DEPURECO ECOBULL Instructions for use

This manual is an integral part of the vacuum.
Carefully read this manual and its attachments. Knowing the instructions contained in it is
crucial for using the vacuum and carrying out maintenance operations under full safety
conditions. rev. 0 dated 15-11-2016 !
1 !

partially or totally by any means (gra
This document is the exclusive pro
DEPURECO INDUSTRIAL VACUUM
IMPORTANT - The DEPURECO na
Scrapping!................................ !
Troubleshooting............ !
H!filter!(or!HEPA!filter) !
Replacing!the!filter!....... !
General!safety!regulatio !
Information!notes!......... !
MAINTENANCE!SECTION !
Storage!-!decommission !
Inserting!and!locking!the !
Emptying!the!refuse!container !
Operating!cycle............. !
Description!of!the!contro !
OPERATION!SECTION!..... !
Installation!.................... !
Unpacking!.................... !
Handling!....................... !
HANDLING,!UNPACKING !
Applied!Directives!................................ !
Residual!risks!............... !
Safety!plates!and!symbo !
Safety!requirements!................................ !
Information!on!safety!... !
SAFETY!SECTION!............ !
Warranty!................... !
Technical!data............... !
Noise!level!.................... !
Allowed!environmental !
Intended!use!.................. !
Identification!plate!........ !
Manufacturer's!identific !
Optional!parts!............... !
Identification!of!the!mai !
Preface!.......................... !
INFORMATIVE!SECTION !
................................ !
................................ !
................................ !
..............................! !
................................ !
................................ !
................................ !
Summary
MS S.r.l.
3 !
..................................!4
..................................!4
..................................!6
..................................!6
..................................!7
..................................!7
..................................!7
..................................!7
..................................!8
..................................!9
................................!10
................................!11
...........................................! !
................................!14
..............................! !
.............................................! !
HANDLING,!UNPACKING!AND!INSTALLATION!SECTION!……....!.............................! !
..............................! !
..............................! !
..............................! !
..............................! !
..............................! !
................................ !
................................ !
................................ !
................................ !
................................ !
............................................................ !
are property of
ot be reproduced either
thorisation.
11
12
16
16
17
17
18
20
22
22
23
26
28
28
29
29
30
32
35
36
37
1.
!........................................................................ !
1.1 ......................................................................... !
1.2 in!parts!............................................................ !
1.3 ......................................................................... !
1.4
cation!data!........................................................ !
1.5 ......................................................................... !
1.6 ......................................................................... !
1.7 !conditions!...................................................... !
1.8 ......................................................................... !
1.9 ......................................................................... !
1.10 ......................................................................... !
2. ......................................................................... !
2.1 ......................................................................... !
2.2 ......................................................................... !
2.3
ols!.................................................................... !
2.4 ......................................................................... !
2.5 ................................................................................ !
3. G!AND!INSTALLATION!SECTION!…….... !
3.1 ......................................................................... !
3.2 ......................................................................... !
3.3 ......................................................................... !
4.
................................................................................................ !
4.1 ols!................................................................... !
4.2 ......................................................................... !
4.3 Emptying!the!refuse!container!................................................................ !
4.4 e!refuse!container!........................................... !
4.5 ning!.................................................................. !
5. N!...................................................................... !
5.1
......................................................................... !
5.2 ons!.................................................................... !
5.3 ......................................................................... !
5.4 )!-!..................................................................... !
5.5 ......................................................................... !
5.6 ................... ! ...................... !
ame and logo used in this document refer to and a
operty of DEPURECO S.r.l. Therefore it may no
aphic, computer, etc.), without the Company's aut

