Dexcowin Cocoon Instruction manual

①Power On/Off Button
②Direction panel
③Exposure lamp
⑥Neck strap hook ring
④Trigger
⑤Safety lock
①Power ON/OFF button: Keep press power button till the device turn on or off
(about 2 seconds).
②Direction panel:
◀/▶direction panel –select each function of X-ray exposure setting.
▲/▼direction panel –change a value of the function of X-ray exposure setting.
③Exposure lamp: the lamp light is a green normally and it turns as orange on during
X-ray exposure.
④Neck strap hook ring: a hook for connecting Neck strap.
⑤Trigger: X-ray exposure trigger.
⑥Safety lock: safety option to avoid unintended X-ray exposure.
Part name of the main body How to use Cocoon
③Keep press power button for 2 seconds
to turn on the device.
②Select each function of X-ray exposure setting by
touch ◀/▶direction panel.
④Unlock a safety lock after X-ray exposure
setting. Lock- push lock button to right side,
unlock –push lock button to left side.
⑥When user pull the exposure trigger, a
device status on GUI will changed as “ready”
to “exposure”and LED lamp turned orange
and “beep”sound occurres.
⑦Keep press power button for 2 seconds to turn
off the device.
③Set value of the function of X-ray
exposure setting by ▲/▼direction
panel.

①Detector type: indicates detector type, PSP / Sensor / Film.
②Patient type: indicates patient type, Adult or Pedo.
③Teeth type: indicates teeth type, bitewing, canine, molar, incisor.
④Device status: indicates the tube status.
⑤Exposure setting time: indicates exposure time.
⑥Battery status: indicates a battery status.
How to charge the battery Main control screen consist
Setting screen consist
①Connect adapter DC jack to Cocoon
charging dock.
②Mount Cocoon on the charging dock as
below.
③The lamp of the charging dock and
adapter is light on as red during the
battery charging..
④The lamp of the charging dock and
adapter is light on as green when the
battery fully charged.
①Go to setting menu - Press ▲/▼direction touch panel at the same time.
Power save time: Device will turn off if the device not operates for a while. User can
set the term.
Sound effect: Decide to sound when user touches direction panel.
Explain product: play a voice quick user guide instruction.
F/W Version: indicates a firmware version of the device.
①
②
③
④
⑤
⑥

How to use neckstrap
Case Ⅰ
Case Ⅱ
②Put the external battery's output jack
into the undercover of sleeve.
①Move the label side of the external
battery to the magnetic part of the
neckstrap, external battery will stick to
the neckstrap.
③Hook the neckstrap hook to main
body's upside ring.
④Hook the other neckstrap hook to main
body's downside ring. And then
connect the external battery's DC jack
to main body's connector.
⑤Appearance after a neckstrap hooked
with the device.
⑥Use the neckstrap as shown below.
②Put the external battery's output jack
into the undercover of sleeve.
①Move the label side of the external
battery to the magnetic part of the
neckstrpa, external battery will stick to
the neckstrap.
④Hook the neckstrap hook to main
body's downside ring.
③Hook the other neckstrap hook to main
body's downside ring. And then
connect the external battery's DC jack
to main body's connector
⑤Appearance after a neckstrap hooked
with the deivce.
⑥Use the neckstrap as shown below.