DEVI devireg 550 User manual

Article: 08090705
Version: 01.02
www.devi.com

the nation’s favourite for
PLUMBING & HEATING SUPPLIES
SECURE PAYMENTS
shop online with confidence
FREE SHIPPING
on all orders over £100 to mainland UK
FINANCE AVAILABLE
spread the cost with low interest rates
PRICE MATCH
always get the best deals available
Boilers
Radiators
Heating controls

Cylinders
Fires
Renewable energy
Bathroom suites
Kitchen sinks & taps
Showers
Wet rooms
Towel warmers
Bathroom furniture
& much more
HUGE REDUCTIONS
we have
ON THOUSANDS OF ITEMS
0844 800 3460
CALL US ON
visit our website
plumbnation.co.uk

User’s Guide - devireg™ 550 Thermostat
GB

About the thermostat
Pages 2 - 5
Set weekday and clock
Pages 10 - 11
Set temperature
Pages 12 - 13
Set periods with lowering of temperature
Pages 14 - 16
User’s Guide - devireg™ 550 Thermostat
Configurations
Pages 6 - 9

1
Your property has been installed with a DEVI electric
underoor heating system. DEVI is Europe’s leading
under oor heating manufacturer, with over 45 years
experience. We have condence that you will be satis-
ed with your new system.
DEVI brings you….
An invisible heating solution - A concealed
heat source opens up greater opportunities for deco-
rating and furnishing.
Optimum comfort - DEVI brings you the luxury
and comfort of a warm oor as well as a pleasant
room temperature. A radiator system throws heat
up at head height which then travels further up to
the ceiling only to travel downwards and return as a
cold dra around your feet. DEVI underoor heating
provides appropriately pleasant warmth for your feet,
body and head.
Economic running costs- e intelligent DEVI
thermostat ensures an accurate temperature control
with minimal energy use. With your DEVI system
there is no need for costly regular maintenance.
Durability - We provide you with a ten year gua-
rantee on all our mats and cables, and a two year war-
ranty on our thermostats. Practically speaking you
can count on DEVI heating cables and mats lasting
as long as the house in which they are installed - and
that is without having to maintain them.
Hygiene - As DEVI
produces only very
gentle air circulation, the
amount of travelling dust
particles is reduced con-
siderably; a great relief
for people with allergies
or asthma. ere are also
no dangerous fumes such
as carbon monoxide ge-
nerated by the system. 24
12
618
21 3
15 9
00:00
฀฀฀฀฀฀Your DEVI under floor heating system

2
1
2
3
4
5
About the thermostat
User’s Guide - devireg™550 Thermostat
Introduction
devireg™ 550 is an adaptive temperature control-
ler, specially designed for oor heating systems.
It can, however, also be used for other heating
systems (e.g. with power heating units).
e devireg™ 550 will measure the radiant com-
fort from the oor combined with the comfort
from the air temperature in the room to oset
the outside weather condition. is means that
as soon as you have set your devireg™ 550 at
your desired comfort temperature, devireg 550
will then automatically adjust the heating to
meet your comfort levels, regardless of changing
weather conditions.
devireg™ 550 is also capable of detecting a sud-
den temperature drop in the room. Instead of
switching the heating on to immediately com-
pensate, the devireg™ 550 uses the information
stored and then checks if this sudden drop of
temperature may be caused by for instance a
window that has been opened for 10 minutes.
Even the programming of economy temperatu-
res (i.e. lowering of temperature during the night
and when you are at work) is very simple. You
do not have to calculate how much earlier the
heating should start in order to reach a specic
temperature at a specic time. Just tell the devi-
reg™ 550 when you want the comfort tempera-
ture, and the devireg™ 550 will take care of the
rest. By identifying the rate of heat loss from the
room, the devireg™ 550 knows when to start hea-
ting in order to achieve the selected temperature
at exactly the right time.
devireg™ 550 - the thermostat that thinks!

3
About the thermostat
Symbol for timer On
Symbol for frost protection
Numerical display
for time, temperature,
text, etc.
Weekdays
Flashing point for actual time
Symbol for setting of clock Symbol for timer programming
24 hour clock ring which shows
actual time and timer program
Indication of AM/PM time at
12 hour clock
Symbol for degrees
Symbol indicating that the room
temperature is below the required
temperature (set-point).
24
12
618
21 3
15 9
00:00
฀฀฀฀฀฀Button

4
1
2
3
4
5
User’s Guide - devireg™550 Thermostat
Thermostat button
You can use the button on the thermostat in
three dierent ways:
- You can turn it.
- You can press it.
- You can press and hold it for a certain number
of seconds.
x sec.