In the event it is lost or damaged, yo
This manual is integral part of the va
This specific model has undergone
This manual provides all the necess
immediately at the entrance to the f
The vacuumed material tends to s
We recommend reading carefully
It includes information, recommenda
We have prepared this manual to all
We thank you for having chosen
ON
before using it for the first time.
lproperties of your machine.
y; !
otection.
or extracting dust and processing residues.
r placed above the container.
models:
he following filters:
tenance.
URECO).
sing an EcoBull series
achine.
se of the vacuum, which
ceded by the following
t of the deflector placed
d by the air flow and are
our vacuum.
operation and durability
s demolition.
NDUSTRIAL VACUUMS
1. INFORMATIVE SECTIO
1.1 Preface
Dear Customer
n DEPURECO and congratulations for choos
DEPURECO vacuum.
low you to fully appreciate the qualities of this ma
We recommend reading it carefully b
ations and important warnings concerning the us
will help fully exploiting the technical
the messages, warnings and indications prec
symbols:
for personal safety;
for vacuum integrity
for environmental pro
This document has been designed fo
settle at the bottom of the container as a result
filter chamber; finer dust particles are transported
deposited on the surface of the filter
This manual describes the following
EcoBULL
The vacuum can be equipped with th
sary information for the use and maintenance of yo
e strict testing to ensure maximum reliability. Its
will depend on proper use and maint
acuum and must accompany it at all times, until its
ou can request another copy from DEPURECO IN
S.r.l. (hereafter simply called DEPU
4 !

This manual must ac
This manual must be kept in a place
contain any Substances of Very High
In compliance with Regulation 190
The topics covered in this manual a
For easier consultation, this manual
Some details shown in the figures in
The technical information containe
hics, text and illustrations is prohibited by law.
sure maximum clarity.
chnical file archived at DEPURECO.
urt of Turin (Italy).
PURECO and must be
um; this is because some
pecific graphic symbol.
tive 2006/42/CE and the
hat its products do not
t.
in charge of running and
sold!
ed in this manual is exclusive property of DEP
considered confidential.
Reproduction, even partial, of graph
n this manual can differ from those on your vacuu
components can be removed to ens
is divided into sections that are identified by a sp
are those expressly required by Machinery Direct
technical data are taken from the tec
07/2006/EC (REACH), DEPURECO !! declares th
h Concern (SVHC) included in the Candidate List
e that can be easily accessed by the personnel i
maintaining the vacuum.
Any dispute will be heard by the Cou
ccompany the vacuum even in the event it is s
5 !

DEPURECO provides a wide range
main parts
cuumed material
negative pressure indicator
tion of the vacuum.
1.2 Identification of the m
1. on/off commands
2. grip for handling
3. filter chamber
4. filter shaking lever
5. suction nozzle
6. collection container for vac
7. container release lever
8. accessory holder
9. blower
10. negative pressure indicator
1.3 Optional parts
of optional accessories, according to the applicat
6 !

The work environment must be clean
suspended powders, etc.) at a room
To ensure proper operation, the va
This model has been designed, ma
The data on the vacuum identificatio
ification data
MS S.r.l.
NO (TO) - ITALY
nd/or dry dust and shavings.
OPER .
tal conditions
n with the manufacturer
al industrial extraction of
s (Rain, hail, snow, fog,
a humidity below 70%.
explosive atmosphere.
1.4 Manufacturer's identi
DEPURECO INDUSTRIAL VACUUM
C.so Europa 609 – 10088 VOLPIAN
Tel. [phone]
Fax [phone]
e-mail: [e-mail]
website: www.depureco.com
VAT No. 02258610357
1.5 Identification plate
on plate must be referred to in any communication
or the dealer.
1.6
Intended use
anufactured and protected solely for professiona
non-flammable and non-toxic wet an
Any other use is considered IMPRO
1.7 Allowed environment
acuum must be protected from weather agents
m temperature ranging between 5 and 45 °C and a
n, suitably lit and must not give rise to potentially
7 !

