Dewenwils HODT13F User manual

SKU: HODT13F
[Instruction Manual]
Outdoor Light Sensor Countdown Timer
with Lighting Program
Thank you for your purchase.
Please contact us if you have any questions.
We will get back to you within 24 hours.
Email: [email protected]
Please attach your Order ID so that
we can serve you better.

1. The timer must be mounted in a vertical position with the outlets facing
downward and at least 2ft above the ground level.
Note: The lighting program is suitable for those traditional tungsten lamps
or LED light strings only, NOT for those light strings built-in lighting programs
or power from motor devices.
2. Do not connect any devices which exceed the maximum ratings of the
timer.
3. Do not immerse in water.
4. Children are not allowed to use the timer without supervision.
5. Do not disassemble or repair the product, but only by authorized service
personnel.
6. Always unplug and store indoors when not in use.
WARNING
01
To reduce the risk of fire, electric shock or personal injury,
please strictly follow the instructions.
Product Layout
1
32
4
5

Operation
Notes
02
1. Timer dial: 2 to 8 hours or dusk to dawn and daily repeat function.
2. MODE: To select one of the following light set programs.
on→flash/fade→flash→chase
3. Sensor: Sensor will turn timer on at dusk and off at dawn.
4. LED indicator：
on- always on steady.
flash/fade-flashing and fading.
flash-flashing randomly.
chase-3 outlets flashing in turn（mode activated when 2 or 3 outlets
are used）.
5. Outlets: Plug the LED lamps or Tungsten lamps to be controlled by the
timer into outlet.
Rotate the dial on the timer to select one of the following settings:
OFF：No power
ON：Constant power
DUSK-DAWN：On at dusk, off at dawn automatically*
2 Hrs：On at dusk, stays on for 2 hours*
4 Hrs：On at dusk, stays on for 4 hours*
6 Hrs：On at dusk, stays on for 6 hours*
8 Hrs：On at dusk, stays on for 8 hours*
*Cycle repeats every 24 hours.
*The function will start instantly when you cover the lighting sensor by
moving the sensor switch.

Input Voltage:
- 125VAC,60Hz.
Max Power Rating For Each Receptacle:
- 125V, 60Hz, 337.5W, 2.7A.
Cord:
- SJTW 18/3 AWG.
Specifications
Safety Information
03
WARNING：The timer has 10 heat emission holes on the back,please do
not hang it upsides down in rainy day in case of water pouring.

One Year Limited Warranty
DEWENWILS warrants this product to be free from defects in material and
workmanship for a period of one year from the date of purchase.
Warranty is void if damage is caused by misuse or improper installation.
Email: [email protected].
Our dedicated customer service team will get back to you within 24 hours.
04