5
About the thermostat
Switch timer function on/o
e timer function is used for automatic switch-
ing between periods with normal (comfort) tem-
perature and periods with lowering of tempera-
ture (e.g. at night). When switched on, a timer
symbol (clock) is shown at the top of display.
- To switch the timer function o, press button.
- To switch the timer function on, press button
again.
Read more about how to set periods with lower-
ing of temperature (e.g. at night) on page 12.
Clock ring
e markings on the clock ring indicate
periods with normal desired temperature
and periods with lowering of the temperature
(e.g. at night). e ashing point indicates
the actual time of day (every half hour). 20:0 C

User’s Guide - devireg™550 Thermostat
6
1
2
3
4
5
Configurations
1
2
3
4
5
User’s Guide - devireg™550 Thermostat
Switch thermostat on/o
Before you can switch the thermostat o, the
timer function (indicated by timer symbol on
the thermostat display) must be deactivated.
Pressing the button switches the thermostat
between timer mode and manual mode.
To turn the thermostat o, it has to be set to
manual mode. Once set to manual mode, rotate
the button anti-clockwise
past +5°C (1 by
scale), until OFF is displayed.
To switch the thermostat on again, raise the tem-
perature above +5°C (1 by scale). is is done by
turning the button clockwise .
If the devireg™ 550 only uses a
oor sensor, the display will not show
the required temperature (5° to 35°), but
a scale from 1 to 10 (each whole number repre-
sents 5°C at oor temperature).
OFF
24
12
618
21 3
15 9
is situation applies to bathroom and oor
warming applications.

7
Configurations
In some situations you may be required to con-
gure the thermostat.
If the thermostat is displaying ‘CODE’, you will
be presented with just step 1 and
step 4, complete these steps as described below.
Once you have either completed steps 1 and 4,
or the controller is displaying something other
than ‘CODE’, you must press and hold the but-
ton until the word ‘CODE’ is displayed and
follow the steps below:
Step 1-ermostat access. Rotate button to se-
lect code 0044 and then press button once.
Step 2-Operating mode.
Rotate button to select ‘ALO’ and then
press button
Configurations
1
2

User’s Guide - devireg™550 Thermostat
8
1
2
3
4
5
1
2
3
4
5
User’s Guide - devireg™550 Thermostat
Step 3-Temperature readout. Rotate button to
select °C and then press button.
Step 4 -Sensor selection. Rotate button to select
‘rFS’ to activate the oor and air sensors, then
press button. For bathroom and oor warm-
ing applications, please select FS (Floor
Sensor).
Step 5- Maximum oor.
At ‘nt’ rotate button to select the maximum core
oor temperature, then press button.
Important. Please see page 18 for maximum
core oor temperature settings specic to
your oor nish.
Step 6-OFFS.
is should be set to 0.0°C, if this is the case,
press the button to continue, if not- adjust set-
ting and continue.
3
4
5
6

9
ConfigurationsConfigurations
Step 7-O periods.
‘LO’ should be displayed, you should rotate dial
to select -30°C, then press button.
Step 8-Clock display
Rotate button to select clock display as either 24
hours or 12 hours AM/PM.
Step 9-Save settings
Press button once.
Now you are ready to set the time and day on
the controller.
7
8
9

10
Set weekday and clock
1
2
3
4
5
Set clock
1Hold the button for 3 seconds.
e symbol for setting of the clock and the
number of the weekday will be shown on the
display.
2Turn the button to the right or le. When the
time passes 0:00, the weekday number will
change 1 up/down depending on which way
you turn the button. e number you choose
will be the weekday of the current day of the
week. e numbers 1-7 do not correspond to
any specic days, so you can choose which
day of the week should be number 1, etc.
Example: If today is Tuesday and you select
2 on the display, Tuesday will be weekday
number 2.
124
12
618
21 3
15 9
8:45
฀฀2
24
12
618
21 3
15 9
0:00
3 sec.
User’s Guide - devireg™550 Thermostat

11
34
3 Set the clock to the current time by turning
the button to the right or le.
4Press the button to save the settings.