Under these condi
personal protective
For sound pressure
Photometric tests carried out on thes
ks arising from noise exposure.
e level of
st wear suitable
dividual hearing
ate training and
1.8 Noise level
se specific models have shown a sound pressure
ECOBULL 72 dB(A)
Attention!
e levels above 85 dB(A), exposed workers mus
e equipment (PPE), such as type-approved ind
protection.
itions, workers must be provided with adequa
information on ris
8 !

aging weight = 18 Kg
1.9 Technical data
POWER
TENSION
DEPRESSION
MAX AIR
FLOW
INLET
FILTER
SURFACE
NOISE
LEVEL
BIN
WEIGHT
DIMENSIONS
(*) weight without packaging - packa

DEPURECO shall not be held liable
The following are excluded from th
Should the complaint be unjustifie
Defects that are not evidently due to
The purchase receipt must be show
Repairs are made solely at our pre
During the warranty period, DEP
equipment, accessories or compone
DEPURECO guarantees this mode
anty period).
manufacturing defects.
purchaser, unless otherwise agreed upon).
ng of operating elements.
hipment.
.
with the instructions contained in this booklet or
peration of the vacuum.
urt of Turin (Italy).
ated in the receipt upon
authorised third parties,
CO are used or the serial
e of charge parts and
t be delivered ex works
g out the repair and must
lely at our premises or at
hall be charged to the
rt, negligence, abnormal
cts caused by misuse or
1.10 Warranty
el for 12 months from the date of purchase indica
delivery of the product.
The warranty is null and void in the event that the vacuum is repaired by una
ents not supplied or not authorised by DEPUREC
number is removed (during the warra
PURECO undertakes to repair or replace free
components, which prove to have m
emises or in specific Service centres and must
(transport costs are charged to the p
The warranty does not cover cleanin
wn to the authorised technical personnel carrying
accompany the vacuum during its sh
omaterials or manufacturing will be examined sol
a specific Technical Service Centre.
ed, all repair and/or replacement expenses sh
purchaser.
he warranty: accidental damage due to transpor
use, improper use, non-compliance arising from phenomena
that do not depend on normal use/op
e for any injuries to persons or damage to objec
improper use of the vacuum.
Any dispute will be heard by the Cou
Protect your purchases by joining the exclusive “warranty plus” program
www.depureco.com, fill
10 !

are no dangers for oneself and the o
techniques not expressly provided fo
compensating possible risks related
DEPURECO designs and manuf
Failure to comply wit
Failure to comply wi
Failure to comply wi
Safety warnings and precautions are
untrained personnel or to failure t
DEPURECO shall not be held liabl
and repairs of the vacuum. Accid
Failure to comply with basic safety s
risks related to the
amendments, the
In compliance w
y
ate training is crucial to this end.
n this manual.
ention to these hazard warnings to prevent
other people.
by the following symbol:
bsequent additions and
and train workers on the
e to protect their own and
during use, maintenance
g potentially hazardous
r use of the vacuum by
al safety standards and
uct itself.
operator.
vacuum.!
environment.
h care, identifying and
edures, work methods or
re beforehand that there
ot be held liable.
2. SAFETY SECTION
2.1 Information on safety
with Italian Legislative Decree 81/08 and sub
e Safety Manager is obliged to educate, inform a
e use of the vacuum, in order for them to be able
others' safety.
standards and precautions can cause accidents d
dents can frequently be avoided by recognising
situations before they occur. Adequa
le for accidents or damage due to the improper
to comply, even partially, with the occupationa
intervention procedures contained in
e indicated in this manual as well as on the produ
Operators must pay special atte accidents with serious
consequences for themselves and o
Safety messages are emphasised b
Attention!
ith these messages can cause injuries to the o
Attention!
ith these messages can cause damage to the v
Attention!
th these messages can cause damage to the e
factures its equipment and accessories with
d to their use. In the event that equipment, proce
or by DEPURECO are used, it is crucial to ensur
others, notwithstanding that DEPURECO shall no
11 !

