health and the environment, if the waste material
(discarded electric and electronic equipment and batteries) is not
handled correctly.
Electric and electronic equipment and batteries is marked with
the crossed out trash can symbol, seen below. This symbol
signifies that electric and electronic equipment and batteries
should not be disposed of with other household waste, but
should be disposed of separately.
As the end user it is important that you submit your used
batteries to the appropriate and designated facility. In this
manner you make sure that the batteries are recycled in
accordance with legislature and will not harm the environment.
All cities have established collection points, where electric and
electronic equipment and batteries can either be submitted free
of charge at recycling stations and other collection sites, or be
collected from the households. Additional information is available
at the technical department of your city.

ENG-6
Hereby, Inter Sales A/S declares that the radio equipment type
BFH-150 is in compliance with Directive 2014/53/EU. The full text
of the EU declaration of conformity is available at the following
internet address:
Please enter: www.denver-electronics.com and then click the
search ICON on top line of website. Write model number: BFH-
150
Now enter product page, and red directive is found under
downloads/other downloads.
Operating Frequency Range: 2.402 GHz—2.480 GHz
Max Output Power: 4.0 dBm
Warning Lithium battery inside
DENVER ELECTRONICS A/S
Omega 5A, Soeften
DK-8382 Hinnerup
Denmark
www.facebook.com/denverelectronics

BFH-150 FITNESSBAND
Bedienungsanleitung
www.denver-electronics.com
www.facebook.com/denverelectronics
DEUTSCH

GER-1
1. Funktionen
0, 42” OLED display
Integrierter Herzfrequenzsensor; überwacht Ihre Herzfrequenz
Überwachen Sie Ihre täglichen Aktivitäten und Ihren Schlaf
Integrierte Erinnerung für Bewegungsinaktivität
Erinnerung an SMS, E-Mails, Kalendereinträgen und Social-
Media-Aktivitäten
Intelligentes Aufwachen; heben oder schütteln Sie Ihren Arm,
damit Ihr Gerät aufweckt
Eingebaute 55 mAh Lithium-Polymer-Batterie, bis zu 7 Tagen
Standby
Kompatibel mit iOS 8 oder höher und Android 5.0 und höher
2. Herunterladen der Denver Smart Life-App
Das Fitnessband muss über die App mit dem Smartphone
verbunden werden. Suchen Sie im Apple App Store oder bei
Google Play nach der Android-Version der Denver Smart Life-App
oder scannen Sie nachfolgenden Code, um die Denver Smart Life-
App zu installieren.
Android
iOS
Dieses Gerät ist mit Bluetooth 4.2 ausgerüstet und unterstützt
Android 5.0 / iOS 8 oder höher
3. Gerät koppeln