Deye INGE User manual

Hybrid Inverter
SUN-7.6K-SG01LP1-US/EU
SUN-8K-SG01LP1-US/EU
SUN-6K-SG01LP1-US
SUN-5K-SG01LP1-US
User Manual
R
Add: No.26-30, South Yongjiang Road, Beilun, 315806, Ningbo, China
Fax: [phone]
Tel: [phone]
E-mail: [email protected]
Web: www.deyeinverter.com
<KX 

Contents Contents
9GLKZ_/TZXUJ[IZOUTY
6XUJ[IZOTYZX[IZOUTY
2.1 Product Overview
…………………………………………………
…………………………………………………
……………………………………………………………
……………………………………………………
…………………………………………………………… ……………………………………………………………………
…………………………………
………………………………………………
………………………………………………………………
2.2 Product Features
2.3 Basic System Architecture
/TYZGRRGZOUT
3.1 Parts list
3.2 Mounting instructions
3.3 Battery connection
3.5 PV Connection
3.4 AC Input/Output Connection
56+8':/54
4.1 Power ON/OFF
4.2 Operation and Display Panel
2)**OYVRG_/IUTY
5.1 Main Screen
5.2 Solar Power Curve


3UJK
,G[RZOTLUXSGZOUTGTJVXUIKYYOTM
2OSOZGZOUTUL2OGHOROZ_
*GZGYNKKZ







3.6 CT Connection
3.7 Earth Connection(mandatory)
3.8 WIFI Connection
3.9 Wiring System for Inverter
Contents
5.6 Battery Setup Menu
5.4 System Setup Menu
5.5 Basic Setup Menu
5.3 Curve Page-Solar & Load & Grid
5.7 System Work Mode Setup Menu
5.8 Grid Setup Menu
5.9 Generator Port Use Setup Menu
5.10 Advanced Function Setup Menu
5.11 Device Info Setup Menu
3.10 Single phase parallel connection diagram
3.11 Split phase parallel connection diagram
3.12 Three phase Parallel Inverter

1. Safety Introductions
2. Product Introduction
2.1 Product Overview
·This chapter contains important safety and operating instructions. Read and keep this
manual for future reference.
·Before using the inverter, please read the instructions and warning signs of the battery
and corresponding sections in the instruction manual.
·Do not disassemble the inverter. If you need maintenance or repair, take it to a
professional service center.
·Improper reassembly may result in electric shock or fire.
·To reduce risk of electric shock, disconnect all wires before attempting any
maintenance or cleaning. Turning off the unit will not reduce this risk.
·Caution: Only qualified personnel can install this device with battery.
·Never charge a frozen battery.
·For optimum operation of this inverter, please follow required specification to select
appropriate cable size.It is very important to correctly operate this inverter.
·Be very cautious when working with metal tools on or around batteries. Dropping a
tool may cause a spark or short circuit in batteries or other electrical parts,even cause
an explosion.
·Please strictly follow installation procedure when you want to disconnect AC or DC
terminals. Please refer to ”Installation” section of this manual for the details.
·Grounding instructions - this inverter should be connected to a permanent grounded
wiring system. Be sure to comply with local requirements and regulation to install this
inverter.
·Never cause AC output and DC input short circuited. Do not connect to the mains
when DC input short circuits.
This is a multifunctional inverter,combining functions of inverter, solar charger and
battery charger to offer uninterruptible power support with portable size. Its
comprehensive LCD display offers user configurable and easy accessible button operation
such as battery charging ,AC/solar charging, and acceptable input voltage based on
different applications.
1: Inverter Indicators
2: LCD display
3: Function Buttons
4: DC Switch
5: Power on/off button
6: RS 485 Port
7: CAN Port
8: Battery input connectors
9: Function Port
10: Parallel Box(master)
11: Parallel port
12: PV input with two MPPT
13: Grid
14: Generator input
15: Load
16: WiFi Interface

- 01 - - 02 -
















3. Installation
2.2 Product Features
2.3 Basic System Architecture
3.1 Parts List
· -220V Single phase,120V/240V Split phase Pure sine wave inverter.
· - Self-consumption and feed-in to the grid.
· - Auto restart while AC is recovering.
· - Programmable supply priority for battery or grid.
· - Programmable multiple operation modes:On grid,off grid and UPS.
· - Configurable battery charging current/voltage based on applications by LCD setting.
· - Configurable AC/Solar/Generator Charger priority by LCD setting.
· - Compatible with mains voltage or generator power.
· - Overload/over temperature/short circuit protection.
· - Smart battery charger design for optimized battery performance
· - With limit function,prevent excess power overflow to the grid.
· - Supporting WIFI monitoring and build-in 2 strings of MPP trackers
· -Smart settable three stages MPPT charging for optimized battery performance.
· -Time of use function.
· -Smart Load Function.
The following illustration shows basic application of this inverter.
It also includes following devices to have a Complete running system.
- Generator or Utility
- PV modules
Consult with your system integrator for other possible system architectures depending
on your requirements.
This inverter can power all kinds of appliances in home or office environment, including
motor type appliances such as refrigerator and air conditioner.
Check the equipment before installation. Please make sure nothing is damaged in the
package. You should have received the items in the following package:
No Description Qty
1
2
3
4
SUN-5K/6K-SG01LP1-US hybrid inverter
SUN-7.6K/8K-SG01LP1-US/EU hybrid inverter
Stainless steel expansion bolts M8*80
User manual
WiFi plug
1
4
1
1
123
67
45
4
- 03 - - 04 -
GridBackup Load
WiFI
GPRS
phoneCloud services
On-Grid Home Load
Generator
ATS
Grid-connected InverterSmart Load
CT
Battery
SolarWind
CT
AC cable DC cable
id
t
dI
t
ld i

3.2 Mounting instructions
Considering the following points before selecting where to install:
Mounting the inverter
Installation Precaution
This Hybrid inverter is designed for outdoor use(IP65),Please make sure the installation
site meets below conditions:
Please AVOID direct sunlight, rain exposure, snow laying up during installation and
operation. Before connecting all wires,please take off the metal cover by removing
screws as shown below:
· Not in direct sunlight
· Not in areas where highly flammable materials are stored.
· Not in potential explosive areas.
· Not in the cool air directly.
· Not near the television Antenna or antenna cable.
· Not higher than altitude of about 2000 meters above sea level.
· Not in environment of precipitation or humidity(>95%)
· The ambient temperature should be between -25~60℃ to ensure optimal operation.
· Be sure to keep other objects and surfaces as shown in the diagram to guarantee
sufficient heat dissipation and have enough space for removing wires.
· Please select a vertical wall with load-bearing capacity for installation, suitable for
installation on concrete or other non-flammable surfaces,installation is shown below.
· Install this inverter at eye level in order to allow the LCD display to be read at all times.
For proper air circulation to dissipate heat, allow a clearance of approx. 50cm to the side
and approx.50cm above and below the unit.And 100cm to the front.
Remember that this inverter is heavy!Please be careful when lifting out from the package.
Choose the recommend drill head(as shown in below pic) to drill 4 holes on the wall,
52-60mm deep.
1. Use a proper hammer to fit the expansion bolt into the holes.
2. Carry the inverter and holding it,make sure the hanger aim at the expansion bolt,fix the
inverter on the wall.
3. Fasten the screw head of the expansion bolt to finish the mounting.
≥500mm
≥500mm
Chart 3-1 Parts List
Current transformer (Optional)
Battery sensor
L-type Hexagon wrench
2(US)/1(EU)
1
1
5
6
7
- 05 - - 06 -