When using the industrial vacuum
Periodically verify the integrity of
Do not touch electric wires, switc
Extensions, press-fit plugs and a
Never put your hands inside the
• Do not open the refuse collection
Do not wear loose or baggy cloth
Ensure that all the guards and pr
Do not vacuum petrol or flammab
Do not vacuum lit cigarette butts:
Do not, under any circumstance,
Avoid using it in the proximity of n
Avoid prolonged contact with solv
Avoid using flammable or toxic
Keep the vacuum clear from fore
This vacuum is not intended to be
The equipment must be electrica
This vacuum is suitable for indus
• This vacuum can only be used by
C
the various operatio
Every section lists f
operators as an ove
the vacuum. Howev
The indications belo
n occur while operating
common sense of the
hops.
earthing.
bjects that could damage
nd alcohol for cleaning
entilation.
fety devices are properly
ould get easily caught or
lifting handle can cause
or body in particular) can
2.2 Safety requirements
Attention!
ow are important to prevent hazards that can
ver, they cannot replace the expertise and c
erall framework for accident prevention.
further safety requirements specific for
ons.
CAUTION!
y adequately trained adults.
• strial use, such as: factories, warehouses, worksh
• ally connected to a mains equipped with efficient e
• e used in corrosive or explosive environments.
• eign bodies, such as debris, oil, tools and other ob
its operation and cause injuries.
• c solvents, such as petrol, benzene, ether an
operations.
• vents and inhaling their vapours.
• naked flames or heat sources; ensure suitable ve
• use the vacuum without a filter.
• : they could ignite the filter.
• ble liquids in general.
• rotection devices are in place and that all the saf
installed and efficient.
• hing, such as ties, scarves, ripped clothes that co
trapped in the vacuum.
n container while the vacuum is operating.
• container's positioning guides: movement of the
crushing of the fingers.
• adapters are prohibited.
• Do not climb on the vacuum.
• ches, buttons, etc., with wet hands.
• the power cord.
• m, some components (motor terminal box, moto
reach high temperatures.
12 !

Do not activate with
personal
containers, must b
Emptying and main
This vacuum can co
In the event it is lost or damaged
This manual must always be ke
thereby nullifying this certification
Structural damage, alterations o
DEPURECO shall not be held lia
verify that the safety requireme
In the event that the Customer in
devices and protective guards inv
of the procedure, normal operati
• During the operations to restore
e equipment.
e must ensure at the end
n particular, of the safety
vacuum, it is essential to
met, notwithstanding that
capacity of the vacuum,
cle and for clarifying any
of the dust collection
nnel wearing suitable
original work conditions, the personnel in charge
ing and safety conditions of the vacuum and, in
volved in the operation.
• nstalls a tool not supplied by DEPURECO on the v
ents of Machinery Directive 2006/42/CE are m
able for problems caused by the use of that part.
• or improper repairs can modify the protective c
n and releasing DEPURECO from any liability.
• ept at hand for consultation on the operating cyc
doubts.
• d, request another copy from DEPURECO.
Attention!
ontain harmful dust.
ntenance procedures, including the disposal
be carried out only by specialised person
protective
hout a complete filtering system.
13 !

Lock the container
Never place your h
Upper limb crushin
In the event that a pl
Clean them with a cl
Plates with safety symbols and mess
ng BOTH HANDS
ention!
mbols
ation and the nature of the hazard.
y messages are perfectly legible.
lates requesting them from DEPURECO.
d to the new piece.
use container in place under the vacuum.
ng.
phtha or petrol.
sure that
use container in place
ntainer while inserting
.
2.3 Safety plates and sym
sages are applied to the vacuum and its packagin
These pages show their precise loca
Attention!
Ensure that all safety
loth, water and soap. Do not use solvents, nap
Replace damaged pl
late is located on a piece that is replaced, ens
a new plate is affixed
Att
ng hazard while inserting and locking the refu
under the vacuum.
hands between the vacuum and the refuse con
and locking the refu
in place by means of the dedicated lever, usin
14 !

packaging before h
Carefully read the
carrying out
Carefully rea
e using the vacuum or
Attention!
ad this use and maintenance manual before
maintenance interventions.
Attention!
e instructions on the
handling and unpacking
the vacuum.
15 !