User’s Guide - devireg™550 Thermostat
12
Set temperature
1
2
3
4
5
Manual thermostat (Constant temperature)
By switching o the timer function you can set
the thermostat so it will maintain a constant
temperature (see how to switch timer on/o on
page 5). e setting with constant temperature
can be used when 24 hour heating is required or
for constantly lowering the temperature when
going on holiday. An unbroken clock ring indi-
cates constant temperature.
Fixed periods with lowering of temperature
By using the built-in timer you can set up xed
periods for each day of the week where the tem-
perature is lowered (e.g. at night and when you
are at work). is means automatic switching
between economy and comfort temperature.
Read more about how to set periods with lower-
ing of temperature on page 15.
When the timer is on, it is indicated by a timer
symbol in the form of a clock (and a clock ring if
periods with lowering of temperature have been
selected).
e display shows the required
temperature of the room. Outside the
set heating periods (clear segments of
the dial) the system will maintain a
minimum temperature which is controlled accor-
ding to the set-back level. is setting is pro-
grammed during conguration, (step 7, page 9).
e.g. If the requested temperature pr comfort level
is set to 20ºC, and the set back level (LO) is set
to -10ºC, the system will maintain a minimum
temperature of 10ºC. If the heating turns on
outside this period, please check set temperature
levels and congurations.”
20:0C

20:0 C

13
Set temperature
Switch timer function on/o
To switch the timer function on/o, press the
button. A timer symbol on the display indicates
that the timer function is on.
Bathroom and en-suite applications
With all bathroom and ensuite applications, the
thermostat will be located outside the room.
Because the thermostat is not located in the
room it is controlling, it will measure the oor
temperature via a oor sensor only. erefore

20:0 C

20:0C
5:0C
the display shows temperature on a scale of 1-10
rather than degrees C. Recommended settings
in this situation are 5-6, which is 25-30°C (oor
temperature). Each unit represents 5ºC of oor
temperature.
Raise temperature
Turn the button clockwise to raise the tempe-
rature.
Lower temperature
Turn the button anticlockwise to lower the
temperature.
Frost protection
To obtain frost protection, lower the tempera-
ture to a minimum of +5°C.
en a frost symbol will
appear on the display.
Timer mode Manual mode

User’s Guide - devireg™550 Thermostat
14
Set periods with lowering of temperature (timer)
1
2
3
4
5
e timer is not factory set.
1 Hold the button for 6 seconds.
e symbol for timer programming and the
weekday numbers are shown.
2 Select the weekday that you want to begin
with by turning the button until the wanted
weekday is shown. You can read more about
setting weekday on page 10.
3 Press the button once to choose weekday.
Now you are ready to begin dening periods. ฀฀฀฀฀฀00:00
฀00:00
฀1
2
3
6 sec.

15
Set periods with lowering of temperature
4 Turn the button clockwise to indicate the rst
time that normal temperatures are required
(comfort), e.g. 06:00. e clock uses 30-mi-
nute intervals.
5 Press the button.
6 Turn the button clockwise to indicate the
time when the temperature should be lowe-
red again. Black segments should then be
displayed, to indicate the desired settings.
e number of degrees e.g -30°C, is the
temperature the thermostat is lowered accor-
ding to, during an economy period. is will
have already been set during conguration.
7 Press the button.
8 Turn the button clockwise to the period
when normal temperature is required again,
e.g. 15:30.
Clear segments should now be displayed to
indicate the economy period set.
9 Press the button.
4
6
8
5
7
9
06:00
฀15:30
฀07:30
฀

User’s Guide - devireg™550 Thermostat
16
1
2
3
4
5
10 Turn the button clockwise once again to the
next time that you require a period with lowe-
ring temperature to begin., e.g. 22:30.
11 Press the button.
12 Turn the button clockwise to make settings
for the following weekday, and continue until
you have made period settings for all seven
weekdays.
Every time the clock passes midnight
(00.00), it changes over to the next weekday.
13 Finally, hold the button for 3 seconds to
save your settings and nish. e display will
automatically return to normal display.
With devireg™ 550 you only have to pro-
gramme the time when you want comfort
temperature and the time you want economy
temperature. e thermostat will do the rest. You
do not have to calculate when the heating should
start; devireg™ 550 will do this for you.
Please note: If at any point a mistake is made,
rotate the dial anticlockwise to the rst segment
and press the button to clear the markers.
10
11
12 22:30
฀00:00
฀13