Reference standards, including their
DEPURECO shall n
It is strictly prohib
The user must immediately replace a
With reference to risk analysis and i
Comply with the limitations indicated
The vacuum must not be used in en
Risk of improper use in presence
Pursuant to Italian Legislative Decre
and with the safety standards in fo
DEPURECO recommends complyin
devices integrated in the vacuum.
vacuum and/or its components can be:
ce on live parts
orth by said Legislative Decree.
ers and gas.
id environments
warns about this hazard.
ty pictograms
erning graphic symbols.
ackaging.
ohibition.
e vacuum described in this manual:
Directive
netic Compatibility Directive
ystem.
endations in this manual
able personal protective
d to operate on live parts,
es
ds that can evaporate at
n section 1.7 “Allowed environmental conditions”.
labels on the vacuum, in
mage.
he vacuum and/or its
the event of failure to
e DEPURECO Quality
2.4 Residual risks
ng with the instructions, procedures and recomme
orce. DEPURECO also recommends using suita
equipment as well as the protection
The residual risks analysed on the v
Electrical risks during maintenanc
ee 81/08 – articles from 80 to 87 – it is prohibited
notwithstanding the exceptions set fo
of liquid, explosive and flammable substance
nvironments containing liquid substances or liquid
room temperature, flammable powde
Risks related to operation in humi
d in this manual, in section “Allowed environm
Risk of crushing the upper limbs.
A safety pictogram on the vacuum w
Risks of misinterpretation of safet
identification, DEPURECO has installed hazard l
compliance with the standard conce
any safety plate made illegible due to wear or dam
Attention!
bited to remove the safety plates from th
components and pa
not be held liable for the vacuum's safety in
comply with this pro
2.5 Applied Directives
The following Directives apply to the
- 2006/42/EC Machinery D
- 2014/30/EU Electromagn
r binding requirements, are managed through the
and Environmental Management Sy
16 !

3. HANDLING, UNPACKING AND INSTALLATION SECTION
3.1 Handling
Attention!
The instructions for transporting and unpacking the vacuum correctly are shown
also on the packaging.
The instructions below also include the operations to be carried out in the event that the vacuum
must be packed or unpacked again for subsequent transport.
Dimensions of the packed vacuum:
The vacuum must be lifted and handled only using a forklift whose load bearing
capacity is suited to the weight.
When using a forklift, lift the load 200 mm off the ground and swing backwards.
Always keep the height of the working environment in mind when lifting loads.
Before starting any movement, ensure that the area is cleared and that there are no moving objects on the
packaging. For lifting and handling operations, comply with the occupational safety standards in force and
with the normal forklist driving instructions.
17 !

with a screwdriver remove the
Cut and remove the two pack
3.2 Unpacking
- aging fasteners,
- e staples that secure the carton to the pallet
- remove the carton
18 !

using the same faste
In the event of subs
Keep the pallet and
separa
The c
- loosen and remove the fasten
ed to the pallet
ning screws and brackets from both sides
cardboard packaging is recyclable and should be collected
ately to prevent environmental impact.
Attention!
the fastening brackets.
sequent transport, the vacuum must be secure
ening system.
19 !

dealer (or DEPURECO) for informa
Note: the hose with its terminals and
insert the accessory according
The vacuum is already equipped wit
In the event that one or more co
preventive visual ins
Before installing the
d agree upon the actions to be taken.
h a terminal in the suction nozzle
gh
ing
h installation and inform
y dust or debris.
the hose
TANDARD. Contact your
that can be used on this
3.3 Installation
Warning!
e vacuum, it is important to carry out a thoroug
spection to identify any damage occurred duri
transport. !
omponents are damaged, do not continue with
DEPURECO about the anomaly and
th a suction filter, which allows extracting only dry
- Insert the hose equipped with
- g to the type of extraction on the opposite side of
d the suction accessories are not included as ST
ation regarding the various types of OPTIONAL t
specific model.
20 !

The socket to power the vacuum m
Ensure that the power supply line c
carried out by a qualified electrician.
d.
o the socket.
ug into the socket with wet hands.
ns is not allowed.
ated on the identification
h in compliance with EU
The following operation must be c
corresponds to the voltage and frequency indica
plate and that it is efficiently earthed
must be protected by a mains disconnect switch
standards.
Insert the plug (standard supply) into
Attention!
Do not insert the plu
The use of extension
21 !